Instrukcja obsługi miksera stereo XLR do mikrofonu i linii Rolls MX401 4-kanałowego

1. Wprowadzenie

The Rolls MX401 is a compact and versatile 4-channel XLR Mic/Line Stereo Mixer designed for robust live and studio mixing applications. This manual provides detailed instructions to ensure proper setup, operation, and maintenance of your MX401 unit, allowing you to achieve optimal audio performance.

2. Koniec produktuview

The MX401 features four independent XLR inputs, each with dedicated controls for level, pan, and mic/line-level switching. It also includes individual phantom power for condenser microphones. The unit offers balanced XLR outputs and a 3.5mm stereo output for flexible connectivity. A convenient clip indicator light assists in setting appropriate input levels.

Główne cechy:

• 4 Balanced XLR Inputs
• Individual Level Control per Channel
• Individual Pan Control per Channel
• Mic/Line Level Switching per Channel
• Individual Phantom Power per Channel
• Master Output Level Control
• Kontrolka klipu
• 2 Balanced XLR Outputs
• 1 x 3.5mm Stereo Output
• DC Power Supply or 9V Battery Operation

Rysunek 1: Widok z góry na dół view of the Rolls MX401 mixer, showing input and output labels.

Figure 2: Front panel of the Rolls MX401 mixer, displaying channel controls, output level, and power switch.

3. Konfiguracja

3.1 Zasilanie jednostki

The MX401 can be powered using the included DC power supply or two 9V batteries. Ensure the unit is switched OFF before connecting power.

• Zasilanie DC: Connect the included DC power supply to the 'VDC' input jack on the front panel. Plug the power supply into an appropriate AC outlet.
• Moc baterii: Open the battery compartment on the side of the unit and insert two fresh 9V batteries, observing correct polarity. Close the compartment securely.

3.2 Connecting Microphones and Line Inputs

The MX401 features four XLR inputs, each capable of accepting either microphone or line-level signals.

1. Connect your microphones or line-level devices to the XLR INPUTs (CH 1-4) on the rear panel.
2. For each channel, use the MIKROFON/LINIA switch to select the appropriate input level:
• Zabierać się do pracy MIKROFON for microphones.
• Zabierać się do pracy LINIA for line-level devices (e.g., keyboards, CD players).
3. If using condenser microphones, activate MOC FANTOMOWA for the respective channel by pressing the PHANTOM POWER button. The LED will illuminate when active.

3.3 Podłączanie wyjść

The MX401 provides balanced XLR outputs and a 3.5mm stereo output.

• Connect your main audio system (e.g., power amplifier, recording device) to the balanced XLR OUTPUTS (LEFT, RIGHT) na tylnym panelu.
• For connecting to consumer-grade audio equipment or headphones, use the 3.5mm STEREO OUTPUT gniazdo na panelu przednim.

4. Instrukcja obsługi

4.1 Włączanie/wyłączanie zasilania

Po wykonaniu wszystkich połączeń przełącz ZASILANIE WŁĄCZ / WYŁĄCZ toggle on the front panel to the ON position. The 'pwr' LED will illuminate.

4.2 Kontrola kanałów

Each of the four input channels (CH 1-4) has independent controls:

• POZIOM: Adjusts the input gain for the respective channel. Start with this knob fully counter-clockwise and slowly increase it until the desired volume is achieved without clipping.
• PATELNIA: Controls the stereo positioning of the channel's signal between the Left and Right outputs. Turn clockwise for more Right signal, counter-clockwise for more Left signal, and center for an even spread.
• Przełącznik MIC/LINE: Selects between microphone-level and line-level input sensitivity.
• PHANTOM POWER Button: Activates +48V phantom power for condenser microphones connected to that channel.

4.3 Kontrola poziomu wyjściowego

The master output level is controlled by the POZIOM WYJŚCIOWY knob on the front panel. Adjust this to set the overall volume of the mixed signal sent to the outputs.

4.4 Clip Indicator

Ten KLIPS LED on the front panel illuminates when the input or output signal is too high, indicating potential distortion. If the CLIP LED lights up, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until the LED no longer illuminates during peak signal levels.

5. Konserwacja

To ensure the longevity and optimal performance of your Rolls MX401, follow these maintenance guidelines:

• Czyszczenie: Do czyszczenia zewnętrznej części urządzenia należy używać miękkiej, suchej ściereczki. Unikaj stosowania środków ściernych, rozpuszczalników i wosków, ponieważ mogą one uszkodzić powłokę.
• Składowanie: Jeśli mikser nie będzie używany przez dłuższy czas, należy przechowywać go w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
• Wymiana baterii: If using battery power, replace batteries when the 'pwr' LED dims or the unit ceases to function. Remove batteries if the unit will not be used for a long time to prevent leakage.
• Wentylacja: Zapewnij odpowiednią wentylację wokół urządzenia, aby zapobiec przegrzaniu. Nie blokuj otworów wentylacyjnych.

6. Rozwiązywanie Problemów

If you encounter issues with your MX401, refer to the following common troubleshooting steps:

• Brak zasilania:
  • Check if the DC power supply is securely connected and plugged into a working outlet.
  • If using batteries, ensure they are fresh and inserted with correct polarity.
  • Verify the POWER ON-OFF switch is in the ON position.
• Brak dźwięku:
  • Confirm all input and output cables are securely connected.
  • Check that the input device is powered on and sending a signal.
  • Ensure channel LEVEL knobs and the master OUTPUT LEVEL knob are turned up.
  • Verify the MIC/LINE switches are set correctly for your input devices.
  • If using condenser microphones, ensure PHANTOM POWER is activated for the respective channels.
  • Check the volume and input selection on your connected audio system.
• Zniekształcony dźwięk / przycinanie:
  • If the CLIP LED illuminates, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until it no longer lights up.
  • Ensure the MIC/LINE switches are correctly set. Using MIC setting for a line-level device can cause distortion.
• Szum lub szum:
  • Upewnij się, że wszystkie kable są w dobrym stanie i odpowiednio ekranowane.
  • Try using balanced XLR cables for inputs and outputs to minimize noise.
  • Avoid running audio cables parallel to power cables.

7. Specyfikacje

8. Gwarancja i wsparcie

For warranty information, technical support, or service inquiries regarding your Rolls MX401 mixer, please refer to the documentation included with your purchase or visit the official Rolls website. Contacting the manufacturer directly will provide the most accurate and up-to-date assistance.