MXR Phase 90 50th-Anniversary Pedal Instruction Manual

Wstęp

This manual provides instructions for the proper setup, operation, and maintenance of your MXR Phase 90 50th-Anniversary Pedal. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Informacje dotyczące bezpieczeństwa

• Use only the specified power adapter (9 Volts DC, 2.1mm barrel connector, center-negative).
• Do not expose the pedal to moisture or extreme temperatures.
• Do not attempt to open or modify the pedal casing.
• Przechowywać w miejscu niedostępnym dla dzieci.

Produkt ponadview

The MXR Phase 90 is a classic phaser guitar effects pedal known for its distinctive modulation sound. This 50th-anniversary edition features a special gold finish and simple, single-knob operation.

Obraz: widok z góry view of the MXR Phase 90 50th-Anniversary Pedal. The pedal is gold-colored with a single black 'SPEED' knob on the top left, an input jack on the right side, an output jack on the left side, and a footswitch with an LED indicator in the center. The MXR logo and 'phase 90' are visible on the top surface.

Organizować coś

1. Podłączenie zasilania: Connect a 9-volt DC AC adapter (not included) to the power input jack on the side of the pedal. Ensure the adapter has a 2.1mm barrel connector and center-negative polarity.


Obraz: Bok view of the MXR Phase 90 50th-Anniversary Pedal showing the power input jack (left) and the instrument input jack (right). The pedal is gold with a black 'SPEED' knob visible on the top surface.

2. Wejście instrumentu: Connect your instrument (e.g., guitar) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Amplifier Wyjście: Podłącz gniazdo OUTPUT znajdujące się po lewej stronie pedału do swojego amplifier lub kolejny pedał w torze sygnałowym przy użyciu standardowego kabla instrumentalnego 1/4-calowego.

Obraz: Góra view of the MXR Phase 90 50th-Anniversary Pedal, highlighting the 'INPUT' and 'OUTPUT' labels near the respective jacks. The gold finish and black 'SPEED' knob are prominent.
4. Umieszczenie: Place the pedal on a stable surface or integrate it into your pedalboard.

Instrukcja obsługi

Sterownica

• Pokrętło prędkości: This is the only control on the Phase 90. Turning the knob clockwise increases the speed of the phasing effect, while turning it counter-clockwise decreases the speed. Experiment with different settings to achieve various modulation sounds, from subtle sweeps to fast, watery warbles.


Obraz: Zbliżenie view of the black 'SPEED' knob on the MXR Phase 90 pedal. The knob has a white indicator line for setting the phase speed.

• Przełącznik nożny: Press the footswitch to engage or bypass the phasing effect. The LED indicator will illuminate when the effect is active.

Obraz: Zbliżenie view of the chrome footswitch and the small red LED indicator on the MXR Phase 90 pedal. The footswitch is used to activate or deactivate the effect.

Podstawowa obsługa

1. Ensure all connections (power, input, output) are secure.
2. Włącz swój ampliyfikator.
3. Press the footswitch to activate the Phase 90. The LED will light up.
4. Adjust the SPEED knob to achieve your desired phasinefekt g.
5. To bypass the effect, press the footswitch again. The LED will turn off.

Konserwacja

• Czyszczenie: Przetrzyj pedał miękką, suchą ściereczką. Nie używaj środków czyszczących ani rozpuszczalników o działaniu ściernym.
• Składowanie: Store the pedal in a dry environment, away from direct sunlight and extreme temperatures, when not in use.
• Wymiana baterii: This pedal is designed for AC adapter use. There is no internal battery compartment.

Rozwiązywanie problemów

Brak dźwięku

• Sprawdź wszystkie połączenia kablowe (instrument, amplifier, moc).
• Ensure the power adapter is correctly connected and providing power (LED should light up when engaged).
• Test with different cables and a different power supply if available.
• Bypass the pedal to confirm your instrument and amplifiery działają poprawnie.

Efekt nie jest angażujący

• Ensure the power adapter is connected and functional.
• Press the footswitch firmly. The LED should illuminate when the effect is active.

Niepożądany hałas

• Upewnij się, że wszystkie kable są ekranowane i w dobrym stanie.
• Check for ground loops in your setup. Try isolating the power supply.
• Ensure the power adapter is rated correctly for the pedal (9V DC, center-negative).

Specyfikacje

Informacje o gwarancji

This MXR product is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair. Please retain your proof of purchase for warranty claims.

Wsparcie

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact MXR customer support through their official website or authorized service centers. Refer to the MXR webna tej stronie znajdziesz najbardziej aktualne dane kontaktowe.