1. Koniec produktuview
The M5Stack ATOMS3 Dev Kit is a compact and powerful programmable controller designed for IoT devices and embedded systems. It integrates an ESP32-S3FN8 chip, a 0.85-inch IPS screen, programmable buttons, and a 6-axis gyro sensor (MPU6886) to provide versatile functionality for various applications.
Its small form factor and integrated features make it suitable for rapid prototyping and development in areas such as IIoT, home automation, smart retail, and STEM education.
Obraz 1.1: M5Stack ATOMS3 Dev Kit with key components labeled, including the 0.85-inch IPS LCD, ESP32-S3, MPU6886, IR LED, USB-C port, and Port.A (HY2.0-4P).
2. Zawartość opakowania
The M5Stack ATOMS3 Dev Kit package includes the following items:
- 1x AtomS3 unit
Obraz 2.1: Visual representation of the AtomS3 unit included in the package.
3. Konfiguracja początkowa
3.1 Włączanie i łączność
The ATOMS3 Dev Kit is powered and programmed via its USB-C port. Connect the device to a computer or a 5V power adapter using a compatible USB-C cable.
- Port USB-C: Used for both power supply and data communication (programming).
- Port A (HY2.0-4P): Provides I2C, GPIO, ADC, and UART interfaces for connecting external modules and sensors.
Obraz 3.1: Z bliska view of the ATOMS3 showing the USB-C port for power and programming, and the HY2.0-4P Port.A for expansion.
4. Podstawowa obsługa
4.1 Wyświetlacz i interfejs użytkownika
The ATOMS3 features a 0.85-inch IPS screen (128x128 resolution) for visual feedback and programmable buttons for user interaction. The screen can display various information, while the buttons allow for custom controls within your programmed applications.
- Ekran IPS 0.85 cala: Provides clear visual output for data, status, or simple graphics.
- Przyciski programowalne: Located below the screen, these buttons can be assigned functions within your code.
- Przycisk resetowania: A dedicated reset button is available for restarting the device. Pressing it initiates a reset. Holding it for 2 seconds will put the device into GO->LOW mode.
Obraz 4.1: The ATOMS3 unit, illustrating its compact size and highlighting the programmable button and 0.85-inch LCD screen.
4.2 Zintegrowane czujniki
The device includes a 6-axis gyro sensor (MPU6886) for motion detection and orientation tracking, expanding its capabilities for interactive projects.
5. Specyfikacje techniczne
| Specyfikacja | Parametr |
|---|---|
| Układ SoC | ESP32-S3FN8 |
| Błysk | 8MB |
| Prąd stały-prąd stały | SY8089 |
| IMU | MPU6886 (I2C Address: 0x68) |
| TFT Driver IC | GC9107 |
| Rezolucja | 128x128 |
| Temperatura pracy | 0 ~ 40°C |
| Zasilacz | 5V |
| Wymiary | 24 × 24 × 13 mm (0.94 × 0.94 × 0.51 cala) |
| Waga | 0.187 uncji |
| Typ bezprzewodowy | Infrared, WiFi |
| System operacyjny | Arduino, UIFLOW2.0, MicroPython |
Obraz 5.1: Detailed technical specifications for the M5Stack ATOMS3 Dev Kit.
Obraz 5.2: Physical dimensions of the M5Stack ATOMS3 Dev Kit (24mm x 24mm x 12.9mm).
Obraz 5.3: The M5Stack ATOMS3 Dev Kit on a digital scale, indicating its light weight of 6.9 grams.
6. Konserwacja
To ensure the longevity and optimal performance of your M5Stack ATOMS3 Dev Kit, follow these maintenance guidelines:
- Utrzymuj urządzenie w czystości, bez kurzu i zanieczyszczeń. Do czyszczenia używaj miękkiej, suchej ściereczki.
- Unikaj wystawiania urządzenia na działanie ekstremalnych temperatur, wilgoci lub bezpośredniego światła słonecznego.
- Obchodź się z urządzeniem ostrożnie, aby uniknąć uszkodzeń fizycznych.
- W przypadku dłuższej pracy należy zapewnić odpowiednią wentylację.
7. Rozwiązywanie Problemów
If you encounter issues with your ATOMS3 Dev Kit, consider the following common troubleshooting steps:
- Urządzenie się nie włącza: Ensure the USB-C cable is securely connected to a reliable 5V power source or computer.
- Błędy programowania: Verify that the correct drivers are installed on your computer and that your development environment (e.g., Arduino IDE) is configured for the ESP32-S3 chip. Check cable integrity.
- Ekran nie wyświetla: Confirm the device is powered on. If using custom code, ensure the display initialization is correct.
- Sensor issues: Check your code for correct sensor initialization and data reading. Ensure no physical obstructions are affecting the sensor.
- Connectivity problems (WiFi): Verify network credentials in your code. Ensure the device is within range of the WiFi network.
For more detailed troubleshooting and specific error codes, refer to the official M5Stack documentation and community forums.
8. Wsparcie i zasoby
M5Stack provides extensive resources for developers and users. For tutorials, documentation, and community support, please visit the official M5Stack webstrona.
8.1 Dostęp do samouczków
To find tutorials and detailed documentation for your ATOMS3 Dev Kit:
- Visit the official M5Stack webstrona: m5stack.com
- Click on the "DOCUMENT" section.
- Szukaj your product (ATOMS3).
- Scroll down to find the "Tutorial" section for guides and examples.
Obraz 8.1: Step-by-step guide to finding product tutorials on the M5Stack webstrona.
8.2 Informacje o gwarancji
For information regarding product warranty and return policies, please refer to the purchase platform or contact M5Stack Official Store directly. Standard return policies typically allow for returns within 30 days of purchase.