HelloBaby Monitor Mount User Manual

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your HelloBaby Monitor Mount. This flexible mount is specifically designed for use with HelloBaby monitor cameras, including models HB65, HB66, HB6250, HB6550, and HB6339. It offers a versatile solution for positioning your baby monitor without the need for tools or causing damage to walls or furniture.

Przed instalacją należy dokładnie przeczytać tę instrukcję i zachować ją do wykorzystania w przyszłości.

Informacje dotyczące bezpieczeństwa

• Ensure the mount is securely attached to a stable surface to prevent the camera from falling.
• Keep the monitor mount and camera power cords out of reach of children to avoid strangulation hazards.
• Do not place the mount or camera directly above the baby's sleeping area. Position it to the side, ensuring a clear view.
• Regularly check the mount's stability and the camera's attachment.
• Produkt przeznaczony jest wyłącznie do użytku wewnątrz pomieszczeń.

Zawartość opakowania

Sprawdź, czy wszystkie komponenty są obecne:

• 1 x HelloBaby Flexible Monitor Mount

Note: Baby monitor camera is sold separately.

Instrukcje konfiguracji

Follow these steps to install your HelloBaby Monitor Mount:

1. Zamocuj kamerę: Locate the 1/4-inch screw on the mount. Align the screw with the threaded hole on the bottom of your HelloBaby monitor camera. Twist the camera clockwise onto the screw until it is securely fastened. Ensure the camera is stable and does not wobble.



2. Pozycja mocowania: Identify a suitable location such as a crib railing, shelf, or metal pole. The flexible gooseneck design allows it to wrap around various surfaces.
3. Zabezpiecz mocowanie: Bend and rotate the flexible gooseneck to wrap it firmly around the chosen surface. Ensure the mount is tight and stable, preventing any movement or slippage. The mount should be positioned so that the camera has a clear and unobstructed view żądanego obszaru.



4. Dostosuj kąt kamery: Once the mount is secure, adjust the camera's angle to achieve the optimal viewing perspective of your infant.

Instrukcja obsługi

The HelloBaby Monitor Mount is designed for ease of use and flexibility:

• Naregulowanie View: To change the camera's position or angle, gently bend and reshape the flexible gooseneck. Always ensure the mount remains securely attached to its surface after adjustment.
• Zmiana położenia: If you need to move the camera to a different location, carefully unwrap the mount from its current position and re-secure it at the new desired spot following the setup instructions.

Konserwacja

• Czyszczenie: Przetrzyj uchwyt miękką ściereczką.amp płótno. Nie używaj ostrych środków chemicznych ani ściernych środków czyszczących.
• Kontrola: Periodically inspect the mount for any signs of wear or damage. If any damage is observed, discontinue use and replace the mount.

Rozwiązywanie problemów

Issue: Mount is not stable or slips.

Rozwiązanie: Ensure the gooseneck is wrapped tightly around the surface. Try repositioning it on a surface with better grip. Avoid overly smooth or narrow surfaces that may not provide adequate friction.

Issue: Camera view jest zablokowana.

Rozwiązanie: Adjust the gooseneck to change the camera's position. Ensure no crib bumpers, blankets, or other objects are blocking the camera's line of sight.

Issue: Camera feels loose on the mount.

Rozwiązanie: Tighten the camera onto the 1/4-inch screw by twisting it clockwise until it is firm. Do not overtighten.

Specyfikacje

Gwarancja i wsparcie

For warranty information and customer support, please refer to the official HelloBaby webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon jako dowód zakupu.

You can visit the official HelloBaby store for more products and support: HelloBaby Official Store