Instrukcja obsługi stojaka na dwa monitory MOUNT PRO

Wstęp

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your MOUNT PRO Dual Monitor Stand. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use will ensure the longevity and optimal performance of your monitor stand.

Ważne informacje dotyczące bezpieczeństwa

OSTRZEŻENIE:

• Do not exceed the weight capacity of 17.6 lbs (8 kg) per arm. Exceeding this limit may result in serious injury or property damage.
• This product is designed for monitors between 13 and 27 inches. Ensure your monitors meet these specifications.
• Zawsze należy upewnić się, że stojak jest umieszczony na stabilnej, równej powierzchni.
• When installing monitors, it is recommended to have two people to prevent tipping. Attach both monitors simultaneously to balance the weight.
• Trzymaj wszystkie małe części z dala od dzieci.
• Sprawdzaj okresowo wszystkie połączenia, aby mieć pewność, że są bezpieczne.

Zawartość opakowania

Verify that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, please contact MOUNT PRO customer support.

Obraz: Ponadview of the MOUNT PRO Dual Monitor Stand, showing the base, central pole, monitor arms, and VESA plates. A smartphone is placed in the base's integrated holder.

Lista komponentów:

• Baza (1)
• Central Pole (1)
• Ramiona do monitora (2)
• Płyty VESA (2)
• Cable Management Clips (2)
• Zestaw narzędzi (śruby, podkładki, klucze imbusowe)

Konfiguracja i instalacja

Follow these steps carefully for proper assembly and installation of your dual monitor stand.

Step 1: Attach the Central Pole to the Base

1. Umieść podstawę na płaskiej, stabilnej powierzchni.
2. Insert the central pole into the designated slot on the base.
3. Secure the pole to the base using the provided screws and Allen wrench from the hardware kit. Ensure it is tightened firmly.

Image: Diagram showing the central pole being inserted into the stand's base and secured with screws.

Step 2: Attach Monitor Arms to the Central Pole

1. Slide the monitor arms onto the central pole at your desired height.
2. Skorzystaj z dostarczonego klamp and screws to secure the arms in place. Do not overtighten initially, as height adjustments may be needed later.

Image: Diagram illustrating how to slide the monitor arms onto the central pole and secure them with a clamp.

Krok 3: Przymocuj płytki VESA do monitorów

1. Aby zapobiec porysowaniu, ostrożnie połóż monitor ekranem do dołu na miękkiej i czystej powierzchni.
2. Dopasuj płytkę VESA do otworów montażowych znajdujących się z tyłu monitora (75 x 75 mm lub 100 x 100 mm).
3. Secure the VESA plate to the monitor using the appropriate screws and washers from the hardware kit. Do not overtighten.

Image: An illustration demonstrating VESA mounting patterns (75x75mm and 100x100mm) on the back of a monitor and a detached VESA plate.

Step 4: Mount Monitors onto the Arms

1. With assistance, carefully lift each monitor and slide the VESA plate attached to the monitor onto the monitor arm's mounting bracket.
2. Ensure both monitors are mounted simultaneously to maintain balance and prevent the stand from tipping.
3. Secure the monitors to the arms using the locking mechanism or screws as indicated in the detailed installation manual (PDF link provided in product documents).

Image: A person wearing headphones working at a desk with two monitors mounted on the stand, demonstrating the stand's ability to hold screens up to 17.6 lbs each.

Krok 5: Zarządzanie kablami

1. Route your monitor cables (power, HDMI, DisplayPort, etc.) along the monitor arms and down the central pole.
2. Use the provided cable management clips to keep the cables tidy and organized.

Obraz: Tył view of the dual monitor stand showing cables neatly routed and secured with cable management clips along the arms and central pole.

Instrukcja obsługi

The MOUNT PRO Dual Monitor Stand offers various adjustments to optimize your viewzdobywania doświadczenia.

Regulacja wysokości

To adjust the height of your monitors, loosen the clamp on the central pole, slide the monitor arms up or down to the desired position, and then re-tighten the clamp firmly. Ensure both monitors are at a comfortable ergonomic height.

Image: Two monitors on the stand, with arrows indicating vertical movement for height adjustment.

Regulacja nachylenia

The monitors can be tilted from -90° to +70°. Loosen the tilt adjustment screw on the VESA plate, adjust the monitor to your preferred angle, and then re-tighten the screw to secure it.

Image: A monitor on the stand demonstrating the tilt range from -90° to +70° and 360° rotation capabilities.

Regulacja obrotu

Each monitor arm allows for a swivel range of -90° to +90°. Gently rotate the monitor to the left or right to achieve the desired viewing angle. The arms can also swivel at their connection points to the central pole.

Image: Two monitors on the stand, with one swiveled to an angle, illustrating the -90° to +90° swivel capability.

Regulacja rotacji

Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor at the VESA plate connection point until it clicks into the desired orientation.

Image: Four different configurations of dual monitors on the stand, showcasing various customization options including landscape, portrait, and staggered arrangements.

Konserwacja

• Czyszczenie: Przetrzyj stojak miękką szmatką.amp ściereczką. Unikaj stosowania środków czyszczących o działaniu ściernym lub rozpuszczalników, które mogłyby uszkodzić wykończenie.
• Kontrole okresowe: Regularly check all screws and connections to ensure they are tight and secure. Loose connections can affect stability and performance.
• Smarowanie: Części ruchome nie wymagają smarowania.

Rozwiązywanie problemów

Issue: Stand is unstable or tips over.

• Rozwiązanie: Ensure the base is on a completely flat and stable surface. Verify that all screws, especially those connecting the pole to the base and the arms to the pole, are securely tightened. When mounting monitors, ensure both are attached simultaneously to balance the weight. Do not exceed the maximum weight capacity per arm.

Issue: Monitors are not level.

• Rozwiązanie: Check the VESA plate attachment to the monitor and the arm. Loosen the tilt adjustment screw, adjust the monitor to be level, and re-tighten. Ensure the monitor arms are at the same height on the central pole.

Issue: Difficulty adjusting monitor position (tilt, swivel, rotation).

• Rozwiązanie: Some adjustments may require loosening a screw with an Allen wrench before moving the monitor, then re-tightening to secure the position. Refer to the specific adjustment section in this manual.

Problem: Kable są plątaniną.

• Rozwiązanie: Utilize the provided cable management clips to route cables neatly along the monitor arms and down the central pole.

Specyfikacje

Image: Technical drawing showing key dimensions of the monitor stand, including height (18.4"), base width (15.8"), and base depth (11").

Gwarancja i obsługa klienta

MOUNT PRO products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MOUNT PRO website. If you encounter any issues or have questions regarding your dual monitor stand, please contact MOUNT PRO customer support for assistance.

Możesz również zapoznać się z Instrukcja instalacji (PDF) w celu uzyskania dodatkowych wskazówek.