1. Koniec produktuview
The WALI DOW-SOL Solar Fake Security Camera is designed to provide a visual deterrent against potential intruders. This wireless dummy dome camera simulates the appearance and function of a real surveillance camera, featuring a flashing red LED light. It operates using dual power sources: an integrated solar panel for charging during daylight and two AA batteries (not included) for continuous operation, especially during nighttime or low-light conditions. Its weatherproof construction allows for both indoor and outdoor installation.
Rycina 1: Przód view of the WALI Solar Fake Security Camera.
Wideo 1: Ponadview of the WALI Solar Powered Fake Security Camera, demonstrating its features and installation.
2. Zawartość opakowania
Przed przystąpieniem do instalacji należy sprawdzić, czy wszystkie komponenty są obecne.
- 1 x WALI Dome Simulation Camera (White)
- 3 x śruby montażowe
- 3 x kotwy ścienne
- 1 x Warning Security Alert Sticker Decal
- Note: 2 pcs AA batteries are required and are NOT included.
Figure 2: Diagram showing the included components and product dimensions.
3. Konfiguracja i instalacja
Follow these steps for proper installation of your WALI Solar Fake Security Camera.
- Przygotuj kamerę: Gently rotate the camera section to access the battery compartment.
- Zainstaluj baterie: Insert two (2) AA batteries (not included) into the battery compartment, ensuring correct polarity. Close the compartment securely.
- Wybierz miejsce montażu: Choose a suitable location for installation. The camera can be mounted indoors or outdoors. For optimal solar charging, select a spot that receives direct sunlight for several hours daily.
- Zaznacz punkty wiercenia: Hold the camera's mounting base against the desired surface and mark the positions for the three screw holes using a pencil.
- Wywierć otwory pilotażowe: Drill pilot holes at the marked points. If mounting on a masonry or concrete surface, insert the provided wall anchors into the pilot holes.
- Zamontuj kamerę: Align the camera's mounting base with the drilled holes. Secure the camera to the wall or ceiling using the provided screws.
- Dostosuj kąt: Adjust the camera's angle to the desired position. The camera offers a ±90° tilt adjustment.
- Apply Warning Sticker: Place the warning security alert sticker decal in a visible location near the dummy camera to enhance its deterrent effect.
Figure 3: Visual guide for battery insertion and mounting the camera.
Figure 4: Illustrates the adjustable tilt feature of the camera.
4. Działanie
The WALI Solar Fake Security Camera is designed for simple, continuous operation.
- Migająca dioda LED: Once batteries are installed, the red LED light on the front of the camera will begin to flash, simulating active surveillance.
- Energia słoneczna: The integrated solar panel charges the installed AA batteries during daylight hours, extending battery life and ensuring continuous operation.
- Zapas baterii: When solar power is insufficient (e.g., at night or on cloudy days), the camera automatically draws power from the AA batteries.
- Odporna na warunki atmosferyczne konstrukcja: The camera's IP65 water-resistant rating ensures reliable performance in various weather conditions, including rain and sun exposure.
Figure 5: Depicts the dual power operation (solar and battery).
Figure 6: Close-up of the flashing red LED light, enhancing realism.
5. Konserwacja
To ensure optimal performance and longevity of your dummy camera, follow these simple maintenance guidelines:
- Wyczyść panel słoneczny: Okresowo przecieraj panel słoneczny miękką,amp ściereczką, aby usunąć kurz, brud i zanieczyszczenia, które mogą blokować światło słoneczne i zmniejszać wydajność ładowania.
- Sprawdź baterie: Although solar-powered, it is recommended to check the AA batteries every 6-12 months, especially if the flashing LED appears dim or stops working. Replace with fresh batteries if needed.
- Sprawdź montaż: Occasionally check that the camera is securely mounted and that screws are tight.
- Czysty wygląd zewnętrzny: Wipe the camera's exterior with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive cleaners.
6. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Dioda LED nie miga |
|
|
| Camera appears loose after installation |
|
|
| Panel słoneczny nie ładuje się efektywnie |
|
|
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | WALI |
| Nazwa modelu | Dummy Camera (DOW-SOL) |
| Technologia łączności | Wireless (Simulated) |
| Funkcja specjalna | Built-in Flashing Red LED Light, Solar Powered |
| Zastosowanie wewnątrz/na zewnątrz | Wewnątrz, Na zewnątrz |
| Typ mocowania | Montaż ścienny |
| Kolor | Biały |
| Współczynnik kształtu | Kopuła |
| Poziom wodoodporności | Wodoodporność (IP65) |
| Źródło zasilania | Solar Powered, 2x AA Batteries (not included) |
| Pozycja Wymiary (dł. x szer. x wys.) | 7.36 x 5.21 x 4.9 cala |
| Waga przedmiotu | 0.34 kilograma |
| UPC | 811278025721 |
8. Gwarancja i pomoc techniczna
Gwarancja producenta: This WALI product comes with a 12-month warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Obsługa klienta: For any questions, assistance with installation, or troubleshooting, please contact WALI customer support. Experienced and friendly US-based customer support is available to assist 7 days a week.
For more information, visit the official WALI webodwiedź witrynę lub zapoznaj się z dokumentacją zakupu, aby uzyskać dane kontaktowe.