Wstęp
This manual provides essential information for the safe and efficient use of your Parkside 20V 2Ah PAP 20 B1 rechargeable battery and PLG 20 C1 charger. This battery and charger set is designed for use with all tools in the Parkside X 20V Team Series. Please read these instructions carefully before first use and keep them for future reference.
Ogólne instrukcje bezpieczeństwa
WARNING! Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
Bezpieczeństwo baterii i ładowarki
- Ładowanie: Charge only with the charger specified by the manufacturer. A charger suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Zgodność narzędzi: Używaj elektronarzędzi wyłącznie z specjalnie przeznaczonymi akumulatorami. Używanie innych akumulatorów może stwarzać ryzyko obrażeń i pożaru.
- Składowanie: Keep the battery pack away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Wyciek cieczy: Liquid may be ejected from the battery during improper use; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
- Uszkodzone baterie: Do not use a damaged or modified battery pack with the tool. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Narażenie na temperaturę: Do not expose the battery pack or tool to fire or excessive temperature. Exposure to fire or temperatures above 130°C (265°F) may cause an explosion.
- Środowisko ładowania: Postępuj zgodnie ze wszystkimi instrukcjami ładowania i nie ładuj akumulatora ani narzędzia poza zakresem temperatur określonym w instrukcji. Ładowanie w niewłaściwy sposób lub w temperaturach poza określonym zakresem może uszkodzić akumulator i zwiększyć ryzyko pożaru.
- Charger Instructions: Observe the safety instructions of compatible chargers.
Serwis i naprawa
- Oddaj elektronarzędzie do naprawy przez wykwalifikowanego technika naprawczego przy użyciu tylko identycznych części zamiennych. Zapewni to utrzymanie bezpieczeństwa elektronarzędzia.
- Never attempt to repair a damaged battery pack. Repair of battery packs should only be performed by the manufacturer or authorized service providers.
Dodatkowe ostrzeżenia
- UWAGA! RYZYKO WYBUCHU!
- Nigdy nie ładuj baterii jednorazowych.
- Protect the battery from heat, e.g., from continuous sunlight, fire, water, and moisture. Risk of explosion.
Image: Detailed safety instructions for the Parkside battery and charger.
Produkt ponadview
The Parkside PAP 20 B1 battery and PLG 20 C1 charger are integral components of the Parkside X 20V Team Series, offering reliable power for a wide range of compatible tools.
Główne cechy
- Powerful Lithium-Ion battery with 3-stage charge indicator.
- Cell Balancing technology for longer battery runtime and increased battery life.
- Higher battery runtime and lifespan due to evenly stressed cells.
- Optimized power delivery for consistent performance.
- Compatible with all devices of the PARKSIDE X 20 V Team series.
- Equipped with automatic charge indicator and LED on both battery and charger.
- Battery features rubber nubs for slip resistance.
Image: The Parkside 20V PAP 20 B1 battery and PLG 20 C1 charger.
Image: The Parkside 20V battery and charger shown separately.
Image: Diagram illustrating the wide compatibility of the Parkside X 20V Team Series battery with various tools.
Organizować coś
Before using your Parkside battery and charger, ensure all components are present and undamaged.
Początkowe ładowanie
- Connect the PLG 20 C1 charger to a suitable power outlet. The charger's LED indicator will illuminate, typically green, to show it is ready.
- Insert the PAP 20 B1 battery pack into the charger. Ensure it clicks securely into place.
- The charger's LED indicator will change, usually to red or flashing green, to indicate that charging is in progress.
- Allow the battery to charge fully. The LED indicator will typically turn solid green when charging is complete. A full charge takes approximately 60 minutes.
- Once fully charged, remove the battery from the charger. Disconnect the charger from the power outlet when not in use.
Image: The Parkside PAP 20 B1 battery correctly inserted into the PLG 20 C1 charger for charging.
Obraz: Zbliżenie view of the Parkside PLG 20 C1 charger, showing its indicator lights.
Operacyjny
The Parkside 20V battery is designed for easy integration with compatible X 20V Team Series tools.
Wkładanie baterii do narzędzia
- Przed włożeniem lub wyjęciem akumulatora należy upewnić się, że narzędzie jest wyłączone.
- Align the battery with the battery slot on your Parkside X 20V Team Series tool.
- Wsuń baterię do gniazda, aż zatrzaśnie się na swoim miejscu. Upewnij się, że jest dobrze osadzona i bezpieczna.
Sprawdzanie poziomu naładowania baterii
The PAP 20 B1 battery features a 3-stage charge indicator:
- Press the battery's charge indicator button.
- Three LEDs illuminated: Full charge.
- Two LEDs illuminated: Medium charge.
- One LED illuminated: Low charge, recharge soon.
- No LEDs illuminated: Battery is empty or faulty.
Image: A close-up of the Parkside PAP 20 B1 battery, highlighting its 3-stage charge indicator.
Obraz: Bok view of the Parkside PAP 20 B1 battery, showing its robust design.
Konserwacja
Proper maintenance ensures the longevity and performance of your Parkside battery and charger.
Czyszczenie
- Przed czyszczeniem należy zawsze odłączyć ładowarkę od zasilania.
- Use a dry, soft cloth to clean the battery and charger. Do not use any liquids or abrasive cleaning agents.
- Keep the ventilation openings on the charger clear of dust and debris.
Składowanie
- Store the battery and charger in a cool, dry place, away from direct sunlight and moisture.
- For long-term storage, it is recommended to charge the battery to approximately 50-70% capacity. Do not store fully discharged or fully charged for extended periods.
- Store the battery and charger out of reach of children.
Rozwiązywanie problemów
If you encounter issues with your Parkside battery or charger, refer to the following common solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Bateria się nie ładuje | Charger not plugged in; faulty power outlet; battery not properly inserted; faulty battery or charger. | Check power connection; try a different outlet; re-insert battery firmly; contact support if issue persists. |
| Charger LED not indicating charge | Battery fully charged; battery or charger too hot/cold; faulty charger. | Check battery charge level; allow battery/charger to reach room temperature; contact support. |
| Bateria nie zasila narzędzia | Battery discharged; battery not properly inserted; tool fault; incompatible battery. | Charge battery; re-insert battery firmly; check tool manual; ensure battery is Parkside X 20V Team Series compatible. |
| Battery overheating during charge/use | Overuse; faulty battery/charger; poor ventilation. | Stop use/charging immediately; allow to cool down in a well-ventilated area; contact support if issue recurs. |
Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | Parkside |
| Numer modelu | PAP 20 B1 / PLG 20 C1 |
| Typ baterii | Litowo-jonowy |
| Pojemność bateriitage | 20 wolty |
| Pojemność baterii | 2 Ah |
| Prąd wyjściowy ładowarki | 2 A |
| Czas ładowania | Około 60 minut |
| Kompatybilne urządzenia | All Parkside X 20 V Team Series devices |
| Typ złącza | PLG 20 |
| Liczba portów | 1 |
| Product Dimensions (P x W x H) | 10P x 15W x 10H centymetrów |
| Zgodność | Zgodny z CE |
Gwarancja i wsparcie
Informacje o gwarancji
This Parkside product is covered by a Legal Warranty. Please retain your proof of purchase for any warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized repairs, or normal wear and tear.
Obsługa klienta
For technical assistance, warranty claims, or to order replacement parts, please contact Parkside customer service. Refer to your product packaging or the official Parkside webwitryna zawierająca najbardziej aktualne dane kontaktowe w Twoim regionie.