WORKPRO W125235

Instrukcja obsługi bezprzewodowego pistoletu do klejenia na gorąco WORKPRO 3.6 V

Model: W125235

Wstęp

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Informacje dotyczące bezpieczeństwa

Always keep the glue gun away from children.
Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
Upewnij się, że miejsce pracy jest dobrze wentylowane.
Do not leave the hot glue gun unattended when it is powered on.
Unplug or power off the glue gun when not in use or before performing any maintenance.
Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Allow the equipment to cool down completely before packing it away.
This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Zawartość opakowania

Sprawdź zawartość paczki, aby upewnić się, że wszystkie przedmioty znajdują się w niej i nie są uszkodzone:

1 x WORKPRO 3.6V Cordless Hot Glue Gun
20 x Mini Glue Sticks (0.27" Dia)
1 x kabel ładujący typu C
1 x Instrukcja obsługi (ten dokument)

WORKPRO Cordless Hot Glue Gun and included accessories — Image: The WORKPRO Cordless Hot Glue Gun shown with its included accessories, including the Type-C charging cable and a bundle of 20 mini glue sticks.

Produkt ponadview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

Diagram of WORKPRO Cordless Hot Glue Gun with labeled parts — Image: A detailed diagram of the WORKPRO Cordless Hot Glue Gun, highlighting key components such as the nozzle, ON/OFF switch, glue stick entry, LED indicator, trigger lever, Type-C cable, retractable stand-up base, and Type-C charging port.

Dysza: Dispenses melted glue.
Przełącznik włącz / wyłącz: Włącza i wyłącza urządzenie.
Glue Stick Entry: Where glue sticks are inserted.
Wskaźnik LED: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
Dźwignia spustowa: Activates glue dispensing.
Port ładowania typu C: Do podłączenia kabla ładującego.
Retractable Stand-up Base: Provides stability when the gun is not in use.

Organizować coś

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

Locate the Type-C charging port on the glue gun.
Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
Podczas ładowania dioda LED będzie świecić na czerwono, a po pełnym naładowaniu zmieni kolor na zielony.

WORKPRO Cordless Hot Glue Gun charging via USB-C — Image: The WORKPRO Cordless Hot Glue Gun connected via its Type-C cable to a laptop for charging, demonstrating its USB rechargeable capability. The LED indicator shows the charging status.

Instrukcja obsługi

Follow these steps to operate your hot glue gun:

Włóż klej w sztyfcie: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
Włączanie: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
Ogrzewanie wstępne: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
Nałóż klej: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
Automatyczne wyłączanie: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

WORKPRO Cordless Hot Glue Gun heating up with red LED indicator — Image: The WORKPRO Cordless Hot Glue Gun with its red LED indicator illuminated, signifying that it is in the process of heating up. A timer on the image shows "90S" for the fast preheating time.

Four-step instruction guide for using the WORKPRO Cordless Hot Glue Gun — Image: A visual guide demonstrating the four main steps of using the glue gun: 1) Inserting the glue stick, 2) Pressing the ON/OFF switch, 3) Waiting for the LED to turn green after 90 seconds of preheating, and 4) Pulling the trigger to dispense glue.

Ważne uwagi:

Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Wyłącz urządzenie i poczekaj, aż całkowicie ostygnie, zanim je spakujesz.
The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Comparison of glue output from WORKPRO glue gun versus ordinary glue gun — Image: A side-by-side comparison illustrating the superior glue output and clarity of the WORKPRO glue gun (left) compared to an ordinary glue gun (right). The WORKPRO gun shows a consistent, clear glue flow at 0.14 oz/minute, while the ordinary gun shows a less controlled, drippy output at 0.07 oz/minute.

Konserwacja

Czyszczenie: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
Pielęgnacja dyszy: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
Składowanie: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
Pielęgnacja baterii: Aby zapewnić optymalną żywotność baterii, unikaj częstego całkowitego rozładowywania. Ładuj ją regularnie, nawet jeśli nie jest używana regularnie.

Rozwiązywanie problemów

Problem	Możliwa przyczyna	Rozwiązanie
Pistolet do klejenia nie nagrzewa się.	Bateria jest słaba lub rozładowana. Power switch not pressed correctly.	Charge the glue gun fully. Press and hold the ON/OFF switch for 3 seconds until the LED lights up.
No glue dispenses when trigger is pulled.	Glue gun not hot enough. Glue stick not fully inserted or jammed.	Wait for the LED indicator to turn green. Ensure glue stick is fully inserted. Do not force it.
Glue drips excessively from nozzle.	Normal during heating/cooling. Incorrect glue stick size.	Place the gun on its stand. Use only 0.27" diameter glue sticks.
Wskaźnik LED pozostaje czerwony.	Still heating up. Trwa ładowanie.	Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green).

Specyfikacje

Funkcja	Szczegół
Marka	WORKPRO
Numer modelu	W125235
Źródło zasilania	Zasilanie bateryjne (litowo-jonowe)
Tomtage	3.6 wolty
Cotage	9 watów
Pojemność baterii	2500mAh
Wejście ładowania	5 V 1 A (typ C)
Czas podgrzewania	Około. 90 sekund
Glue Output Speed	0.14 uncji/min
Średnica kompatybilnego kleju w sztyfcie	0.27 inches (Mini Sticks)
Automatyczne wyłączanie	8 minut bezczynności
Waga przedmiotu	1.1 funta
Wymiary opakowania	8.11 x 7.52 x 2.13 cala
Kraj pochodzenia	Chiny
Materiał zgodny	Wood, Ceramic, Metal, Stone

Gwarancja i wsparcie

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.