ChongXiao Universal BLDC Brushless Controller User Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of the ChongXiao Universal BLDC Brushless Controller. This controller is designed for electric bikes and e-scooters, supporting various voltage ranges (24V, 36V, 48V, 60V) and power outputs (250W, 350W) with current ratings from 10A to 20A. It features a brushless design for smooth, stable, and long-lasting performance.

Image 1.1: The ChongXiao Universal BLDC Brushless Controller. This image shows the golden aluminum casing of the controller with its product label indicating nominal voltage, maximum current, and motor phase angle.

2. Konfiguracja i instalacja

Proper installation is crucial for the safe and efficient operation of your electric bike or e-scooter. Please follow these steps carefully.

2.1 Funkcje kontrolera

The controller supports the following functions:

• Low-level brake
• Tempomat
• Brake light power output
• PAS (Pedal Assist System)
• Bieg wsteczny
• High-level brake
• Speed controller handle (throttle) input
• Phase meter connection
• Three-speed gear selection
• Hall meter connection
• Hall sensor (5 wires) connection
• Intelligent recognition (self-learning lines)
• Head/tail light power output
• Electric door lock input
• Phase line connection
• Wejście zasilania baterii

2.2 Kroki połączenia

Refer to the wiring diagrams below for visual guidance. Ensure all connections are secure and correct before applying power.

Image 2.1: The ChongXiao controller showing its multiple wire harnesses for various connections. Each harness is color-coded for identification.

Image 2.2: Detailed wiring diagram with numbered labels corresponding to the controller's functions. This diagram is essential for correct installation.

1. Connect the Motor Line: Connect the motor phase lines (usually three thick wires) from the controller to the motor, ensuring color-to-color matching.
2. Connect the Battery Line: Connect the battery power lines. The red wire is for battery positive (+), and the black wire is for battery negative (-).
3. Connect the Throttle Line: Connect the speed controller handle (throttle) line. If your throttle does not have an electric lock, the controller's two electric lock wires can be shorted together.
4. Connect the Hall Line: Connect the Hall sensor lines from the controller to the motor's Hall sensors, ensuring color-to-color matching.
5. Intelligent Recognition (Self-Learning):
   • Wyłącz zasilanie.
   • Connect the two intelligent recognition lines together.
   • Turn on the power. The wheel will either rotate forward or reverse.
   • If the wheel rotates forward, separate the intelligent recognition lines.
   • If the wheel rotates in reverse, separate the intelligent recognition lines, then connect them together again. The wheel should now rotate forward. Once it rotates forward, separate the two intelligent recognition lines.

   This process adjusts the controller's phase ratio and adapts it to the battery voltage. Notatka: When using throttle control for speed, the two intelligent recognition lines must be separated.

6. Connect Other Functions: Connect other functions such as low-level brake, cruise, brake light power, PAS, reverse gear, high-level brake, phase meter, three-speed gear, hall meter, head/tail light, and electric door lock as needed, referring to Image 2.2 for wire identification.

3. Instrukcja obsługi

Once the controller is correctly installed and configured, you can operate your electric bike or e-scooter using the connected accessories.

3.1 Podstawowa obsługa

• Włączanie/wyłączanie: Use the electric door lock (if connected) or the main power switch of your vehicle to turn the system on or off.
• Kontrola prędkości: Use the speed controller handle (throttle) to adjust the motor's speed.
• Hamowanie: Apply the brakes. The controller supports both low-level and high-level brake inputs, which will cut off motor power when activated.

3.2 zaawansowane funkcje

• Tempomat: If connected, activate the cruise function to maintain a constant speed without continuously holding the throttle.
• Three-Speed Gear: Select between different speed modes (e.g., low, medium, high) using the connected three-speed gear switch.
• System wspomagania pedałowania (PAS): If your vehicle has a PAS sensor and it's connected, the motor will provide assistance when you pedal.
• Bieg wsteczny: Activate the reverse function (if connected) for backward movement, typically at a reduced speed.
• Ślepia: If head/tail lights are connected to the controller's output, they can be controlled via the vehicle's light switch.

4. Konserwacja

To ensure the longevity and optimal performance of your ChongXiao BLDC Brushless Controller, follow these general maintenance guidelines:

• Utrzymywać w suchości: Protect the controller from water and excessive moisture. While the aluminum casing zapewnia pewną ochronę, nie jest jednak całkowicie wodoodporny.
• Regularnie czyść: Periodically clean the exterior of the controller with a dry, soft cloth to remove dust and dirt. Do not use harsh chemicals or abrasive materials.
• Sprawdź połączenia: Regularnie sprawdzaj wszystkie połączenia przewodów, aby upewnić się, że są solidne i nie mają korozji ani uszkodzeń. Luźne połączenia mogą prowadzić do przerw w działaniu lub awarii podzespołów.
• Unikaj przegrzania: Ensure the controller is mounted in a location with adequate airflow to prevent overheating, especially during prolonged use or high power demands.
• Zachowaj ostrożność: Avoid dropping or subjecting the controller to strong impacts, which can damage internal components.

5. Rozwiązywanie Problemów

This section provides solutions to common issues you might encounter with your controller.

5.1 Typowe problemy i rozwiązania

• Silnik nie pracuje:
  • Check battery connection: Ensure the battery is charged and correctly connected to the controller.
  • Check motor phase lines: Verify that the three thick motor wires are securely connected and matched by color.
  • Check Hall sensor lines: Ensure the Hall sensor wires (5 wires) are correctly connected.
  • Check throttle connection: Confirm the throttle is properly connected and functioning.
  • Perform intelligent recognition: If not done or if connections were changed, repeat the intelligent recognition process (Section 2.2, Step 5).
• Motor Runs in Reverse:
  • This indicates an incorrect phase match. Repeat the intelligent recognition process (Section 2.2, Step 5) to correct the motor's rotation direction.
• Przerywana moc/praca:
  • Inspect all wire connections for looseness or corrosion. Secure any loose connections.
  • Check for damaged wires or connectors. Replace if necessary.
• No Brake Function:
  • Verify the brake lever wires are correctly connected to the controller's low-level or high-level brake inputs.
  • Ensure the brake levers themselves are functioning correctly.

Jeśli napotkasz problemy, które nie zostały tutaj wymienione lub jeśli proponowane rozwiązania nie pomogą w rozwiązaniu problemu, skontaktuj się z obsługą klienta.

6. Specyfikacje

Below are the technical specifications for the ChongXiao BLDC Brushless Controller:

Image 6.1: Dimensions of the ChongXiao BLDC Brushless Controller, showing measurements of 95mm length, 56mm width, and 32mm height.

7. Gwarancja i wsparcie

7.1 Informacje o gwarancji

The manufacturer's specifications indicate that there is no explicit warranty provided for this product. Please review the product listing at the time of purchase for any updated warranty details from the seller.

7.2 Obsługa klienta

For technical assistance, installation queries, or troubleshooting beyond the scope of this manual, please contact the seller or manufacturer directly through the platform where the product was purchased. Provide your order details and a clear description of the issue to receive prompt support.