keepLiNK 6-Port 10/100Mbps PoE+ Switching Hub User Manual

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your keepLiNK 6-Port 10/100Mbps PoE+ Switching Hub. This device is designed to provide reliable network connectivity and Power over Ethernet (PoE) capabilities for compatible devices such as IP cameras and wireless access points.

Przed użyciem produktu należy dokładnie przeczytać tę instrukcję, aby mieć pewność, że zostanie on prawidłowo skonfigurowany i będzie działał z optymalną wydajnością.

2. Funkcje produktu

• 6x 10/100Mbps RJ45 Ports: Features 6 auto-negotiation RJ45 ports, including 4 PoE+ enabled ports.
• PoE+ Compliance: Supports IEEE 802.3af/at standards, providing up to 30W PoE power per port.
• Total PoE Power Budget: Offers a total PoE power capacity of 65W across all PoE ports. Note: Does not support 24V passive PoE.
• Wydajność sieci: Supports automatic MDI/MDI-X, IEEE802.3X full-duplex, and backpressure half-duplex traffic control for wire-speed forwarding.
• AI & Extend Switch:
  • AI PoE Mode: Automatically detects and processes port data or signal anomalies.
  • 250m Extend Function: Intelligent switching to 250m ultra-long distance mode for stable data transmission over extended cable lengths (at 10Mbps).
• Funkcje ochronne: Equipped with short-circuit, over-current, over-voltage, and 4KV lightning protection.
• Projekt: Features a durable metal casing, silent fanless operation, and an energy-saving design.
• Łatwość użytkowania: Plug-and-play functionality requires no complex configuration.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• keepLiNK 6-Port 10/100Mbps PoE+ Switching Hub
• Zasilacz
• Instrukcja obsługi (ten dokument)

4. Przewodnik konfiguracji

Follow these steps to set up your PoE+ Switching Hub:

1. Rozpakuj urządzenie: Ostrożnie wyjmij przełącznik z opakowania.
2. Podłącz zasilanie: Connect the provided power adapter to the switch's power input port and then to a standard electrical outlet. The power LED indicator should illuminate.
3. Połącz Uplink: Use an Ethernet cable to connect your router or main network to one of the Uplink ports (ports 5 or 6) on the switch.
4. Podłącz urządzenia PoE: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points) to the PoE+ ports (ports 1-4) using Ethernet cables. The switch will automatically detect and power these devices.
5. Podłączanie urządzeń bez PoE: Connect any non-PoE network devices (e.g., computers, NVRs) to the remaining ports (ports 1-6, depending on PoE usage) as needed.

5. Instrukcja obsługi

The switch features a dial switch on the front panel to select different operating modes:

• 1: Extend Mode (250m): When enabled, this mode extends the transmission distance of PoE ports 1-4 up to 250 meters at a speed of 10Mbps. This is useful for long-distance deployments of IP cameras or other PoE devices where standard 100m Ethernet limits are insufficient.
• 2: Standard Mode: This is the default operating mode. All ports (1-6) operate at their standard 10/100Mbps speeds, and PoE ports (1-4) provide power up to 100 meters.
• 3: Port Isolation Mode: In this mode, PoE+ ports 1-4 cannot communicate with each other, enhancing network security by isolating traffic between connected devices. However, all ports can still communicate with the Uplink ports (5-6).

To change the mode, use a small tool to adjust the dial switch to the desired setting (1, 2, or 3).

6. Konserwacja

To ensure the longevity and optimal performance of your keepLiNK PoE+ Switching Hub, follow these maintenance guidelines:

• Warunki środowiskowe: Operate the switch within the specified temperature range of -10°C to +50°C. Avoid extreme temperatures and humidity.
• Czyszczenie: Utrzymuj urządzenie w czystości i bez kurzu. Do czyszczenia używaj miękkiej, suchej ściereczki. Nie używaj środków czyszczących w płynie ani aerozolu.
• Wentylacja: Ensure proper airflow around the switch. Do not block the ventilation holes.
• Zarządzanie kablami: Organize network cables neatly to prevent strain on ports and accidental disconnections.
• Zasilanie: Use only the provided power adapter. Disconnect power during electrical storms or when not in use for extended periods.

7. Rozwiązywanie Problemów

If you encounter issues with your keepLiNK PoE+ Switching Hub, refer to the following common problems and solutions:

• Brak zasilania:
  • Upewnij się, że zasilacz jest solidnie podłączony do przełącznika i do sprawnego gniazdka elektrycznego.
  • Sprawdź, czy gniazdko elektryczne jest sprawne.
• Brak połączenia sieciowego:
  • Check all Ethernet cable connections between the switch, router, and connected devices. Ensure cables are not damaged.
  • Verify that the Uplink port is correctly connected to your main network.
  • Confirm that the connected devices are powered on and configured correctly.
• Urządzenie PoE nie otrzymuje zasilania:
  • Ensure the device connected is PoE-compatible (IEEE 802.3af/at standard). This switch does not support 24V passive PoE.
  • Check the total power consumption of all connected PoE devices to ensure it does not exceed the 65W total PoE budget.
  • Try connecting the PoE device to a different PoE+ port on the switch.
  • Verify the Ethernet cable is functioning correctly and supports PoE.
• Slow Network Speed in Extend Mode:
  • Extend Mode operates at 10Mbps. This is normal behavior for extended distances. If higher speeds are required, ensure cable length is within 100 meters and switch to Standard Mode.

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt for warranty claims.