DOREMiDi MTD-1024 MIDI to DMX Controller

1. Wprowadzenie

The DOREMiDi MTD-1024 is a versatile MIDI to DMX controller designed to bridge the gap between MIDI devices and DMX lighting equipment. It allows users to control DMX lighting fixtures using MIDI messages from instruments, software, or other MIDI controllers. This manual provides detailed instructions for setting up, operating, and maintaining your MTD-1024 controller.

Główne cechy:

• DMX Output Port: Connects to DMX IN ports via 3-Pin XLR cable.
• MIDI to DMX Conversion: Controls DMX lighting devices through MIDI instruments or software.
• USB MIDI Functionality: Connects to a computer to receive MIDI messages and supply power.
• Configurable Mapping: Allows for custom MIDI to DMX message configuration via a knob interface.
• Data Backup: Configuration data can be uploaded and saved for future use.

2. Zawartość opakowania

Po otwarciu pudełka sprawdź, czy znajdują się w nim wszystkie poniższe elementy:

• 1 x DOREMiDi MTD-1024 MIDI to DMX Controller
• Kabel zasilający 1 x USB
• 1 x Instrukcja obsługi (ten dokument)
• 1 x XLR Cable (for DMX connection)

Image: Contents of the DOREMiDi MTD-1024 package, including the controller, USB power cable, and user manual.

3. Koniec produktuview

Familiarize yourself with the various components and ports of the MTD-1024 controller.

Image: Labeled diagram of the MTD-1024 controller's top panel.

1. USB Device Power In: USB port for power supply and MIDI communication with a computer.
2. Wejście MIDI: 5-pin DIN MIDI input port for connecting MIDI devices.
3. DMX Out 1: 3-pin XLR DMX output port for controlling DMX devices (addresses 1-512).
4. DMX Out 2: 3-pin XLR DMX output port for controlling DMX devices (addresses 513-1024, starting as new address 1).
5. Wyświetlacz OLED: Shows current settings and MIDI/DMX data.
6. Pokrętło enkodera: Used for navigation and parameter adjustment within the menu.

Obraz: Góra view of the DOREMiDi MTD-1024 controller, showing the OLED display and encoder knob.

Obraz: Szczegółowy view of the two DMX OUT XLR ports on the controller.

Obraz: Szczegółowy view of the MIDI IN 5-pin DIN port and the USB Device Power In port.

4. Konfiguracja

4.1. Connecting to a Computer (USB MIDI)

The MTD-1024 can be powered and receive MIDI messages from a computer via its USB port.

1. Connect one end of the provided USB power cable to the 'USB DEVICE POWER IN' port on the MTD-1024.
2. Podłącz drugi koniec kabla USB do wolnego portu USB w komputerze.
3. The MTD-1024 will power on, and your computer should recognize it as a MIDI device.

Image: The MTD-1024 controller connected to a computer via a USB MIDI cable, illustrating power and MIDI data transfer.

4.2. Connecting a MIDI Device

To control DMX lights from a MIDI instrument or controller, connect it to the MTD-1024.

1. Connect a standard 5-pin DIN MIDI cable from the MIDI OUT port of your MIDI device (e.g., keyboard, MIDI interface) to the 'MIDI IN' port on the MTD-1024.

Image: The MTD-1024 controller with both USB and MIDI IN cables connected, ready for operation.

4.3. Connecting DMX Devices

The MTD-1024 features two DMX output ports to control your lighting fixtures.

1. Connect a 3-pin XLR cable from the 'DMX OUT 1' or 'DMX OUT 2' port on the MTD-1024 to the DMX IN port of your first DMX lighting device.
2. For multiple DMX devices, daisy-chain them by connecting an XLR cable from the DMX OUT of the first device to the DMX IN of the next, and so on. The MTD-1024 supports bridging multiple devices.

Image: A close-up of the DMX OUT ports on the MTD-1024, showing how XLR cables are connected to control DMX lighting fixtures.

Obraz: Byłyample setup showing the MTD-1024 connected to a laptop and two DMX lighting fixtures, demonstrating a typical control environment.

Obraz: Byłyample setup showing the MTD-1024 connected to a MIDI keyboard and two DMX lighting fixtures, illustrating control via a MIDI instrument.

5. Działanie

5.1. Configuring MIDI to DMX Messages

The MTD-1024 allows for detailed configuration of how incoming MIDI messages are translated into DMX commands. Use the encoder knob and OLED display to navigate and adjust settings.

Image: A close-up of the MTD-1024's OLED display and encoder knob, which are used for configuring MIDI to DMX mappings.

For a visual guide on configuring the device, please refer to the official instruction video below:

5.2. MIDI to DMX Demo

The MTD-1024 allows for real-time control of DMX lighting fixtures using MIDI input. This can be from a physical MIDI device like a keyboard or from MIDI software on a computer.

• Control via MIDI Device: Play notes or adjust controllers on your MIDI instrument, and the MTD-1024 will translate these into DMX commands to control your lights.
• Control via MIDI Software: Use a Digital Audio Workstation (DAW) like Logic Pro to send MIDI messages to the MTD-1024, enabling automated or programmed lighting sequences.

Refer to the video in Section 5.1 for a demonstration of MIDI to DMX control using both a MIDI device and MIDI software.

6. Konserwacja

To ensure the longevity and optimal performance of your DOREMiDi MTD-1024 controller, follow these maintenance guidelines:

• Czyszczenie: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or strong chemicals, as they may damage the finish or internal components.
• Składowanie: When not in use, store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Obsługiwanie: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal circuitry or external ports.
• Znajomości: Ensure all cables are connected securely but do not force them. Periodically check cable connections for wear and tear.

7. Rozwiązywanie Problemów

If you encounter issues with your MTD-1024 controller, please refer to the following common troubleshooting steps:

8. Specyfikacje

9. Gwarancja i wsparcie

DOREMiDi products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official DOREMiDi webZachowaj paragon jako dowód zakupu na wypadek reklamacji.