GreenYi AHD Monitor Camera System User Manual

1. Wprowadzenie

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi AHD Monitor Camera System. This system includes a 5-inch AHD TFT LCD monitor and a universal 720P camera, designed to enhance vehicle safety by providing clear visual assistance for rear, front, or side views. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informacje dotyczące bezpieczeństwa

Observe the following safety precautions to prevent damage to the product and ensure safe operation:

• Ensure all power connections are secure and correctly polarized to avoid electrical shorts.
• Disconnect the vehicle's battery before performing any wiring to prevent electrical hazards.
• Nie utrudniaj kierowcy view lub zakłócać działanie elementów sterujących pojazdu podczas instalacji.
• Avoid installing the monitor or camera in locations exposed to extreme temperatures or direct sunlight for prolonged periods.
• This system is an aid to driving and does not replace the driver's responsibility for safe operation and awareness of surroundings.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

Rysunek 3.1: Nadview wszystkich zawartych komponentów.

Monitor Package:

• 1 x 5-inch AHD 800x480 Car TFT LCD Monitor
• 1 x zasilacz do zapalniczki samochodowej
• 1 x Dashboard Mounting Bracket
• 1 x Windshield Suction Cup Mounting Bracket
• 1 x 5FT Power Cable (for monitor)
• 1 x User Manual (for monitor)
• 1 x RCA Video Coupler

Camera Package:

• 1 x HD 720P Backup Camera
• 1 x 26FT Double Shielded Video Cable
• 1 x 5FT Power Cable (for camera)
• 1 x Metal Holder set
• 1 x Accessory Bag for Metal Holder
• 1 x Silicone Holder
• 1 x Accessory Bag for Silicone Holder
• 1 x User Manual (for camera)
• 1 x Taśma klejąca
• 1 x narzędzie do usuwania
• Opaski 5 x Zip
• 5 x Wire Clamps
• Wkrętak 1 x
• 1 x RCA Male to Male Coupler
• 1 x RCA Female to Female Coupler
• 1 x Electric Adhesive Tape
• 2 x T-tap Sets

4. Specyfikacje produktu

Specyfikacje monitora:

Specyfikacja aparatu:

5. Konfiguracja i instalacja

5.1 Instalacja monitora

The monitor can be installed using either the dashboard mounting bracket or the windshield suction cup mounting bracket.

1. Wybierz lokacje: Wybierz miejsce na desce rozdzielczej lub przedniej szybie, które nie będzie Ci przeszkadzać. view lub zakłócać sterowanie pojazdem.
2. Zamocuj wspornik:
   • For dashboard mount: Secure the dashboard bracket to the desired surface using the adhesive pad or screws (not included).
   • For suction cup mount: Press the suction cup firmly against a clean, smooth windshield surface and engage the locking lever.
3. Monitor montażowy: Attach the monitor to the chosen bracket. Adjust the angle for optimal viewing.
4. Podłączenie zasilania: Connect the monitor's power cable to the cigarette lighter adapter or directly to a 12-30V DC power source in your vehicle.

Rysunek 5.1: Monitor and camera components.

5.2 Instalacja kamery

The camera offers versatile installation options for front, rear, or side views. Use the provided metal or silicone holders.

Rysunek 5.2: Examples of camera installation positions.

1. Select Mounting Position: Choose a suitable location (e.g., license plate area for rear view, grille for front view, under side mirror for side view).
2. Zamocuj uchwyt: Secure the metal or silicone holder to the chosen surface using screws or adhesive tape.
3. Zamontuj kamerę: Insert the camera into the holder.
4. Dostosuj kąt: Use the mini screwdriver to adjust the camera's lens angle (360-degree rotatable body) for the desired viewperspektywa.
   

   Rysunek 5.3: Camera angle adjustment.

5.3 Schemat okablowania

Follow the wiring diagram carefully to connect the camera to the monitor and vehicle power supply.

Rysunek 5.4: Wiring connections for the camera system.

• Connect the 4-pin camera cable to the provided 26FT Double Shielded Video Cable.
• Connect the video cable's RCA end to the monitor's video input. The yellow plug is typically for the rear view kamera.
• Connect the camera's 5FT power cable:
  • Czerwony przewód: Connect to a 12-24V DC power source (e.g., reversing light positive, brake light positive, turning light positive, or ACC).
  • Czarny przewód: Connect to vehicle ground (GND).
• If connecting to a head unit with a trigger wire, connect the trigger wire (usually labeled "Reverse" or "Back") from the head unit to the reversing light positive.
• Ensure all connections are secure and insulated using the provided electrical adhesive tape and zip ties.

Notatka: All 4-pin cameras require the use of the provided power cable for connection to any monitor.

6. Działanie

6.1 Obsługa monitora

The monitor will automatically power on and display the camera feed when the connected power source (e.g., reverse gear) is activated.

Rysunek 6.1: Monitor tylny view with menu controls.

Use the buttons on the back of the monitor to access and adjust settings:

• Przycisk menu: Press to enter the menu and navigate through options.
• Przyciski w górę/w dół: Use to adjust values or select menu items.
• Available Settings: Brightness, Contrast, Saturation, Tint, Language, Mode, Reset.

6.2 Funkcje aparatu

The camera offers customizable features via switcher cables:

Rysunek 6.2: Camera feature switcher cables.

• Biały kabel: Cut this cable to switch between mirror (rear view, default) and non-mirror (front view) image display.
• Pomarańczowy kabel: Cut this cable to switch between CVBS and AHD video signal output. Ensure this matches your monitor's input capability.
• Zielony kabel: Cut this cable to toggle parking guidelines ON or OFF.

Notatka: Perform these cable modifications before final installation and power connection.

Rysunek 6.3: Camera fisheye lens with 170-degree viewkąt.

The camera features a 170-degree wide viewing angle fisheye lens, designed to cover a broad area and minimize blind spots.

7. Konserwacja

• Czyszczenie: Użyj miękkiego, damp cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
• Kontrola kabla: Periodically check all cables and connections for wear, damage, or loose contacts.
• Przejrzystość obiektywu: Ensure the camera lens remains free of dirt, mud, snow, or ice to maintain clear image quality.
• Bezpieczeństwo montażu: Verify that the monitor and camera mounts are secure and have not loosened over time due to vehicle vibrations.

8. Rozwiązywanie Problemów

9. Gwarancja i pomoc techniczna

For warranty information and technical support, please refer to the specific warranty card included in your product package or contact GreenYi customer service directly. Keep your purchase receipt as proof of purchase.

Informacje kontaktowe: Please visit the official GreenYi webAby uzyskać pomoc, odwiedź witrynę lub zapoznaj się z danymi kontaktowymi znajdującymi się na opakowaniu produktu.