MoesGo 2nd Generation WiFi Smart Light Switch (4 Gang)

Wstęp

The MoesGo 2nd Generation WiFi Smart Light Switch provides intelligent control over your home lighting. This 4-gang smart switch integrates with your 2.4GHz WiFi network, allowing for remote control via the MOES or Smart Life app, and voice control through Amazon Alexa and Google Home. It features a unique Star Ring halo for soft illumination in the dark and is constructed from premium PC+ABS fireproof material for durability. This manual provides detailed instructions for installation, setup, and operation.

Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: RYZYKO PORAŻENIA PRĄDEM ELEKTRYCZNYM. Electricity can cause personal injury and property damage. If handled improperly, you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician. Ensure all work meets applicable local and national codes.

• NEUTRAL WIRE IS REQUIRED do instalacji.
• This switch supports a 100-245V input and a maximum load of 10A.
• Kompatybilny tylko z Sieci WiFi 2.4GHz (not 5GHz).
• Do not use with smart light bulbs.
• Do not use as a dimmer switch.
• Always turn off the power circuit at the circuit breaker before performing any installation or maintenance.

Co jest w pudełku

Your MoesGo 4-Gang WiFi Smart Light Switch package includes:

• MoesGo 4-Gang Smart Light Switch (Model: XH-US4-MG)
• Płyta ścienna
• Drut nakrętki
• Śruby montażowe
• Instrukcja obsługi

Specyfikacje

Instalacja

Ważny: A neutral wire is required for this smart switch. If you are unsure about electrical wiring, consult a qualified electrician.

Krok 1: Wyłącz zasilanie

Locate your circuit breaker panel and turn off the power to the switch you are replacing. Verify power is off using an electrical tester.

Krok 2: Wyjmij stary przełącznik

Carefully remove the faceplate from the old switch. Use an electrical tester to confirm no voltage in the circuit. Loosen the screw terminals and remove the old switch from the wall box. Take a photo of the existing wiring for reference before disconnecting any wires.

Step 3: Wire the New Smart Switch (Single Pole Installation)

Connect the wires from your wall box to the new smart switch using the provided wire nuts. Ensure each connection is secure.

• Połącz Linia/Obciążenie wire (usually black) to the 'Line/Load' terminal on the smart switch.
• Połącz Neutralny wire (usually white) to the 'Neutral' terminal on the smart switch.
• Połącz Grunt wire (usually bare copper or green) to the 'Ground' terminal on the smart switch.
• For single pole setups, cap off any unused 'L2' terminals on the smart switch.

Step 4: Wire the New Smart Switch (3-Way Installation)

For 3-way control, use the 'Multi-Control Association' feature in the MOES App to link multiple switches wirelessly. This eliminates the need for complex traveler wires in a traditional setup. Refer to the app setup section for details on multi-control association.

Step 5: Secure the Switch and Faceplate

Carefully push the wired smart switch into the wall box. Secure it with the provided screws. Attach the new faceplate.

Krok 6: Przywróć zasilanie

Return to your circuit breaker panel and turn the power back on.

App Setup & Voice Control Integration

The MoesGo Smart Light Switch is compatible with the MOES App and Smart Life App. Ensure your phone is connected to a 2.4GHz WiFi network.

Step 1: Download and Register

Download the MOES App or Smart Life App from your app store. Register or log in to your account.

Krok 2: Wejdź w tryb parowania

Press and hold the switch button for approximately 6 seconds until the white indicator light flashes rapidly. This indicates the switch is in pairing mode.

Krok 3: Dodaj urządzenie w aplikacji

Open the MOES/Smart Life App. Click on 'Add Device' or the '+' icon. The app should automatically discover the smart switch. If not, select 'Lighting' then 'Switch (Wi-Fi)' and follow the on-screen prompts.

Krok 4: Połącz się z siecią Wi-Fi

Select your 2.4GHz WiFi network and enter the password. The app will connect the switch to your network. Once connected, you can rename the switch for easier identification.

Step 5: Integrate with Alexa/Google Home

Aby włączyć sterowanie głosowe:

• Dla Alexy: Open the Amazon Alexa app. Go to 'Skills & Games', search for 'Smart Life' (or 'MOES'), and enable the skill. Link your Smart Life/MOES account with your Amazon account. Discover devices.
• W przypadku Google Home: Open the Google Home app. Tap the '+' icon, then 'Set up device', then 'Works with Google'. Szukaj 'Smart Life' (or 'MOES') and link your account.

Instrukcja obsługi

Sterowanie ręczne

Press the physical button on the smart switch to manually turn the connected lights on or off.

App Control (MOES/Smart Life App)

Po połączeniu z aplikacją możesz:

• Zdalne włączanie/wyłączanie: Control lights from anywhere.
• Harmonogram: Set specific times for lights to turn on or off (e.g., for kids' bedtime).
• Odliczanie czasu: Set a timer for lights to automatically turn off after a set duration.
• Losowy harmonogram: Simulate an occupied home for enhanced security by randomizing light activity.
• Inching: Automatically turn off devices after a set time.
• Stan włączenia: Choose the default state (on, off, or last state memory) after a power outage.
• Kontrola grupy: Control multiple smart switches simultaneously.
• Powiązanie scen: Create custom scenes to activate multiple devices with a single command.
• Kontrola udziału: Udostępnij kontrolę nad urządzeniem członkom rodziny.

Sterowanie głosowe

Use voice commands with your Amazon Alexa or Google Home device to control your lights. Examples:

• "Alexa, turn on/off [switch name]."
• "Google, turn on/off [switch name]."

Wireless Multi-Control (3-Way/4-Way)

Utilize the "Multi-Control Association" feature in the MOES App to link multiple switches wirelessly. This allows for 3-way or 4-way control of lights without traditional traveler wires, ideal for hallways and large rooms.

Konserwacja

To maintain optimal performance and appearance of your MoesGo Smart Light Switch:

• Clean the surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Upewnij się, że przełącznik nie będzie narażony na nadmierną wilgoć lub bezpośrednią spryskiwanie wodą.
• Periodically check for firmware updates in the MOES/Smart Life app to ensure the latest features and security patches.

Rozwiązywanie problemów (FAQ)

• If you cannot add your Smart Device:
  1. Ensure the Smart Device is powered on.
  2. Verify your phone is connected to a 2.4GHz Wi-Fi network (not 5GHz).
  3. Check your router settings. If it's dual-band, ensure 2.4GHz Wi-Fi is enabled and connect your phone to it.
  4. Confirm your Wi-Fi router's security setting is WPA2-PSK and authorization type is AES, or set both as auto. Wireless mode cannot be 11n only.
  5. Use English and numbers to name your Wi-Fi router. Otherwise, Smart Life may not recognize it.
  6. Maintain a strong Wi-Fi connection by keeping the smart device close to the router during setup.
  7. If the maximum number of router connections has been reached, turn off some connected devices and try again.
• Switch unresponsive or offline: Check power at the circuit breaker. Ensure Wi-Fi signal strength is adequate. Try restarting the switch by turning off and on the power at the breaker.
• Sterowanie głosowe nie działa: Verify the Smart Life/MOES skill is enabled and linked in your Alexa/Google Home app. Ensure the device name is recognized by your voice assistant.

Gwarancja i wsparcie

MoesGo provides a 1-letnia gwarancja for this product. During the free warranty period, if the product breaks down during normal use, we offer free maintenance. This warranty does not cover natural disasters, man-made equipment failures, disassembly, or repair without permission.

For any questions or support, please contact the dedicated customer support team. Refer to the official webwitryna z najnowszymi aktualizacjami i informacjami kontaktowymi.

Producent: WENZHOU NOVA NEW ENERGY CO., LTD

E-mail: serwis@moeshouse.com