ŚWIETLAKARSTWO 21044

LIGHTAILING LED Lighting Kit for Lego 21044 Architecture Paris Model

Model: 21044 | Marka: LOTNICTWO

Wstęp

This instruction manual provides guidance for the installation, operation, and care of your LIGHTAILING LED lighting kit, designed specifically for the Lego 21044 Architecture Paris model. This kit enhances your building block model by adding illumination. Please note that the Lego model set itself is not included with this lighting kit.

The package includes 1 USB light kit, a battery box, and a detailed instruction guide. All components are made from safe materials.

Środki ostrożności

  • Ensure the power source is less than 5V. Use AA batteries or a compatible USB charger.
  • Handle LED lights and wires with care. Avoid hard pulling, bending, or shaking to prevent damage.
  • Aby uniknąć ryzyka zadławienia, trzymaj małe części poza zasięgiem małych dzieci.
  • Produkt zalecany jest dla dzieci w wieku od 6 lat.

Konfiguracja i instalacja

Follow these steps to install your LIGHTAILING LED lighting kit into your Lego 21044 Architecture Paris model. A detailed paper manual is included in the package for step-by-step guidance. Installation videos for some products are also available on the manufacturer's website, and PDF instructions can be provided upon request for more specific details.

  1. Przygotuj swój model: Ensure your Lego 21044 Architecture Paris model is fully assembled according to its original instructions before beginning the light kit installation.
  2. Rozpakuj komponenty: Carefully remove all LED lights, wires, and the battery box from the packaging.
  3. Zapoznaj się z instrukcją: Refer to the included paper instruction manual for specific placement of each LED light and routing of wires within your Lego model. The manual will guide you on which Lego bricks to temporarily remove or adjust for wire placement.
  4. Podłącz światła: Connect the LED lights to the main wiring harness as indicated in the instructions. Ensure connections are secure but do not force them.
  5. Przewody trasowe: Carefully route the thin wires between Lego bricks and plates. The design allows for wires to be hidden within the model's structure. Avoid pinching or sharply bending wires.
  6. Montaż skrzynki akumulatorowej: Insert AA batteries (not included) into the battery box. Connect the main wiring harness to the battery box or the USB power connector.
  7. Kontrolki testowe: Before fully reassembling your model, briefly turn on the lights to ensure all connections are working correctly.
  8. Montaż końcowy: Carefully reassemble any Lego bricks that were removed during the installation process, ensuring wires are not damaged.

Notatka: The Lego set is not included. The lighting kit is designed to be integrated into an existing Lego 21044 Architecture Paris model.

Instrukcja obsługi

To operate your LIGHTAILING LED lighting kit:

  • Włączanie: If using the battery box, slide the switch to the "ON" position. If using a USB power source, connect the USB cable to a compatible 5V USB port (e.g., a wall adapter, power bank, or computer).
  • Wyłączone: To turn off the lights, slide the switch on the battery box to the "OFF" position or disconnect the USB power source.

The lights will illuminate your Lego 21044 Architecture Paris model, enhancing its display.

Konserwacja

Proper maintenance ensures the longevity of your lighting kit:

  • Czyszczenie: Use a soft, dry cloth to gently wipe dust from the LED lights and wires. Avoid using liquids or abrasive cleaners.
  • Wymiana baterii: If the lights dim or stop working when using the battery box, replace the AA batteries with new ones. Ensure correct polarity.
  • Składowanie: If storing the model for an extended period, remove batteries from the battery box to prevent leakage.
  • Obsługiwanie: Always handle the illuminated model with care to avoid stressing the wires or dislodging the lights.

Rozwiązywanie problemów

If your lighting kit is not functioning as expected, consider the following:

ProblemMożliwa przyczynaRozwiązanie
Światła nie włączają się.
  • Wyłącznik zasilania jest wyłączony.
  • Baterie są rozładowane lub nieprawidłowo włożone.
  • USB power source is not connected or faulty.
  • Loose connection in the wiring harness.
  • Uszkodzony przewód lub dioda LED.
  • Ensure the power switch is "ON".
  • Wymień baterie lub sprawdź biegunowość.
  • Verify USB connection and try a different USB port/adapter.
  • Sprawdź szczelność wszystkich połączeń przewodów.
  • Inspect wires for visible damage. If a single LED is out, it might be faulty.
Światła są przyćmione.
  • Niski poziom naładowania baterii.
  • Insufficient power from USB source.
  • Wymień baterie.
  • Ensure USB power source provides adequate power (5V).
Niektóre światła nie działają.
  • Loose connection to specific LED.
  • Damaged individual LED or wire segment.
  • Check connections for the non-working lights.
  • Contact customer support if a specific component appears faulty.

Jeśli wykonanie powyższych czynności nie pomoże, skontaktuj się z działem obsługi klienta, aby uzyskać dalszą pomoc.

Specyfikacje

  • Wymiary produktu: 6.5 x 4.72 x 1.57 cala
  • Waga przedmiotu: 6 uncji
  • Numer modelu: 21044
  • Źródło zasilania: USB (less than 5V) or AA Batteries (not included)
  • Zalecany wiek producenta: 6 lata i więcej
  • Zgodność: Designed for Lego 21044 Architecture Paris model

Gwarancja i wsparcie

LIGHTAILING is committed to providing excellent customer service. This product comes with a dwuletnia bezpłatna gwarancja.

If you encounter any questions or issues during use, please do not hesitate to contact us via email. We aim to respond to your inquiries as quickly as possible to provide assistance.

For support, please refer to the contact information provided in your product packaging or on the official LIGHTAILING webstrona.

Zdjęcia produktu

LIGHTAILING LED lighting kit installed on a Lego Architecture Paris model, showing the Eiffel Tower and other landmarks illuminated against a dark background.
The Lego Architecture Paris model (21044) illuminated by the LIGHTAILING LED lighting kit, showcasing the Eiffel Tower and surrounding buildings with bright lights.
LIGHTAILING LED lighting kit installed on a Lego Architecture Paris model, showing the Eiffel Tower and other landmarks illuminated against a dark background.
Zbliżenie view of the illuminated Lego Architecture Paris model, highlighting the detailed lighting on the Eiffel Tower and other structures.
LIGHTAILING LED lighting kit installed on a Lego Architecture Paris model, showing the Eiffel Tower and other landmarks illuminated against a dark background.
The Lego Architecture Paris model with the LIGHTAILING LED kit, displayed in a room setting, showing the ambient effect of the lights.
LIGHTAILING LED lighting kit installed on a Lego Architecture Paris model, showing the Eiffel Tower and other landmarks illuminated against a dark background.
Another perspective of the illuminated Lego Architecture Paris model, emphasizing the various light points across the cityscape.
Close-up of the base of the Lego Architecture Paris model with LIGHTAILING LED lights, showing colorful illumination on the buildings.
A detailed shot of the base of the Lego Paris model, showing the intricate placement of colored LED lights on the smaller architectural elements.
Close-up of the top of the Eiffel Tower on the Lego Architecture Paris model with LIGHTAILING LED lights, showing a blue and red flag and internal illumination.
A close-up of the top section of the Eiffel Tower, featuring the French flag and internal LED illumination, adding detail to the model's peak.

Dodatkowe zasoby

Aby uzyskać dalszą pomoc lub view installation videos, please visit the official LIGHTAILING website or scan the QR code found on your product packaging.

Image showing a QR code for online installation videos and product safety standards including RoHS, CE, and Children's Product Certification.
Scan this QR code for online installation videos and to view product safety certifications.