Ważne informacje dotyczące bezpieczeństwa
Przed użyciem urządzenia prosimy o dokładne zapoznanie się z instrukcją. Zachowaj instrukcję do wykorzystania w przyszłości.
- Ensure the ice maker is placed on a stable, level surface away from direct sunlight or heat sources.
- Nie zanurzaj urządzenia, przewodu zasilającego ani wtyczki w wodzie ani innych płynach.
- Należy nadzorować dzieci podczas korzystania z urządzenia.
- Do zbiornika na wodę należy wlewać wyłącznie wodę pitną.
- Odłącz kostkarkę do lodu od zasilania przed czyszczeniem lub gdy nie jest używana.
Produkt ponadview
The FOHERE Nugget Ice Maker Machine is designed to produce chewable nugget ice quickly and efficiently. It features a compact design, low noise operation, and a convenient self-cleaning function.
Główne cechy:
- High Ice Output: Produces up to 38 lbs of nugget ice in 24 hours.
- Szybkie wytwarzanie lodu: First batch of ice in approximately 5-10 minutes.
- Żuwalne bryłki lodu: Soft, chewable ice that is gentle on teeth and enhances beverage flavor.
- Upgraded Cooling System: Features a fast and efficient compressor, low noise fan, and high-density insulation for energy efficiency.
- Funkcja samoczyszczenia: Easy one-click self-cleaning for hassle-free maintenance.
- Kompaktowa konstrukcja: Space-saving countertop design suitable for various occasions.
- Praca o niskim poziomie hałasu: Operates at approximately 45dB, minimizing disturbance.
Zdjęcia produktu:







Konfiguracja i pierwsze użycie
Rozpakowywanie i umieszczanie:
- Ostrożnie wyjmij kostkarkę do lodu z opakowania.
- Place the unit on a stable, level surface. Ensure there is at least 6 inches of clearance around the unit for proper ventilation.
- Wytrzyj zewnętrzną część miękką,amp płótno.
Czyszczenie wstępne:
- Przed pierwszym użyciem należy wyczyścić wnętrze kostkarki do lodu.
- Napełnij zbiornik na wodę czystą wodą do linii MAX.
- Press and hold the 'Clean' button for 3 seconds to activate the self-cleaning cycle.
- Once the cycle is complete, drain the water using the drain plug located at the back of the unit.
- Repeat the cleaning process with fresh water if desired.
Konfiguracja wideo:
Instrukcja obsługi
Robienie lodu:
- Sprawdź, czy korek spustowy jest szczelnie zamknięty.
- Open the top lid and fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
- Close the lid and plug the power cord into a grounded electrical outlet.
- Press the 'On/Off' button to start the ice making process. The snowflake indicator will light up.
- The first batch of ice will be ready in approximately 5-10 minutes. Subsequent batches will be faster.
- When the 'Ice Full' indicator lights up, the ice basket is full. The machine will pause ice production until some ice is removed.
- When the 'Add Water' indicator lights up, the water reservoir is low. Add more water to continue ice production.
Filmy instruktażowe:
Konserwacja
Funkcja samooczyszczania:
The ice maker features a convenient self-cleaning function to maintain hygiene and performance.
- Ensure the ice basket is empty.
- Fill the water reservoir with clean water and a small amount of mild detergent (e.g., vinegar or citric acid solution).
- Press and hold the 'Clean' button for approximately 3 seconds to start the self-cleaning cycle.
- The cleaning cycle will run for several minutes. Once complete, drain the cleaning solution from the unit.
- Rinse the reservoir thoroughly with fresh water and run another self-cleaning cycle with only clean water to remove any detergent residue. Drain again.
Spuszczanie wody:
Aby spuścić wodę z urządzenia:
- Locate the drain plug at the back of the ice maker.
- Place a container under the drain plug.
- Wyjmij korek spustowy, aby umożliwić wypłynięcie wody.
- Once all water has drained, securely close the drain plug.
Regularne czyszczenie:
- Przetrzyj zewnętrzną część kostkarki do lodu miękką ściereczką.amp szmatką regularnie.
- Clean the ice basket and scoop with warm, soapy water. Rinse thoroughly and dry before returning to the unit.
- For optimal performance, perform the self-cleaning cycle at least once a week or as needed based on usage.
Maintenance Image:

Rozwiązywanie problemów
If you encounter any issues with your FOHERE Nugget Ice Maker Machine, please refer to the following common problems and solutions:
- 'Add Water' Indicator On: The water reservoir is low. Refill with potable water up to the MAX line.
- 'Ice Full' Indicator On: The ice basket is full. Remove some ice to resume production. Ensure the ice sensor is not obstructed.
- Ice Not Forming:
- Sprawdź czy zbiornik na wodę jest napełniony.
- Sprawdź, czy urządzenie jest podłączone do sieci i włączone.
- Verify that the ambient temperature is within the recommended operating range (typically 50°F-90°F).
- Clean the unit as per maintenance instructions to prevent mineral buildup.
- Nietypowy hałas: This may be normal during the ice making cycle as ice drops into the basket or water circulates. If the noise is excessive or persistent, contact customer support.
- Wyciek wody: Ensure the drain plug is securely closed. Check for any cracks or damage to the water reservoir or hoses.
Jeśli po wypróbowaniu tych rozwiązań problem nadal występuje, skontaktuj się z obsługą klienta FOHERE, aby uzyskać pomoc.
Specyfikacje
| Specyfikacja | Szczegół |
|---|---|
| Marka | FOTU |
| Nazwa modelu | blat |
| Pojemność | 38 Pounds (per 24H) |
| Chłodziwo | R600a |
| Producent | FOTU |
| UPC | 735940861632 |
| ASIN | B0B7B44KCC |
| Typ materiału | Stal nierdzewna |
Gwarancja i wsparcie
FOHERE products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, product support, or to inquire about replacement parts, please refer to the warranty card included with your purchase or visit the official FOHERE webstrona.
Możesz również odwiedzić FOHERE Store on Amazon Aby uzyskać więcej informacji i poznać możliwości kontaktu.