Dzbanek filtrujący wodę Brita Large 10-Cup z wskaźnikiem SmartLight (model OB46/OB03) Instrukcja obsługi

1. Wprowadzenie

This manual provides essential information for the proper setup, operation, and maintenance of your Brita Large 10-Cup Water Filter Pitcher. Designed to provide cleaner, great-tasting tap water, this pitcher features a SmartLight indicator for convenient filter tracking and is made without BPA.

Image 1.1: Brita Large 10-Cup Water Filter Pitcher with included filter and packaging.

2. Konfiguracja

1. Rozpakuj komponenty: Remove all parts from the packaging: pitcher, lid, and filter.
2. Dzbanek do mycia naczyń: Hand-wash the pitcher and lid with mild detergent and rinse thoroughly. Do not wash the filter in a dishwasher.
3. Przygotuj filtr: Submerge the new Brita Standard filter in cold water for 15 seconds to remove loose carbon particles and air bubbles.
4. Wstaw filtr: Align the groove on the filter with the ridge in the pitcher's reservoir. Press the filter firmly into the reservoir until it clicks into place.
5. Filtracja początkowa: Fill the reservoir with cold tap water. Discard the first two pitchers of filtered water or use them for plants. This primes the filter.

Image 2.1: Proper insertion of the Brita Standard filter into the pitcher's reservoir.

3. Instrukcja obsługi

1. Napełnianie dzbanka: Open the easy-fill lid. Place the pitcher under a cold water tap and fill the reservoir. The water will filter through to the main pitcher compartment.
2. Proces filtrowania: Allow the water to pass through the filter completely before pouring. This ensures optimal filtration.
3. Nalewanie wody: Once filtered, simply tilt the pitcher to pour clean water from the spout.

Image 3.1: Demonstrating how to pour filtered water from the pitcher.

4. Konserwacja

4.1 Czyszczenie

Regular cleaning of your Brita pitcher is recommended. Hand-wash all parts (except the filter) with mild soap and water. Rinse thoroughly. The pitcher is not dishwasher safe.

4.2 Wymiana filtra

For best results, replace your Brita Standard water filter every 40 gallons or approximately every 2 months. The SmartLight indicator on the lid will help you track filter life.

Image 4.1: A Brita Standard water filter, ready for replacement.

5. SmartLight Indicator

The Brita SmartLight indicator on the lid provides a visual cue for when to change your filter:

• Zielone światło: Filter is in good condition.
• Żółte światło: Filter needs to be changed soon. Prepare a new filter.
• Czerwone światło: Filter needs to be changed. Replace the filter immediately for optimal performance.

To reset the SmartLight indicator after replacing the filter, press and hold the reset button on the lid for 5 seconds until the green light flashes.

Image 5.1: The SmartLight indicator on the Brita pitcher lid.

6. Rozwiązywanie Problemów

• Powolna filtracja: Ensure the filter is properly seated. If the issue persists, the filter may be clogged and require replacement.
• Smak/zapach wody: If the filtered water still has an undesirable taste or odor, ensure the filter was properly primed (discarding the first two pitchers). If the problem continues, replace the filter.
• SmartLight Indicator Not Working: Check if the battery is depleted. Some models have replaceable batteries. If not, contact customer support.
• Wyciek wody: Verify that all components, especially the filter and lid, are correctly assembled and securely in place.

7. Specyfikacje

Image 7.1: Visual representation of the pitcher's dimensions.

8. Gwarancja i wsparcie

For warranty information and customer support, please refer to the official Brita webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.

Producent: Brytyjczyk

Pierwsza dostępna: 21 lipca 2022 r.