Sanpyl 3G/4G LTE Base Hat Module Instruction Manual

1. Koniec produktuview

The Sanpyl 3G/4G LTE Base Hat Module is designed to provide 3G/4G LTE connectivity to various single board computers. It features a Mini PCI-E socket for compatible cellular modules and a Nano SIM card slot. This module can also operate independently via a Micro USB connection.

Główne cechy:

• Compatible with 40-pin GPIO header boards such as Raspberry Pi 4, 3, 2, B+.
• Efficient power circuit supporting up to 3 Amps.
• Wide operating temperature range: -40℃ to 80℃.
• Clip-in Mini PCI-E socket for various LTE, UMTS/HSPA+, and GSM/GPRS/ modules.
• Accessible Nano SIM card socket.
• Can be used standalone with a PC/Laptop via Micro USB.

2. Zawartość opakowania

Sprawdź, czy wszystkie wymienione poniżej elementy znajdują się w Twojej paczce. Jeśli brakuje któregokolwiek z nich lub jest on uszkodzony, skontaktuj się z obsługą klienta.

• 1 x 3G/4G LTE Base Hat Module
• 1 x USB 2.0 to Micro USB Cable
• 1 x śrubokręt
• 1 x Accessories Package (screws, standoffs)
• 1 x Instrukcja obsługi (ten dokument)

Rysunek 2.1: Zawartość opakowania

3. Specyfikacje produktu

4. Zgodność

Compatible Host Boards:

• Raspberry Pi 4
• Raspberry Pi 3
• Raspberry Pi 2
• Raspberry Pi B+
• Płyta główna Asus Tinker
• Skała 64
• Samsung ARTIK's Board
• Latte Panda

Compatible Mini PCI-E Modules:

• For Quectel: EC25/EC21/EC20/UC20/LTE-EP06 Series
• For Sierra Wireless: AirPrime MC Series
• For Telit: LM960, LE910V2, HE910, LE910Cx Series
• For Huawei: ME909s-120, ME909s-821 Series
• For Simcom: SIM7100, SIM7230 Series
• For ZTE: ZM8620 Series
• For U-Blox: MPCI-L2 Series
• For Thales: PLS62W, mPLS8, mPLAS9 Series

Figure 4.1: Compatible Single Board Computers

5. Product Layout and Dimensions

Familiarize yourself with the various components and their locations on the module.

Figure 5.1: Module Component Layout

The module's physical dimensions are provided for integration planning.

Rysunek 5.2: Wymiary produktu

6. Instrukcje konfiguracji

Follow these steps to set up your 3G/4G LTE Base Hat Module.

1. Attach the HAT to your Host Board: Carefully align the 40-pin GPIO header of the Base Hat Module with the corresponding pins on your compatible single board computer (e.g., Raspberry Pi). Press down gently until it is securely seated.
2. Install Mini PCI-E Module: Insert your compatible 3G/4G LTE Mini PCI-E module into the designated slot on the Base Hat. Secure it with the provided screws if necessary.
3. Włóż kartę Nano SIM: Locate the Nano SIM card socket on the Base Hat. Insert your activated Nano SIM card into the slot until it clicks into place. Ensure the card is oriented correctly.
4. Connect Antennas (Optional): If your Mini PCI-E module requires external antennas, connect them to the appropriate SMA connectors on the Base Hat.
5. Podłączenie zasilania: Connect the Micro USB cable to the 'Main USB' port on the Base Hat. Connect the other end to a power source or your host board's USB port. Alternatively, if using the module standalone, connect it to a PC/Laptop via Micro USB.
6. Power Selection Switch: Adjust the power selection switch (PWR SW) if needed, based on your specific setup and power requirements.

Rysunek 6.1: Instalacja Example

7. Instrukcja obsługi

Once the module is physically set up and powered, follow these general steps for operation:

1. Włączanie: Ensure your host board or PC is powered on. The 3.3V Power LED on the Base Hat should illuminate, indicating power.
2. Instalacja sterownika (jeśli to konieczne): Depending on your operating system and Mini PCI-E module, you may need to install specific drivers. Refer to the documentation for your chosen Mini PCI-E module for driver requirements.
3. Konfiguracja sieci: Configure your operating system to recognize and connect to the 3G/4G LTE network provided by the module. This typically involves setting up APN (Access Point Name) settings.
4. Testing Connectivity: Verify network connectivity by attempting to access the internet or perform a network test.
5. Tryb samodzielny: When connected to a PC/Laptop via Micro USB, the module should be recognized as a USB modem or network adapter, allowing for direct network access.

8. Konserwacja

To ensure the longevity and optimal performance of your Sanpyl 3G/4G LTE Base Hat Module, observe the following maintenance guidelines:

• Zachowaj czystosc: Regularly clean the module with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Unikaj ekstremalnych warunków: Do not expose the module to extreme temperatures, humidity, or direct sunlight beyond its specified operating range.
• Zachowaj ostrożność: Avoid dropping or subjecting the module to physical shock. When inserting or removing components, do so gently to prevent damage to connectors and pins.
• Aktualizacje oprogramowania układowego: Periodically check for firmware updates for your Mini PCI-E module, as these can improve performance and stability.

9. Rozwiązywanie Problemów

If you encounter issues with your 3G/4G LTE Base Hat Module, refer to the following common troubleshooting steps:

• Brak diody LED zasilania: Ensure the Micro USB cable is securely connected and the power source is active. Check the power selection switch (PWR SW) position.
• Moduł nie został wykryty: Verify that the Mini PCI-E module is correctly seated in its slot. Ensure the Base Hat is properly connected to the host board's GPIO or via Micro USB to a PC. Check for necessary drivers on your operating system.
• Brak połączenia sieciowego: Confirm that the Nano SIM card is correctly inserted and activated with a data plan. Check your operating system's network settings, especially the APN configuration. Ensure external antennas (if used) are properly connected.
• Łączność przerywana: This could be due to weak cellular signal. Try relocating the device or using external antennas. Ensure the power supply is stable and sufficient (up to 3 AmpS).
• Przegrzanie modułu: Ensure adequate ventilation around the module and host board. Operating within the specified temperature range (-40℃ ~ 80℃) is crucial.
• Funkcja resetowania: If the module becomes unresponsive, press the 'Reset' button (S1) to restart the module.

If problems persist after attempting these steps, consult the documentation for your specific Mini PCI-E module or contact Sanpyl customer support.