Amazon Basics Keyless Entry Door Lock Deadbolt User Manual

Wstęp

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Amazon Basics Keyless Entry Door Lock Deadbolt. Designed for convenience and security, this electronic keypad deadbolt offers keyless access with customizable security codes and an automatic locking feature. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy wszystkie komponenty są obecne:

• Electronic Keypad Deadbolt Assembly (Exterior and Interior Units)
• Mechanizm zatrzaskowy
• Blacha zaczepowa
• Pakiet śrub
• Keys (for traditional key option)
• Szablon instalacji

The image above displays the complete set of parts you should find in your product package, including the electronic keypad unit, the interior deadbolt assembly, the latch, strike plate, screws, and traditional keys.

Organizować coś

Przed instalacją

• Ensure your door thickness is between 1-3/8 to 1-3/4 inches (35mm to 44mm).
• Verify the backset (distance from door edge to center of bore hole) is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• Prepare the necessary tools: Phillips head screwdriver, tape measure, pencil.
• The lock requires 4 AA batteries (not included). Install fresh batteries before final assembly.

Kroki instalacji

Follow these general steps for installation. For detailed, step-by-step instructions, refer to the included printed manual or the official Gwarancja (PDF) document which often contains installation guides.

1. Przygotuj drzwi: Use the provided installation template to mark and drill holes if your door is not pre-drilled. Ensure the correct backset is selected.



The template provides clear markings for drilling holes, ensuring proper alignment for the deadbolt mechanism and keypad. It supports both 60mm and 70mm backsets.

2. Zainstaluj zatrzask: Insert the latch into the door edge, ensuring the correct orientation for your door swing. Secure it with screws.
3. Montaż zespołu zewnętrznego: Umieść zewnętrzną klawiaturę na drzwiach, wyrównując trzpień z zatrzaskiem.
4. Zamontuj wewnętrzną płytę montażową: Secure the interior mounting plate to the exterior assembly using screws, ensuring it is flush against the door.
5. Zamontuj zespół wewnętrzny: Podłącz kabel od zespołu zewnętrznego do zespołu wewnętrznego. Przymocuj zespół wewnętrzny do płytki montażowej.



This image shows the electronic keypad deadbolt installed on the exterior side of a door, ready for operation. The matte black finish blends seamlessly with the door.



Strona view illustrates how the deadbolt integrates with the door frame, providing a secure locking mechanism. The internal components are neatly concealed.

6. Zainstaluj baterie: Remove the battery cover on the interior assembly and insert 4 new AA batteries, observing polarity. Replace the cover.
7. Wykonaj procedurę obsługi drzwi: This step calibrates the lock to your door's orientation. Follow the specific instructions in your printed manual for this crucial step.

Instrukcja obsługi

Programowanie kodów użytkownika

Your deadbolt comes with a default programming code. You will use this code to set up to 6 unique user codes for family members or temporary single-use codes for guests. Refer to your printed manual for the exact sequence of button presses to add, delete, or modify user codes.

Blokowanie i odblokowywanie

The lock can be operated using the keypad or a traditional key.

• Zablokować: Naciśnij Zamek button (top right button with lock icon) on the keypad. The deadbolt will extend.
• Aby odblokować: Enter your valid user code, then press the Odblokować button (top left button with unlock icon). The deadbolt will retract.
• Automatyczne blokowanie: The deadbolt features an automatic locking function, which can be set to engage 10 to 99 seconds after entry. This provides added peace of mind, ensuring your door is always secured.
• Obsługa ręczna: From the interior, the deadbolt can be manually locked or unlocked using the thumb turn. From the exterior, a traditional key can be used as a backup.

The keypad features illuminated numbers for easy visibility in low light conditions, along with dedicated lock and unlock buttons at the top. The traditional keyhole is located below the keypad.

Konserwacja

Wymiana baterii

The electronic deadbolt is powered by 4 AA batteries. When the batteries are low, the lock may emit a warning sound or the keypad lights may flash. To replace the batteries:

1. Remove the battery cover located on the interior side of the deadbolt assembly. This cover typically slides upwards or detaches with a gentle pull.
2. Ostrożnie wyjmij stare baterie.
3. Włóż 4 nowych baterii AA, zwracając uwagę na prawidłową biegunowość (+/-).
4. Replace the battery cover, making sure it clicks securely into place.

Regularly check battery levels to ensure uninterrupted operation. High usage may require more frequent battery changes.

Czyszczenie

Clean the keypad and lock body with a soft, damp ściereczką. Unikaj stosowania środków czyszczących o działaniu ściernym lub rozpuszczalników, ponieważ mogą one uszkodzić wykończenie i elementy elektroniczne.

Rozwiązywanie problemów

If you encounter issues with your Amazon Basics Keyless Entry Door Lock Deadbolt, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Amazon Basics customer support for further assistance.

Specyfikacje

Gwarancja i wsparcie

For warranty information regarding your Amazon Basics Keyless Entry Door Lock Deadbolt, please refer to the official warranty document provided with your product or available online:

Pobierz gwarancję (PDF)

For additional support, troubleshooting assistance, or to inquire about replacement parts, please visit the Amazon Basics Store or contact Amazon customer service directly.