Instrukcja obsługi kontrolera DMX SHEHDS DMX384

1. Wprowadzenie

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SHEHDS DMX384 DJ Controller. Please read this manual thoroughly before operating the device to ensure safe and efficient use. Retain this manual for future reference.

2. Informacje dotyczące bezpieczeństwa

• Zawsze podłączaj urządzenie do uziemionego gniazdka elektrycznego.
• Upewnij się, że napięcie zasilaniatage odpowiada wymaganiom urządzenia.
• Nie wystawiaj urządzenia na deszcz lub wilgoć.
• Unikaj używania urządzenia w ekstremalnych temperaturach i przy wysokiej wilgotności.
• Nie otwierać casing; wszelkie prace serwisowe należy zlecać wykwalifikowanemu personelowi.
• Trzymaj urządzenie z dala od materiałów łatwopalnych.

3. Koniec produktuview

The SHEHDS DMX384 is an intelligent lighting controller designed for managing DMX-compatible stage lighting equipment. It features 384 control channels, allowing for comprehensive control over multiple fixtures.

3.1 Elementy sterujące na panelu przednim

Rycina 1: Przód view of the SHEHDS DMX384 DJ Controller, displaying the array of faders and control buttons for various functions.

Figure 2: Close-up of the control panel, highlighting the LED digital display, channel faders, and function buttons for scene and program selection.

Na panelu przednim znajdują się:

• Obszar oświetlenia: Controls for individual light fixtures.
• Channel Faders (1-16): Adjust DMX channel values.
• Time Speed Faders: Control fade time and speed for scenes and chases.
• Functional Area: Buttons for program, scene, and bank selection.
• Klawisze sceny: Activate stored scenes.
• Page Change Area: Navigate between different pages of channels (A/B).
• Wyświetlacz LCD: Shows current settings and values.

3.2 Połączenia panelu tylnego

Figure 3: Rear panel of the DMX384 Controller, showing all connection ports.

Rysunek 4: Szczegółowy view of the DMX 512 output, DC input, and USB port on the rear panel.

Na tylnym panelu znajdują się:

• Wejście/wyjście MIDI: For MIDI control (if applicable).
• DMX 512 Output: Standard 3-pin XLR connector for DMX signal output.
• DC Input (9V 1000mA): Power input for the controller.
• Port USB: For potential firmware updates or data transfer (refer to specific software instructions).
• Przycisk zasilania: On/Off control for the device.

4. Konfiguracja

4.1 Rozpakowanie

Figure 5: Contents of the SHEHDS DMX384 Controller package.

Ostrożnie wyjmij wszystkie elementy z opakowania. Sprawdź, czy wszystkie elementy są obecne:

• SHEHDS DMX384 Controller
• Zasilacz (9 V 1000 mA)
• Instrukcja obsługi

4.2 Połączenie zasilania

1. Connect the provided power adapter to the DC Input port on the rear panel of the DMX384 controller.
2. Plug the power adapter into a suitable electrical outlet (9V 1000mA).
3. Ensure the power switch on the rear panel is in the 'OFF' position before connecting.

4.3 Połączenie DMX

1. Use a standard 3-pin DMX cable to connect the DMX 512 Output of the controller to the DMX Input of your first lighting fixture.
2. For multiple fixtures, daisy-chain them by connecting the DMX Output of the first fixture to the DMX Input of the second, and so on.
3. Ensure the last fixture in the chain has a DMX terminator connected to its DMX Output to prevent signal reflection.

5. Instrukcja obsługi

The DMX384 controller provides 384 DMX channels, capable of controlling up to 12 intelligent computer lights, each with 32 channels. It supports 30 bar stacks with 8 scenes each, and 6 slots with up to 240 scenes. Scenes can be recorded with fading and sensitivity settings. The 16 sliders allow direct control of channels, and a built-in amplifier supports music mode operation.

5.1 Włączanie i inicjalizacja

1. Przełącz wyłącznik zasilania na tylnym panelu na pozycję „ON”.
2. The LCD display will illuminate, indicating the controller is ready for operation.

5.2 Setting DMX Addresses

Before controlling your lighting fixtures, ensure each fixture has a unique DMX address set. Refer to your fixture's manual for specific instructions on setting its DMX address.

Note: After setting the DMX address on the controller, press the 'OK' key. The original DMX address will be retained even after shutting down and restarting the unit.

5.3 Basic Channel Control

1. Select the desired scanner (fixture) using the 'SCANNER' buttons (SCAN 1-12).
2. Use the 16 channel faders to adjust the DMX values for the selected fixture's channels. The LCD display will show the current channel values.
3. Use the 'PAGE SELECT' button to switch between channel pages A (1-16) and B (17-32) if your fixture uses more than 16 channels.

5.4 Scene Programming

The controller allows you to program and store multiple scenes.

1. Naciśnij przycisk „PROGRAM”, aby wejść w tryb programowania.
2. Select the desired scanner(s) and adjust their channels using the faders to create your desired lighting state.
3. Press the 'MIDI/ADD' button to save the current lighting state.
4. Select a 'SCENE' button (SCENE 1-8) to store the scene.
5. Repeat for additional scenes.
6. Exit programming mode by pressing the 'PROGRAM' button again.

5.5 Scene Playback

1. Upewnij się, że kontroler nie znajduje się w trybie programowania.
2. Press the desired 'SCENE' button to activate a stored scene.
3. Use the 'FADE TIME' fader to adjust the transition speed between scenes.
4. Use the 'SPEED' fader to adjust the speed of dynamic effects within a scene.

5.6 Chase Programming and Playback

Chases are sequences of scenes that play automatically.

1. Press the 'PROGRAM' button.
2. Press the 'CHASE' button (CHASE 1-6) to select a chase to program.
3. Select and activate scenes in the desired order. Each activated scene will be added to the chase.
4. Press 'MIDI/ADD' after each scene to add it to the chase.
5. Exit programming mode by pressing the 'PROGRAM' button.
6. To play a chase, select the desired 'CHASE' button.

5.7 Tryb muzyczny

The DMX384 features a built-in amplifier for music mode, allowing lighting to react to audio input.

1. Connect an audio source to the controller's audio input (if available, refer to specific model features).
2. Activate 'MUSIC TRIGGER' mode (refer to LCD display and function buttons).
3. The lighting will now respond to the rhythm and intensity of the music.

6. Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the exterior of the controller. Do not use abrasive cleaners or solvents.
• Składowanie: When not in use, store the controller in a dry, dust-free environment.
• Kontrola: Okresowo sprawdzaj wszystkie kable i połączenia pod kątem zużycia i uszkodzeń.

7. Rozwiązywanie Problemów

8. Specyfikacje

• Model: DMX384
• Kanały sterowania: 384 kanałów DMX
• Controllable Fixtures: 12 intelligent computer lights (up to 32 channels each)
• Sceny: 30 banks of 8 programmable scenes (240 total)
• Pościgi: 6 programmable chases (up to 240 steps each)
• Suwaki: 16 channel faders, 2 time speed faders
• Wyświetlacz: Wyświetlacz cyfrowy LED
• Łączność: 3-pin DMX output, DC power input, USB port
• Pobór mocy: DC 9V 1000mA (Corded Electric)
• Tworzywo: Plastic (housing), Aluminum (internal components/heat sinks)
• Wymiary (dł. x szer. x wys.): 24.4" x 8.8" x 5.7" (61.98 cm x 22.35 cm x 14.48 cm)
• Waga: 6.19 funtów (2.81 kg)
• Typ montażu: Rack Mount (Note: Some users report non-standard 19" rack compatibility, verify before rack installation)

9. Gwarancja i wsparcie

SHEHDS zobowiązuje się do dostarczania produktów wysokiej jakości i zadowolenia klienta.

• Zasady wymiany: 1-Month Replacement for manufacturing defects.
• Gwarancja: 1-Year Limited Warranty from the date of purchase.
• Obsługa klienta: For technical support, warranty claims, or general inquiries, please contact SHEHDS customer service through your retailer or the official SHEHDS webstrona.