17E

GVFYY Digital Security Safe Model 17E User Manual

Electronic Security Safe with Digital Code and Key

Wstęp

This manual provides detailed instructions for the setup, operation, and maintenance of your GVFYY Digital Security Safe Model 17E. Please read this manual thoroughly before using the safe to ensure proper function and security.

The safe is designed to protect your valuables with a robust steel construction, featuring both a digital keypad and emergency key access. It is suitable for securing items in homes, offices, and hotels.

Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

  • 1 x GVFYY Digital Electronic Safe Box
  • 2 x klucze awaryjne
  • 2 x śruby kotwiące (do montażu)
  • 4 baterie AA
  • 1 x Instrukcja obsługi (ten dokument)
GVFYY Digital Security Safe with door open, showing interior and included keys.

Image: The GVFYY Digital Security Safe with its door open, revealing the interior and the two emergency keys.

Organizować coś

1. Instalacja baterii

  1. Open the safe door using the emergency key. The keyhole is typically hidden behind a small cover on the keypad panel.
  2. Znajdź komorę baterii po wewnętrznej stronie drzwi sejfu.
  3. Włóż 4 baterie AA (w zestawie) do komory, zwracając uwagę na prawidłową biegunowość (+/-).
  4. Zamknij pokrywę komory baterii.

2. Initial Code Setting (First Use)

Upon first use, the safe typically has a default factory code. It is crucial to change this immediately for security. The default code is often 159.

Diagram showing steps for initial code entry and changing the password.

Image: A visual guide demonstrating the process of entering the initial code and changing the password. Step 1 shows entering "159" and pressing "E". Step 2 shows pressing the red reset button, entering a new 3-8 digit code, and pressing "E".

Instrukcja obsługi

1. Otwieranie sejfu za pomocą kodu cyfrowego

  1. Wprowadź na klawiaturze swój kod osobisty składający się z 3–8 cyfr.
  2. Naciśnij "E" przycisk aby potwierdzić.
  3. If the code is correct, a green light will illuminate for approximately 5 seconds.
  4. Within these 5 seconds, turn the knob clockwise to open the safe door.

2. Otwieranie sejfu kluczem awaryjnym

The emergency key provides access if you forget your code or if the batteries are depleted.

  1. Locate the keyhole cover on the keypad panel and remove it.
  2. Insert the emergency key into the keyhole.
  3. Przekręć klucz w kierunku przeciwnym do ruchu wskazówek zegara.
  4. Jednocześnie przekręć pokrętło zgodnie z ruchem wskazówek zegara, aby otworzyć drzwi sejfu.
  5. Important: Do not store the emergency keys inside the safe. Keep them in a secure, separate location.
Diagram illustrating two methods to open the safe: using keys and knob, or using code and knob.

Image: A visual representation of the two opening methods: Option 1 shows inserting the key and turning the knob. Option 2 shows entering the code on the keypad and turning the knob.

3. Changing Your Personal Code

  1. With the safe door open, locate the small red reset button on the inside of the door, near the hinge.
  2. Press the red reset button. You will hear a beep, and the yellow indicator light on the keypad will illuminate.
  3. Within 5 seconds, enter your new 3 to 8 digit code on the keypad.
  4. Naciśnij "E" button to confirm the new code.
  5. The safe will beep again, and the yellow light will turn off, indicating the new code is set.
  6. Przetestuj nowy kod przy otwartych drzwiach, zanim je zamkniesz.

Installation (Wall or Floor Mounting)

The safe features pre-drilled holes for secure mounting to a wall or floor, preventing unauthorized removal. Two expansion bolts are included for this purpose.

  1. Choose a suitable location for your safe, considering security and accessibility.
  2. Position the safe and mark the drilling points through the pre-drilled holes on the back or bottom of the safe.
  3. Drill holes into the wall or floor using an appropriate drill bit (refer to the anchor bolt size).
  4. Dopasuj sejf do wywierconych otworów.
  5. Przełóż śruby rozporowe przez otwory w sejfie i wkręć je w ścianę/podłogę.
  6. Dokręć śruby, aby zamocować sejf na miejscu.
Diagram showing steps for securing the safe to a wall using screws.

Image: A visual guide demonstrating the process of wall mounting, including drilling, inserting the expansion bolt, and securing the safe.

Konserwacja

  • Wymiana baterii: Replace batteries annually or when the low battery indicator appears (usually a red light or repeated beeps during operation). Always use 4 new AA batteries.
  • Czyszczenie: Przetrzyj zewnętrzną część sejfu miękką szmatką.amp szmatką. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników.
  • Przechowywanie kluczy: Ensure emergency keys are stored in a secure location away from the safe.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Sejf nie otwiera się za pomocą kodu.Incorrect code entered, batteries are low/dead, or knob not turned within 5 seconds.Re-enter code carefully. Replace batteries. Ensure knob is turned immediately after green light appears. Use emergency key if necessary.
Klawiatura nie odpowiada.Baterie są całkowicie rozładowane lub zostały nieprawidłowo zainstalowane.Replace batteries, ensuring correct polarity. Use emergency key to open.
Cannot change code.Red reset button not pressed, or new code not entered within 5 seconds.Ensure the red reset button is pressed firmly. Enter the new code and press "E" promptly after the yellow light illuminates.
Forgotten code.User forgot the programmed digital code.Use the emergency key to open the safe. Once open, you can reset the code following the "Changing Your Personal Code" instructions.

Specyfikacje

MarkaOgólny
Numer modelu17E
Wymiary zewnętrzne (gł. x szer. x wys.)17 cm x 23.1 cm x 17 cm (6.7" x 9.1" x 6.7")
Wymiary wewnętrzne (gł. x szer. x wys.)10.92 cm x 21.08 cm x 16.51 cm (4.3" x 8.3" x 6.5")
Waga3 kg (6.6 funta)
Typ zamkaElectronic Combination Lock, Mechanical Key Lock
TworzywoStal lite
Źródło zasilania4 baterie AA
Długość kodu3 to 8 Digits
Typ montażuMontaż ścienny, montaż podłogowy
GVFYY Digital Security Safe with dimensions labeled.

Image: The GVFYY Digital Security Safe showing its exterior dimensions: 9.1 inches width, 6.7 inches depth, and 6.7 inches height. The slot on top is 4.3 inches wide.

Informacje dotyczące bezpieczeństwa

  • WARNING: Never store the emergency keys inside the safe. Keep them in a secure, easily accessible location outside the safe.
  • Ensure the safe is securely mounted if using the wall/floor mounting feature to prevent theft.
  • Keep the safe door closed and locked when not in use to maintain security.
  • Nie wystawiaj sejfu na działanie ekstremalnych temperatur i wilgoci.

Gwarancja i wsparcie

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer.

For technical support or inquiries, please contact your point of purchase or the manufacturer's customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.