ORCATORCH SD03 Dive Signal Light User Manual

Wstęp

This manual provides comprehensive instructions for the ORCATORCH SD03 Dive Signal Light, a compact and multifunctional beacon designed for underwater use. Please read this manual thoroughly before operating the device to ensure proper function and safety.

Produkt ponadview

The ORCATORCH SD03 is a versatile dive signal light featuring 4 colors (Blue, Red, White, Green) and 8 lighting modes (constant and flashing for each color). It is designed for visibility and marking during scuba diving, with a maximum depth rating of 150 meters.

Komponenty

The ORCATORCH SD03 Dive Signal Light includes the following components:

• SD03 Dive Signal Light unit
• 1 x AA Alkaline battery (included)
• Falrep
• Zapasowe pierścienie uszczelniające
• Instrukcja obsługi
• Karta gwarancyjna

Organizować coś

Instalacja baterii

1. Unscrew the head of the light counter-clockwise to open the battery compartment.
2. Insert one AA Alkaline battery (or a rechargeable 14500 battery) with the positive (+) end facing towards the head of the light.
3. Carefully screw the head back on clockwise until it is fully tightened. Ensure the O-rings are properly seated to maintain waterproof integrity.

Instrukcja obsługi

The SD03 features a simple rotary switch mechanism for operation.

Włączanie/wyłączanie

To turn the light on, tighten the head of the light fully. To turn it off, slightly loosen the head.

Changing Modes and Colors

The SD03 integrates 4 colors (White, Red, Blue, Green) and 8 modes (constant and flashing for each color). To cycle through the modes, tighten and loosen the light body. The sequence is: White (constant) - White (strobe) - Red (constant) - Red (strobe) - Blue (constant) - Blue (strobe) - Green (constant) - Green (strobe).

Funkcja pamięci

The mode used for more than 3 seconds will be memorized. When you turn the SD03 on again, it will start cycling from the memorized mode by default.

Główne cechy

• 4-Color-in-1: Blue, Red, White, and Green colors with 8 modes integrated into one light.
• Constant & Flashing Modes: Easily switch between constant and flashing modes for each color by tightening and loosening the light body.
• Przełącznik obrotowy: Simple twist-on/off operation and mode selection.
• Kompaktowa konstrukcja: Lightweight at only 50g (without battery), making it easy to carry.
• Funkcja pamięci: Remembers the last used mode after 3 seconds of operation.
• Długi czas trwania: Up to 250 hours with a single AA Alkaline battery.
• Deep Underwater Use: Rated for use up to 150 meters underwater.
• Trwała konstrukcja: Made from aircraft-grade high strength aluminum with Type III military hard-anodized anti-abrasive finish.
• Bezpieczne mocowanie: Includes a lanyard for easy attachment to dive equipment, backpacks, or tents.

Konserwacja

Proper maintenance ensures the longevity and reliable performance of your SD03 Dive Signal Light.

• Spłucz po użyciu: After each dive, rinse the light thoroughly with fresh water to remove salt, sand, and other debris.
• Sprawdź pierścienie uszczelniające: Regularly inspect the O-rings for any signs of damage, cracks, or dirt. Replace them if necessary using the provided spare O-rings.
• Lubricate O-rings: Apply a thin layer of silicone grease to the O-rings periodically to maintain their elasticity and ensure a watertight seal.
• Pielęgnacja baterii: Remove the battery if the light will not be used for an extended period to prevent leakage and corrosion.
• Składowanie: Przechowuj lampę w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.

Rozwiązywanie problemów

If you encounter issues with your SD03 Dive Signal Light, refer to the following common troubleshooting steps:

• Światło nie włącza się:
  • Check if the head is fully tightened. The rotary switch requires a complete seal to activate.
  • Verify the battery is inserted correctly with the positive (+) end facing the head.
  • Wymień baterię na nową.
• Light Flickering or Dim:
  • Replace the battery. Low battery power can cause flickering or dimming.
  • Upewnij się, że styki akumulatora są czyste i wolne od korozji.
  • Check that the head is securely tightened.
• Wyciek wody:
  • Immediately turn off the light and remove the battery.
  • Inspect the O-rings for any damage, dirt, or improper seating. Clean or replace as needed.
  • Ensure the threads are clean and free from debris before re-tightening the head.

If the problem persists after following these steps, please contact ORCATORCH customer support.

Specyfikacje

A detailed list of the ORCATORCH SD03 Dive Signal Light's technical specifications:

Gwarancja i wsparcie

Informacje o gwarancji

ORCATORCH provides a 2-year free replacement warranty for products to ensure customer satisfaction. For detailed warranty terms and conditions, please refer to the warranty card included with your product.

Obsługa klienta

For any inquiries, technical assistance, or support, please contact ORCATORCH customer service. We are committed to providing high-quality products and satisfactory services.

• Wsparcie online: Available 24x7.
• Sklep firmowy: Odwiedź ORCATORCH Store on Amazon Więcej produktów i informacji.