1. Wprowadzenie i koniecview
The RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (model PBP002) is designed to provide reliable power for a wide range of RYOBI ONE+ cordless tools. This compact and lightweight battery ensures consistent performance for various applications, enhancing the portability and efficiency of your tools.

Rysunek 1.1: Przód view of the RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) showing the fuel gauge LEDs.
2. Informacje dotyczące bezpieczeństwa
Always read and understand all safety warnings and instructions before using this battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Nie zanurzać akumulatora w wodzie lub innych płynach.
- Nie store the battery in direct sunlight or in temperatures exceeding 50°C (122°F).
- Nie zwarcie biegunów akumulatora.
- Nie wyrzucać baterie do ognia.
- Przechowuj baterię w miejscu niedostępnym dla dzieci.
- Use only with RYOBI ONE+ compatible chargers.
- Jeśli bateria casing is cracked or damaged, nie użyj tego.
- Baterie należy poddawać recyklingowi lub utylizować zgodnie z lokalnymi przepisami.
3. Konfiguracja
Proper setup ensures optimal performance and longevity of your battery.
3.1 Pierwsze ładowanie
Fully charge the battery before its first use. Connect the battery to a compatible RYOBI ONE+ charger. The charger's indicator lights will display the charging status. Refer to your charger's manual for specific light patterns.
3.2 Instalacja baterii
To install the battery into a RYOBI ONE+ tool:
- Align the battery with the battery port on your RYOBI ONE+ tool.
- Wsuń baterię mocno na miejsce, aż usłyszysz kliknięcie, oznaczające, że bateria jest dobrze podłączona.

Rysunek 3.1: Illustrates the correct method for inserting the battery into a compatible RYOBI ONE+ tool.
4. Instrukcja obsługi
Once the battery is charged and installed, it is ready for operation.
4.1 Powering Tools
With the battery securely installed, your RYOBI ONE+ tool is ready for use. Refer to your specific tool's instruction manual for detailed operating procedures.
4.2 Wskaźnik poziomu baterii
The battery features an on-board fuel gauge to indicate the remaining charge. Press the button on the battery to activate the LEDs. The number of illuminated LEDs corresponds to the approximate charge level:
- 4 diody LED: 75-100% naładowania
- 3 diody LED: 50-75% naładowania
- 2 diody LED: 25-50% naładowania
- 1 diod LED: 0-25% naładowania (wkrótce doładuj)

Rysunek 4.1: The battery's fuel gauge showing multiple illuminated LEDs, indicating a high charge level.
5. Konserwacja
Regular maintenance helps extend the life and performance of your battery.
5.1 Czyszczenie
Keep the battery terminals clean and free of dust or debris. Use a dry, clean cloth to wipe the exterior of the battery. Nie use solvents or harsh chemicals.
5.2 Przechowywanie
For long-term storage, store the battery in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the battery with a partial charge (approximately 50%) to help prolong its overall lifespan. Avoid storing fully discharged batteries.
5.3 Praktyki dotyczące opłat
Recharge batteries promptly after use, especially if they are fully discharged. Avoid leaving batteries on the charger for extended periods after they are fully charged, as this can reduce battery life.
6. Rozwiązywanie Problemów
If you encounter issues with your battery, refer to the following common troubleshooting steps.
6.1 Bateria nie ładuje się
- Ensure the charger is properly plugged into a working electrical outlet.
- Sprawdź, czy akumulator jest prawidłowo umieszczony w ładowarce.
- Check for any visible damage to the battery or charger. If damaged, discontinue use.
- Allow the battery to cool down if it is hot from recent use; some chargers will not initiate charging until the battery reaches a safe temperature.
6.2 Tool Not Powering On
- Ensure the battery is fully charged. Check the fuel gauge.
- Verify that the battery is securely installed in the tool until it clicks into place.
- Check for any obstructions or issues with the tool itself. Refer to the tool's manual for specific troubleshooting.
7. Specyfikacje
| Numer modelu | PBP002 |
| Tomtage | 18 wolty |
| Pojemność baterii | 1.5 Ah |
| Skład ogniw baterii | Litowo-jonowy |
| Wymiary produktu (dł. x szer. x wys.) | Wymiary 16.31 x 10.39 x 10.31 cm |
| Waga przedmiotu | 311.84 g (11 uncji) |
| Możliwość ponownego użycia | Możliwość ładowania |
| Zgodne narzędzia | RYOBI 18V ONE+ Tools |
8. Gwarancja
This RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) comes with a 30-dniowa gwarancja from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modifications, or normal wear and tear. For full warranty terms and conditions, please refer to the official RYOBI warranty documentation or webstrona.
9. Obsługa klienta
For technical assistance, warranty claims, or product inquiries, please contact RYOBI Customer Support.
- Producent: RYOBI
- Miejsce prowadzenia działalności: One World Technologies Inc. PO Box 1288 Anderson SC 29622
- For the most up-to-date contact information and support resources, please visit the official RYOBI webstrona.