tectake Bar Table with 4 Stools - Industrial Style

Wstęp

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

Instrukcje bezpieczeństwa

• Przed montażem upewnij się, że wszystkie elementy są kompletne i nieuszkodzone. Nie używaj, jeśli brakuje którejkolwiek części lub jest ona uszkodzona.
• Aby zapobiec zarysowaniom, produkt należy składać na miękkiej i czystej powierzchni.
• Tighten all screws and bolts securely, but do not overtighten to avoid damaging the material.
• Regularnie sprawdzaj wszystkie połączenia, aby mieć pewność, że są szczelne.
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• Aby uniknąć ryzyka zadławienia, trzymaj małe części i materiały opakowaniowe poza zasięgiem dzieci.
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

Zawartość opakowania

Before starting assembly, please verify that all the following components are included in your package:

• 1 x Stół barowy
• 4 x hokery barowe
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 1 x Instrukcja montażu (ten dokument)

Image: Detailed diagram of product dimensions and included components.

Instrukcja montażu

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. Rozpakuj komponenty: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. Złóż ramę stołu: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. Zamontuj blat stołu: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Montaż stelaży stołków: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Zamontuj siedziska stołków: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. Montaż nóżek regulowanych: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. Ostateczne dokręcanie: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

Instrukcja obsługi

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• Stabilność: Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• Oszczędność miejsca: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• Nośność: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• Umieszczenie: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

Konserwacja

Proper care will extend the life and appearance of your tectake furniture set:

• Czyszczenie: Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Regularne kontrole: Okresowo sprawdzaj wszystkie śruby i nakrętki, aby upewnić się, że są dokręcone. W razie potrzeby dokręć je ponownie.
• Ochrona: Use coasters or placemats to protect the tabletop from spills, heat, and scratches.
• Środowisko: Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

Rozwiązywanie problemów

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Chwiejący się stół/stołek:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• Poziom trudności podczas montażu:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• Zarysowania lub wgniecenia:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

Specyfikacje

Gwarancja i wsparcie

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store