BANPESTT CPI-15 Indoor Insect Trap Instruction Manual

Wstęp

The BANPESTT CPI-15 Indoor Insect Trap is designed to effectively control flying insects such as mosquitoes, fruit flies, gnats, and moths within indoor environments. It utilizes a combination of UV light attraction, a quiet suction fan, and a non-toxic sticky glue board to capture pests.

• The UV light emits a 395nm wavelength, highly attractive to various pests.
• A powerful, whisper-quiet fan draws insects into the trap.
• Captured insects are securely held by a sticky glue board at the base.
• This physical method of extermination is safe, noiseless, and chemical-free, making it suitable for kitchens, living rooms, bedrooms, and other indoor spaces.

Zawartość opakowania

Upewnij się, że po rozpakowaniu wszystkie elementy są obecne:

• Insect Trap Unit (x1)
• Kabel USB (x1)
• Power Supply Adapter (x1)
• Instrukcja obsługi (x1)
• Sticky Glue Boards (x6)
• Szczotka do czyszczenia (x1)

Image: What's Included - A visual representation of all components in the BANPESTT CPI-15 package.

Organizować coś

1. Prepare the Sticky Board: Remove the protective layer from one of the circular sticky glue boards.
2. Insert Sticky Board: Separate the bottom tray from the main unit by twisting. Place the prepared sticky board into the bottom tray, ensuring the sticky side faces upwards. Reattach the bottom tray to the main unit by twisting until secure.
3. Podłącz zasilanie: Connect the USB cable to the trap unit and then to the provided power supply adapter. Plug the adapter into a standard electrical outlet.

Image: Easy to Maintain - Illustrates the simple process of replacing the sticky glue board.

Instrukcja obsługi

1. Włączanie/wyłączanie: Press the button located on the top of the unit to turn the trap on or off. The UV light will illuminate when the unit is active.
2. Optymalne rozmieszczenie: For best results, place the trap in a dark room, away from other strong light sources, as insects are attracted to the brightest light. Position the trap near areas where pests are frequently observed, such as near fruits, plants, or garbage cans. An ideal height for placement is approximately 0.8-1.2 meters (about 3 feet) from the ground.
3. Praca ciągła: Allow the trap to operate continuously for at least 5 days to effectively reduce pest populations.

Image: Easy To Setup - Demonstrates the one-click start and stop function, and suggests placing the trap near pest sources in dark environments.

Image: Insect Trap Indoor - Highlights the trap's effectiveness for fruit flies, mosquitoes, and gnats, but not house flies.

How it Works: Triple Capture Technology

The BANPESTT CPI-15 employs a three-pronged approach to pest control:

• Przyciąganie światłem UV: The 395nm UV light lures insects towards the trap.
• Potężny wentylator ssący: A high-speed fan (2400 RPM) creates a strong airflow, sucking insects into the collection area.
• Sticky Glue Board: Insects are then trapped on the non-drying adhesive surface of the glue board, preventing escape.

Image: Triple Capture Technology - A detailed diagram showing how the UV light, fan, and glue board work together.

Konserwacja

1. Replacing Sticky Boards: Replace the sticky board when it is fully covered with insects or after approximately 4-6 weeks of use. Additional replacement sticky pads are available for purchase separately.
2. Czyszczenie urządzenia: Regularly clean the mosquito trap to avoid unnecessary environmental pollution. This product is not waterproof. Do not wash it with water or other liquids. Instead, use the provided small brush to clean any trapped insects from the fan area and a damp szmatką do wycierania powierzchni zewnętrznej.

Image: Catching Results Show - Visual evidence of the trap's effectiveness and instructions for replacing glue boards.

Troubleshooting & Important Reminders

• Skuteczność: This product uses a physical mosquito killer method and takes time to show full effect. It is recommended to operate it for at least 2 hours in advance when used in a bedroom.
• Umieszczenie: Mosquitoes are sensitive to human body temperature, taste, and exhaled carbon dioxide. To avoid influencing the trap's effectiveness, keep the product away from people when in use.
• Warunki oświetleniowe: In the daytime, please close doors, windows, and curtains to ensure optimal dark environmental conditions. Do not place it near air conditioners or electric fan sources. When using, turn off all other lights to ensure the trap's light is the only light source.
• Bezpieczeństwo: Do not look directly at the mosquito killer lights for extended periods.
• Czyszczenie: Nie myć lamp with water or other liquids.
• Działanie: Do not put your hand into the mosquito killer lamp when it is operating to avoid damage or accidents.
• Wyłączone: It is recommended to turn off the power supply when cleaning the trap.

Specyfikacje

Oficjalny film o produkcie

Gwarancja i wsparcie

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BANPESTT webstrona.