CREWORKS SX-DUCV106

CREWORKS Ultrasonic Cleaner

Model: SX-DUCV106

Instrukcja obsługi

Wstęp

This manual provides instructions for the safe and efficient operation of your CREWORKS Ultrasonic Cleaner, Model SX-DUCV106. This device utilizes ultrasonic cavitation to thoroughly clean various items, including vinyl records, jewelry, glasses, and more. Please read this manual carefully before use and retain it for future reference.

Before and after cleaning a vinyl record with the CREWORKS Ultrasonic Cleaner, showing significant dirt removal.

Image: Before and After Cleaning Demonstration

Instrukcje bezpieczeństwa

OSTRZEŻENIE: Nieprzestrzeganie tych instrukcji bezpieczeństwa może spowodować porażenie prądem, pożar lub poważne obrażenia.

  • Only use with grounded electrical outlets.
  • Nie rozmontowuj urządzenia. Wszelkie prace serwisowe zleć wykwalifikowanemu personelowi.
  • Do not operate the unit without water in the tank. Ensure the water level is between the MIN and MAX marks.
  • Nie należy używać łatwopalnych, wybuchowych ani żrących środków czyszczących.
  • Unikaj dotykania elementów elektrycznych mokrymi rękami.
  • Trzymaj urządzenie z dala od dzieci i zwierząt.
  • Ensure proper ventilation during operation, as the unit can generate heat.
  • Unplug the unit from the power source before cleaning or maintenance.

Składniki produktu

The CREWORKS Ultrasonic Cleaner package includes the following items:

  • Ultrasonic Cleaner Unit with Stainless Steel Tank
  • Pokrywa
  • Przewód zasilający
  • Cleaning Basket (for small items)
  • Vinyl Record Washing Rack (holds up to three 7" or 12" records)
  • Vinyl Record Drying Rack
  • Zawór spustowy
All components of the CREWORKS Ultrasonic Cleaner laid out, including the main unit, lid, power cord, cleaning basket, record washing rack, and drying rack.

Obraz: Dołączone komponenty

Organizować coś

  1. Place the ultrasonic cleaner on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
  2. Close the drain valve securely.
  3. Fill the stainless steel tank with water. For enhanced cleaning, a small amount of appropriate cleaning solution can be added. Do not exceed the maximum fill line.
  4. Podłącz przewód zasilający do urządzenia, a następnie do uziemionego gniazdka elektrycznego.
The CREWORKS Ultrasonic Cleaner unit with its lid and control panel visible, ready for setup.

Image: Ultrasonic Cleaner Unit

Działanie

General Cleaning Procedure

  1. After filling the tank (see Setup), place the items to be cleaned into the cleaning basket. Ensure items are fully submerged but not touching the bottom of the tank.
  2. Umieść koszyk czyszczący w zbiorniku.
  3. Set the desired cleaning time using the 'TIME +' and 'TIME -' buttons on the control panel. The timer can be set up to 30 minutes.
  4. Set the desired temperature using the 'TEMP +' and 'TEMP -' buttons. The heater can warm the solution up to 175°F (79°C). Heating can improve cleaning effectiveness for some items.
  5. Press the 'ON/OFF' button for the ultrasonic function to start cleaning. Press the 'ON/OFF' button for the heater function if heating is desired.
  6. The unit will automatically stop when the set time expires.
  7. Carefully remove the cleaning basket and rinse the cleaned items with clean water.

Vinyl Record Cleaning Procedure

  1. Assemble the vinyl record washing rack and place it over the tank.
  2. Carefully mount up to three 7-inch or 12-inch vinyl records onto the rack, ensuring the labels are protected from the cleaning solution.
  3. Lower the records into the tank, ensuring the grooves are submerged in the cleaning solution.
  4. Set the desired cleaning time and temperature as described in the General Cleaning Procedure.
  5. Start the ultrasonic cleaning and heating functions.
  6. Once cleaning is complete, carefully lift the records from the tank.
  7. Place the cleaned records onto the included drying rack to air dry completely before storage or playback.
The CREWORKS Ultrasonic Cleaner with vinyl records mounted on the washing rack, submerged in the cleaning tank.

Image: Vinyl Records in Cleaning Rack

A white plastic drying rack designed to hold multiple vinyl records upright for air drying.

Image: Record Drying Rack

Panel sterowania nadview

The digital control panel allows precise setting of cleaning parameters.

  • SET TEMP (°C) / ACTUAL TEMP (°C): Displays the set temperature and the current actual temperature of the solution.
  • TEMP + / TEMP -: Przyciski służące do zwiększania lub zmniejszania docelowej temperatury.
  • ON/OFF (Heater): Włącza lub wyłącza funkcję grzania.
  • SET TIME (MINUTES SECONDS): Displays the set cleaning duration.
  • TIME + / TIME -: Buttons to increase or decrease the cleaning time.
  • ON/OFF (Ultrasonic): Activates or deactivates the ultrasonic cleaning function.
Close-up of the CREWORKS Ultrasonic Cleaner's digital control panel, showing buttons for temperature and timer settings, and warning labels.

Image: Digital Control Panel

Konserwacja

  1. Opróżnianie zbiornika: After each use, especially if using cleaning solutions, drain the tank by opening the drain valve. Place a container underneath to collect the liquid.
  2. Czyszczenie zbiornika: Rinse the stainless steel tank with clean water. Wipe the interior and exterior surfaces with a soft, damp płótno. Nie używaj ściernych środków czyszczących ani wełny stalowej.
  3. Składowanie: Przed przechowywaniem upewnij się, że urządzenie jest całkowicie suche. Przechowuj w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i wilgoci.
  4. Regularna kontrola: Periodically check the power cord for any damage. Ensure the drain valve operates smoothly.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Urządzenie nie włącza się.No power supply; Power cord not connected; Faulty outlet.Check power cord connection; Test outlet with another device; Ensure unit is plugged into a grounded outlet.
Ultrasonic function not working.Ultrasonic function not activated; Insufficient water in tank.Press the ultrasonic 'ON/OFF' button; Ensure water level is above MIN mark.
Heater not working or overheating.Heater function not activated; Sensor malfunction; Prolonged operation.Press the heater 'ON/OFF' button; Allow unit to cool down; If overheating persists, discontinue use and contact support.
Słabe efekty czyszczenia.Incorrect cleaning solution; Insufficient cleaning time/temperature; Items not properly submerged.Use appropriate cleaning solution for item type; Increase cleaning time or temperature; Ensure items are fully submerged.
Unit is excessively noisy.Normal operation sound; Items touching tank walls.Some operational noise is normal for ultrasonic cleaners. Ensure items are in the basket and not directly touching the tank. Consider operating in a well-ventilated area away from sensitive ears.

Specyfikacje

  • Model: SX-DUCV106
  • Pojemność zbiornika: 1.6 galona (6 litrów)
  • Moc ultradźwiękowa: 180 W
  • Moc grzewcza: Do 200 W
  • Częstotliwość ultradźwiękowa: 40kHz
  • Ustawienia timera: 0-30 minutes (Digital)
  • Ustawienia temperatury: Up to 175°F (79°C) (Digital)
  • Materiał zbiornika: Stal nierdzewna 304
  • Wymiary produktu: Około 12.8 x 6.9 x 10.2 cala
  • Waga przedmiotu: Około 10.5 funtów
Diagram showing the dimensions of the CREWORKS Ultrasonic Cleaner unit and the record drying rack.

Obraz: Wymiary produktu

Gwarancja i wsparcie

CREWORKS products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Please have your model number (SX-DUCV106) and purchase information ready when contacting support.

For the most up-to-date contact information, please visit the official CREWORKS webodwiedź witrynę lub zapoznaj się z dokumentacją zakupu.