AMONIDA S900 LCD Electric Bicycle Display Control Panel User Manual

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your AMONIDA S900 LCD Electric Bicycle Display Control Panel. Designed for 36V and 48V electric bicycles, this display serves as a comprehensive trip computer and control interface for your e-bike's electrical system. Please read this manual thoroughly before use to ensure proper function and safety.

Organizować coś

1. Montaż wyświetlacza

The S900 LCD Display Control Panel is designed for handlebars with a diameter of 22.2mm (0.9 inches). Ensure your handlebars meet this specification for secure mounting.

1. Position the display unit on your handlebar in a location that provides clear visibility and easy access to the remote control buttons.
2. Użyj dostarczonego mocowania klamps and screws to firmly attach the display to the handlebar. Do not overtighten, but ensure it is secure and does not rotate freely.
3. Attach the remote control unit to the handlebar next to the display, ensuring its cable can reach the display's connection port without strain.

Image: The AMONIDA S900 LCD Display Control Panel mounted on handlebars, emphasizing its suitability for 22.2mm diameter handlebars and its function in recording power consumption.

Image: Components of the AMONIDA S900 LCD Display Control Panel, including the display unit, remote control, and separate handlebar mounting rings.

2. Połączenia okablowania

The S900 display features a 5-pin interface for connection to your e-bike's controller. Ensure all connections are secure and correctly aligned to prevent damage.

1. Locate the instrument interface on your e-bike's controller.
2. Connect the 5-pin connector from the S900 display to the corresponding port on the controller. The function can be realized by connecting the meter socket of the display screen to the instrument interface of the controller.
3. Ensure the connection is firm and waterproof.

Obraz: Tył view of the AMONIDA S900 LCD Display Control Panel, highlighting the mounting clamps and the 5-pin interface cable.

Film demonstracyjny konfiguracji

Video: This video demonstrates the basic functionality and display features of the AMONIDA S900 LCD Control Panel, including power-on sequence and data presentation.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

To power on the display, press and hold the power button on the remote control unit. To power off, press and hold the power button again.

2. Funkcje wyświetlania

The S900 display provides a variety of useful data at a glance:

• Wyświetlacz prędkości: Pokazuje aktualną prędkość jazdy.
• Power Assisted Gear Display: Indicates the current level of pedal assist.
• Wskaźnik zasilania: Wyświetla pozostały poziom naładowania baterii.
• Monit o usterkę: Alerts you to system errors.
• Całkowity przebieg: Records the total distance traveled.
• Pojedynczy przebieg: Records the distance for the current trip.
• Headlight Display: Indicates if the headlights are on.
• Single Driving Time Display: Shows the duration of the current trip.

Image: Close-up of the AMONIDA S900 LCD Display screen, showing battery level, speed, mode, and PAS indicators.

Image: Close-up of the AMONIDA S900 LCD Display screen, clearly showing the battery charge level, speed, mode, and PAS (Pedal Assist System) indicators.

3. Control and Setting Functions

The remote control unit allows you to manage various settings and functions:

• Power Switch Control: Włącza/wyłącza wyświetlacz i system roweru elektrycznego.
• Headlight Switch Control: Activates or deactivates the e-bike's headlights.
• 6Km/h Jog Control: Provides a low-speed assist function.
• Ustawienie średnicy koła: Adjusts for different wheel sizes for accurate speed and distance readings.
• Maximum Speed Setting: Configures the maximum assisted speed.
• Idle Automatic Sleep Time Setting: Sets the time before the display enters sleep mode.
• Backlight Brightness Setting: Adjusts the display's backlight intensity.
• Tomtage Level Setting: Configures the display for 36V or 48V systems.
• PAS Connect: Manages the Pedal Assist System levels.

Obraz: Szczegółowy view of the remote control unit for the AMONIDA S900 LCD Display, showing the up, down, and mode buttons.

Film demonstracyjny operacji

Video: This video showcases the AMONIDA S900 LCD Display, highlighting its waterproof design and various data readouts during operation.

Konserwacja

To ensure the longevity and optimal performance of your AMONIDA S900 LCD Display Control Panel, follow these maintenance guidelines:

• Czyszczenie: Przetrzyj ekran wyświetlacza i obudowę miękką szmatką.amp ściereczką. Unikaj stosowania środków czyszczących o działaniu ściernym lub rozpuszczalników, które mogłyby uszkodzić plastik lub ekran.
• Narażenie na działanie wody: While the display has an IP07 rating (meaning it can withstand immersion in water up to 1 meter for 30 minutes), it is best to avoid prolonged exposure to heavy rain or direct water jets. Ensure all connections are dry before powering on.
• Składowanie: When not in use for extended periods, store the e-bike and display in a dry, cool place away from direct sunlight.
• Kontrola kabla: Periodically check all cables and connectors for signs of wear, fraying, or damage. Replace any damaged components immediately.

Rozwiązywanie problemów

If you encounter issues with your S900 LCD Display, refer to the following common problems and solutions:

• Wyświetlacz się nie włącza:
  • Check if the battery is charged and properly connected to the e-bike system.
  • Ensure the 5-pin interface cable is securely connected to both the display and the controller.
  • Sprawdź, czy przycisk zasilania jest wciśnięty i prawidłowo przytrzymany.
• Nieprawidłowe odczyty prędkości/przebiegu:
  • Check the wheel diameter setting in the display's menu. Ensure it matches your e-bike's wheel size.
  • Inspect the speed sensor for proper alignment and any obstructions.
• PAS nie działa:
  • Verify that the PAS system is enabled and correctly configured in the display settings.
  • Check the PAS sensor for proper installation and any damage.
• Na wyświetlaczu pojawia się kod błędu:
  • Refer to your e-bike controller's manual for specific error code interpretations.
  • Jeśli problem będzie się powtarzał, skontaktuj się z obsługą klienta w celu uzyskania pomocy.

Specyfikacje

Gwarancja i wsparcie

Aby uzyskać informacje o gwarancji i pomocy technicznej, zapoznaj się z dokumentacją dołączoną do zakupu lub skontaktuj się bezpośrednio ze sprzedawcą. Zachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.