BOJACK 1803BK/1803B Low Voltage DC Motor Speed Controller User Manual

Wstęp

This manual provides essential information for the safe and efficient operation of your BOJACK 1803BK/1803B Low Voltage DC Motor Speed Controller. This device is designed to control the speed of DC motors by adjusting the Pulse Width Modulation (PWM) duty cycle. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage.

Główne cechy

• Adjustable duty cycle: 0% - 100%
• Integrated switch function for power control.
• Start-up LED light indicator.
• Equipped with a 2A self-recovery fuse for overcurrent protection.
• Compact design for various applications.

Dane techniczne

Ważne informacje dotyczące bezpieczeństwa

• NIE connect this DC motor speed controller directly to household 220V AC power. This device is designed for DC voltagTylko e.
• Upewnij się, że głośność wejściowatage is within the specified range of DC 2.2V-15V. Exceeding this range can damage the device.
• Always use an appropriately rated fuse (slightly higher than your expected maximum current) to ensure safe operation and protect against overcurrent.
• Verify correct polarity (+/-) when connecting power and motor leads to prevent damage to the controller and motor.
• Keep the device away from moisture, extreme temperatures, and flammable materials.
• Installation and wiring should be performed by individuals familiar with basic electronics and safety procedures.
• In case of malfunction or unusual behavior, disconnect power immediately.

Zawartość opakowania

Każdy pakiet zazwyczaj zawiera:

• 2 x BOJACK 1803BK/1803B Low Voltage DC Motor Speed Controller units

Note: Additional components like power supplies, motors, or wiring are not included and must be sourced separately.

Konfiguracja i okablowanie

Before proceeding, ensure all power sources are disconnected. Refer to the wiring diagram below for proper connections.

Obraz: Tył view of the BOJACK 1803BK/1803B DC Motor Speed Controller showing clearly labeled Power and Motor terminals.

1. Identyfikuj terminale: The controller has four clearly marked screw terminals:
   • Moc+: Positive input for the DC power supply.
   • Moc-: Negative input for the DC power supply.
   • Silnik+: Positive output for the DC motor.
   • Silnik-: Negative output for the DC motor.
2. Podłącz zasilanie: Connect the positive (+) terminal of your DC power supply (within 2.2V-15V) to the "Power+" terminal on the controller. Connect the negative (-) terminal of your DC power supply to the "Power-" terminal. Ensure a secure connection.
3. Connect DC Motor: Connect the positive (+) lead of your DC motor to the "Motor+" terminal on the controller. Connect the negative (-) lead of your DC motor to the "Motor-" terminal.
4. Sprawdź połączenia: Double-check all connections for correct polarity and tightness to prevent short circuits or damage.

Obraz: Góra view of the BOJACK 1803BK/1803B DC Motor Speed Controller, showing the potentiometer knob and terminal block.

Instrukcja obsługi

1. Włączanie: Once all connections are secure, connect your DC power supply. The integrated switch on the potentiometer knob controls the power to the motor. Turn the knob clockwise until you hear a click and the start-up LED illuminates, indicating the controller is powered on.
2. Adjust Motor Speed: Continue turning the potentiometer knob clockwise to increase the motor speed. Turning the knob counter-clockwise will decrease the motor speed. The speed can be adjusted from 0% to 100% of the motor's maximum speed at the given input voltage.
3. Obserwuj wskaźnik LED: The LED light indicates that the controller is active and supplying power.
4. Wyłączone: To turn off the motor and controller, rotate the potentiometer knob counter-clockwise until you hear a click and the LED light turns off.

Obraz: kątowy view of the BOJACK 1803BK/1803B DC Motor Speed Controller, highlighting the compact size and control knob.

Konserwacja

• Czyszczenie: Keep the controller clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquids or solvents.
• bezpiecznik: The controller features a self-recovery fuse. If an overcurrent event occurs, the fuse will temporarily disconnect. Allow it to cool down, and it will automatically reset. If frequent disconnections occur, check your motor load and power supply.
• Składowanie: Store the controller in a dry, cool environment when not in use.

Rozwiązywanie problemów

Gwarancja i wsparcie

BOJACK products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the retailer where the product was purchased or visit the official BOJACK webZachowaj paragon jako dowód zakupu.

For further assistance, please contact BOJACK customer service through the platform of purchase.