JORAIR A10-03

JORAIR A10-03 Filter Replacement Kit Instruction Manual

For Tineco A10/A11 Series Cordless Vacuum Cleaners

Produkt ponadview

This manual provides instructions for the JORAIR A10-03 Filter Replacement Kit, designed for various Tineco cordless vacuum cleaner models. The kit includes both pre-filters and HEPA filters to maintain optimal vacuum performance.

JORAIR A10-03 Filter Replacement Kit showing two pre-filters and two HEPA filters

Image: JORAIR A10-03 Filter Replacement Kit, containing two pre-filters and two HEPA filters.

Kompatybilne modele

The JORAIR A10-03 Filter Replacement Kit is compatible with the following Tineco cordless vacuum cleaner models:

  • Tineco A10 Hero
  • Tineco A11 Hero
  • Tineco A10 Master
  • Tineco A11 Master
  • Tineco A11 PET
  • Tineco PURE ONE S11
  • Tineco PWRHERO11 Snap
  • Tineco A10 dash
  • Tineco A10-03
  • Tineco Hero+
  • Tineco Master+
  • Tineco A10/A11 Essential
  • Seria Tineco S11
  • Tineco S12 Pro EX
  • HONITURE S12
  • ILIFE A11
  • Xiaomi S12
  • ZACO A10
Image showing JORAIR filters and a list of compatible Tineco vacuum models

Image: JORAIR filters displayed next to a list of compatible Tineco A10 and A11 series cordless vacuum cleaners.

Co jest w pudełku

Your JORAIR A10-03 Filter Replacement Kit includes:

  • 2 x Pre-Filters
  • 2 filtry HEPA

Instrukcje instalacji

Follow these steps to replace the filters in your compatible Tineco vacuum cleaner:

  1. Ensure your vacuum cleaner is turned off and unplugged (if applicable).
  2. Locate the filter compartment on your vacuum. Refer to your vacuum's original manual for specific instructions on accessing the filters.
  3. Carefully remove the old pre-filter and HEPA filter.
  4. Insert the new JORAIR pre-filter into its designated slot. Ensure it is seated correctly.
  5. Insert the new JORAIR HEPA filter into its designated slot. Ensure it is seated correctly.
  6. Zamknij dokładnie komorę filtra.

Video: Demonstrates the replacement process for A10/A11 series filters. This video shows how to remove and install the pre-filter and HEPA filter in a Tineco vacuum.

Video: Shows the installation of a pre-filter compatible with Tineco A10/A11 vacuum cleaners. This video provides a close-up view of inserting the pre-filter.

Zasady działania

The JORAIR filter kit provides a high-efficiency filtration system for your vacuum. The pre-filter captures larger particles, while the HEPA filter traps fine dust, allergens, and other microscopic particles, ensuring cleaner exhaust air and maintaining strong suction power.

Image showing a high effective filtration system with a HEPA filter

Image: Illustration of the high-efficiency filtration system provided by the HEPA filter.

Obraz przedstawiający szczegółowe view of JORAIR pre-filter and HEPA filter construction

Obraz: Szczegółowy view of the pre-filter and HEPA filter construction, emphasizing their design for effective filtration.

Konserwacja

Proper maintenance of your filters is crucial for extending their lifespan and ensuring your vacuum operates efficiently.

Washing and Reusing Filters

  • Both the pre-filters and HEPA filters are washable and reusable.
  • Wash the filters under running water until the water runs clear.
  • Ważny: Allow the filters to air dry completely for at least 24 hours before reinstallation. Reusing wet filters can damage your vacuum and reduce filtration effectiveness.
Image showing JORAIR filters being washed under running water

Image: JORAIR pre-filter and HEPA filter being rinsed under water, demonstrating their washable design.

Zalecany harmonogram wymiany

  • Filtr wstępny: Wymieniać co 3-4 miesiące.
  • Filtr HEPA: Wymieniaj co 6 miesięcy.

Regular replacement ensures optimal vacuum performance and air quality.

Rozwiązywanie problemów

Jeżeli po wymianie filtrów wystąpią problemy, należy wziąć pod uwagę następujące kwestie:

  • Zmniejszone ssanie:
    • Ensure filters are clean and completely dry before reinstallation.
    • Check that filters are installed correctly and securely in their compartments.
    • Verify that the filter compartment is properly closed.
    • If filters are old, consider replacing them according to the recommended schedule.
  • Nietypowy hałas:
    • A dirty or improperly installed filter can sometimes cause increased noise. Clean or reinstall filters as needed.

Specyfikacje

MarkaJORAIR
TworzywoPre-filter, HEPA
Product Dimensions (Pre-filter)4.76" dł. x 1.57" szer. (w przybliżeniu)
Product Dimensions (HEPA filter)2.56"H x 1.96"D (approx.)
Możliwość ponownego użyciaWielokrotnego użytku (nadające się do prania)
Liczba jednostek4 Count (2 Pre-filters, 2 HEPA filters)
Image showing the dimensions of the JORAIR pre-filter and HEPA filter

Image: Detailed dimensions for both the pre-filter and HEPA filter, indicating length, width, and height.

Gwarancja i wsparcie

This product is an aftermarket replacement filter kit manufactured by JORAIR. It is not a Tineco OEM product and is not covered under Tineco manufacturer's warranty.

For any questions or support regarding your JORAIR filter kit, please refer to the seller's contact information on the platform where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.