Keenso Universal Auto OBD2 + GPS Car HUD Head-up Display Instruction Manual

1. Koniec produktuview

The Keenso Universal Auto OBD2 + GPS Car HUD Head-up Display is designed to project essential driving information directly onto your windshield, enhancing driving safety by keeping your eyes on the road. This device supports both OBD2 and GPS systems, offering a wide range of data display options and alarm functions.

Figure 1: Keenso HUD Head-up Display showing various data points.

Figure 2: Product dimensions of the Keenso HUD unit.

2. Funkcje produktu

• Duży kolorowy wyświetlacz: Provides clear reflective reading for convenient use.
• Kompleksowe wyświetlanie danych: Shows vehicle speed, water temperature, voltage, fuel consumption, rotational speed, single mileage, total mileage accumulation, driving time, driving direction, satellite quantity, altitude, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake air pressure, acceleration test, brake test, clear fault codes, and data stream reading.
• Multi-functional Alarms: Includes overspeed alarm, high water temperature alarm, low pressure alarm, variable speed alarm, and engine failure alarm.
• Zwiększone bezpieczeństwo jazdy: Designed to reduce the possibility of traffic accidents by keeping critical information in the driver's line of sight.

Figure 3: HUD displaying speed and various alarm indicators during driving.

3. Zawartość opakowania

Kompletny zestaw zawiera następujące elementy:

• 1 x Jednostka wyświetlająca
• 1 x linia OBD
• 1 x Car Power Cable (Cigarette Lighter)
• 1 x Instrukcja obsługi
• 1 x ściereczka czyszcząca

Rysunek 4: Koniecview of alarm functions including low voltage, water temperature, speed, and engine failure.

4. Konfiguracja i instalacja

1. Podłącz kabel OBD: Plug the provided OBD cable into your car's OBD interface. This connection enables the HUD to access vehicle data.
2. Podłącz kabel USB: Connect the USB end of the car power cable to the HUD unit and the other end (cigarette lighter plug) into your car's cigarette lighter interface. This provides power to the unit.
3. Navigation Setup (Optional): To use navigation features, download the WiiYii APP software on your smartphone. Establish a Bluetooth connection between the HUD and your smartphone. Navigation information will then be displayed synchronously through the APP.

Figure 5: Power connection options for the HUD unit (OBD and cigarette lighter).

Figure 6: Steps for mobile device interconnection and navigation setup.

5. Instrukcja obsługi

5.1 OBD Mode Functions

When connected via the OBD cable, the HUD can display a wide array of vehicle data:

• Prędkość samochodu
• Temperatura wody
• Tomtage
• Zużycie paliwa
• Prędkość obrotowa (RPM)
• Pojedynczy przebieg
• Total mileage accumulation
• Czas jazdy
• Kierunek jazdy
• Satellite quantity
• Wysokość
• czas systemu
• Ciśnienie wlotowe
• Temperatura oleju
• Stosunek powietrza do paliwa
• Ciśnienie turbiny
• Ciśnienie powietrza dolotowego
• Próba przyspieszenia
• Test hamulca
• Usuń kody usterek
• Czytaj strumień danych

5.2 funkcji alarmu

The HUD provides critical alerts to ensure safe driving:

• Alarm przekroczenia prędkości: Alerts when vehicle speed exceeds a preset limit.
• Rotational Speed Alarm: Alerts when engine RPM exceeds a preset limit.
• Alarm wysokiej temperatury wody: Alerts if engine coolant temperature becomes too high.
• Niska objętośćtagAlarm: Alerts if the vehicle's electrical system voltage spada poniżej bezpiecznego poziomu.
• Alarm awarii silnika: Powiadamia o wykrytych problemach z silnikiem.

5.3 GPS Mode Functions

When operating in GPS mode (typically via the car power cable/cigarette lighter connection), the HUD can display:

• Prędkość pojazdu
• Czas jazdy
• Czas satelitarny
• Wysokość
• Liczba satelitów
• Kierunek jazdy
• Pojedynczy przebieg
• Tomtage
• Próba przyspieszenia
• Test hamulca

Figure 7: Navigation display on the HUD unit, showing speed and directional guidance.

6. Rozwiązywanie Problemów

• Unit Does Not Automatically Shut Down: If the HUD unit does not automatically shut down with the vehicle, access the setting menu. Select the 'sleep voltage' option and adjust its value slightly higher. This can resolve issues with the unit remaining on after the car is turned off.
• Niedokładny odczyt prędkości: If the displayed speed does not match your vehicle's speedometer or GPS, navigate to the speed adjustment settings within the HUD menu. Adjust the percentage value to calibrate the speed reading for accuracy.
• Problemy ze zgodnością: This unit is designed for vehicles complying with OBD II standards. If you receive a message indicating incompatibility, your vehicle may not fully support the OBD II protocol required for this device.
• Syncing Issues with Smartphone (for Navigation): Ensure Bluetooth is enabled on both the HUD and your smartphone. Verify that the WiiYii APP is correctly installed and running. Restarting both devices and attempting to reconnect may resolve connection problems.

Figure 8: Car data scanning and diagnostic process, including scanning and clearing DTCs.

7. Specyfikacje

8. Gwarancja i wsparcie

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Keenso website. Ensure you have your product model and purchase date available when contacting support.

Notatka: Please allow 1-3mm difference due to manual measurement.