Byron DBY-23441 Wireless & Contactless Doorbell Kit Instruction Manual

1. Wprowadzenie

This manual provides instructions for the installation, operation, and maintenance of your Byron DBY-23441 Wireless & Contactless Doorbell Kit. This innovative doorbell offers a hygienic solution by allowing visitors to activate the chime with a simple hand wave, reducing physical contact. It also retains the option for traditional button pressing. The system features a 100-meter wireless range in open areas and offers 60 selectable melodies.

2. Informacje dotyczące bezpieczeństwa

Przed użyciem produktu należy przeczytać i zrozumieć wszystkie instrukcje bezpieczeństwa. Nieprzestrzeganie tych instrukcji może spowodować porażenie prądem, pożar lub poważne obrażenia.

• Keep the product away from water and high humidity.
• Nie próbuj samodzielnie demontować ani naprawiać urządzenia. Wszelkie prace serwisowe zleć wykwalifikowanemu personelowi.
• Bezpieczeństwo baterii:
  • Use only the specified battery types (CR2450 for push button, AA for chime unit).
  • Nie mieszaj starych i nowych baterii ani różnych typów baterii.
  • Włóż baterie zachowując właściwą polaryzację (+/-).
  • Natychmiast wyjmij rozładowane baterie, aby zapobiec wyciekowi.
  • Zutylizuj baterie zgodnie z lokalnymi przepisami.
• Ensure the mounting surface for the push button is stable and secure.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• 1x Contactless Outdoor Push Button (Byron DBY-23441)
• 1x Portable Indoor Chime Unit
• 1x CR2450 Button Cell Battery (for push button)
• 1x dwustronna taśma klejąca
• Screws and Wall Plugs (2x washers mentioned, assuming for screws)
• Instrukcja obsługi

Note: 3x AA alkaline batteries for the indoor chime unit are not included and must be purchased separately.

4. Koniec produktuview

The Byron DBY-23441 kit consists of two main components: the outdoor push button and the indoor chime unit.

4.1 Składniki

Obraz: The Byron DBY-23441 outdoor push button (right) and the indoor chime unit (left).

Obraz: Strona profile of the doorbell push button and chime unit.

• Outdoor Push Button: Features a motion sensor for contactless activation and a traditional press button. It is battery-powered and communicates wirelessly with the chime unit.
• Indoor Chime Unit: Receives signals from the push button and plays a selected melody. It is portable and can be powered by batteries or potentially via a mains adapter (not included, see power section). It has controls for volume and melody selection.

4.2 Główne cechy

• Contactless Activation: Wave your hand in front of the push button to trigger the chime, promoting hygiene.
• Traditional Button Press: Option to press the button for activation.
• Zasięg bezprzewodowy: Up to 100 meters (328 feet) in open field conditions.
• Wybór melodii: Choose from 60 different melodies.
• Regulowana głośność: Up to 85 dB, with a silent mode option.
• Wskaźnik wizualny: Both the push button and chime unit are backlit. In silent mode, the chime unit blinks to indicate a visitor.
• Rozszerzalny system: Compatible with other Byron DBY series chimes and up to 4 push buttons.

5. Konfiguracja i instalacja

5.1 Zasilanie jednostek

1. Outdoor Push Button:
   • Open the battery compartment on the back of the push button.
   • Insert the supplied CR2450 button cell battery, ensuring correct polarity (+/-).
   • Dokładnie zamknij komorę baterii.
2. Indoor Chime Unit:
   • Open the battery compartment on the back of the chime unit.
   • Insert 3x AA alkaline batteries (not included), ensuring correct polarity (+/-).
   • Dokładnie zamknij komorę baterii.
   • Note: While the product description mentions the possibility to connect the "button" to the electrical network, this typically refers to the chime unit for continuous power. If your chime unit has a DC input port, you may use a compatible power adapter (not included) for mains power.

5.2 Montaż przycisku

Choose a suitable location for the outdoor push button, ideally near your entrance and protected from direct heavy rain. Ensure it is within the wireless range of your indoor chime unit.

• Używanie taśmy klejącej:
  • Dokładnie oczyść powierzchnię montażową, aby mieć pewność, że jest sucha i wolna od kurzu i tłuszczu.
  • Peel off one side of the double-sided adhesive tape and apply it firmly to the back of the push button.
  • Peel off the other side of the tape and press the push button firmly onto the desired surface for at least 30 seconds.
• Używanie śrub:
  • Mark the desired drilling points on the wall using the push button as a template.
  • Drill holes and insert the wall plugs (if necessary for your wall type).
  • Secure the push button to the wall using the provided screws.

Obraz: Example of contactless activation at the door.

5.3 Test początkowy

After powering and mounting, test the doorbell system:

• Wave your hand in front of the push button's sensor or press the button.
• The indoor chime unit should sound a melody and its backlight should activate.
• If the chime does not sound, refer to the Troubleshooting section.

6. Instrukcja obsługi

The indoor chime unit features several buttons for customization.

Obraz: Strona view of the chime unit with control buttons.

Obraz: Close-up of the chime unit's control buttons.

6.1 Zmiana melodii

Naciśnij Melody Selection button (often indicated by a music note icon) on the side of the indoor chime unit to cycle through the 60 available melodies. Stop pressing when you hear your desired melody.

6.2 Regulacja głośności

Naciśnij Przycisk głośności (often indicated by a speaker icon) on the side of the indoor chime unit to adjust the sound level. There are multiple volume levels, including a silent mode.

6.3 Tryb cichy

When the chime unit is set to silent mode, it will still provide a visual indication (blinking light) when the push button is activated. This ensures you are aware of visitors without audible disturbance.

6.4 Contactless Activation

To activate the doorbell without physical contact, simply wave your hand approximately 10cm (4 inches) in front of the sensor area on the outdoor push button. The sensor will detect the movement and trigger the chime.

6.5 Traditional Activation

Alternatively, you can press the main button on the outdoor push button to activate the doorbell.

7. Konserwacja

7.1 Wymiana baterii

• Outdoor Push Button (CR2450): When the push button's backlight becomes dim or the range decreases, it's time to replace the battery. Open the battery compartment, remove the old battery, and insert a new CR2450 battery with correct polarity.
• Indoor Chime Unit (3x AA): If the chime unit stops working or the sound becomes weak, replace the 3x AA batteries. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 Czyszczenie

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

8. Rozwiązywanie Problemów

9. Specyfikacje

10. Gwarancja i wsparcie

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Byron customer support.

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Byron customer service through their official webwitrynę lub sprzedawcę, u którego dokonałeś zakupu produktu.