TUXING TXEDT033 4500Psi PCP Air Compressor Instruction Manual

1. Koniec produktuview

The TUXING TXEDT033 is a high-pressure PCP air compressor designed for filling large capacity bottles, such as those used for PCP air rifles, paintball tanks, and diving cylinders. It features a two-stage compression system, an integrated water and fan cooling system, and automatic stop and purge functions for efficient and safe operation.

• Tomtage: 110 V, 60 Hz
• Moc: 2.2kW
• Przepływ: 45 l/min
• Ciśnienie robocze: 30MPa / 300bar / 4500psi
• Układ chłodzenia: Built-in water and fan cooling
• Cechy: Auto-stop, auto-purge, two-stage compression, built-in water tank, oil-water filter

Rysunek 1: Koniecview of the TUXING TXEDT033 Air Compressor with key components labeled, including the cooling system switch, power switch, pressure gauge, temperature gauge, double filter, bleed valve, oil level line, plug, and high-pressure working cylinder.

2. Informacje dotyczące bezpieczeństwa

Read and understand all safety warnings and instructions before operating this air compressor. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.

• Zagrożenie wysokim ciśnieniem: This compressor generates extremely high pressure. Always ensure all connections are secure and rated for the operating pressure. Never point the air outlet at yourself or others.
• Bezpieczeństwo elektryczne: Connect the compressor only to a properly grounded 110V, 60Hz power outlet. Do not operate in wet conditions. Ensure hands are dry when handling electrical components.
• Zagrożenie cieplne: The compressor and its components can become very hot during operation. Avoid direct contact with hot surfaces. Allow the unit to cool down before handling or performing maintenance.
• Wentylacja: Aby zapobiec przegrzaniu i zapewnić właściwy dopływ powietrza, należy używać sprężarki w dobrze wentylowanym pomieszczeniu.
• Oil and Water: Always ensure proper oil levels and that the water cooling system is functioning correctly before and during operation. Regularly drain condensed water and oil.
• Dzieci i osoby postronne: Trzymać dzieci i osoby nieupoważnione z dala od obszaru roboczego.
• Środki ochrony osobistej: Wear appropriate safety glasses and hearing protection during operation.

3. Konfiguracja początkowa

Przed pierwszym użyciem należy wykonać następujące czynności konfiguracyjne:

1. Dodaj olej sprężarkowy:

   Locate the oil fill port and oil level sight glass. Fill the compressor with appropriate high-pressure compressor oil (e.g., Mobil 1 synthetic oil is recommended by some users) until the oil level reaches the red dot in the sight glass. Do not overfill. The compressor is shipped without oil.

   

   Rysunek 2: Wewnętrzne view highlighting the compressor's engine block, where oil is added and the oil level is checked via the sight glass.

2. Prepare Water Cooling System:

   The TXEDT033 features a built-in water tank and pump. Fill the water tank with distilled water or a water/coolant mixture up to the "MAX FILL" line. Ensure the water pump is submerged and connected. The cooling system helps dissipate heat during operation.

   

   Rysunek 3: Strona view of the compressor, showing the integrated water tank with a "MAX FILL" indicator.

3. Podłącz wąż powietrza:

   Attach the high-pressure air hose to the compressor's outlet and to the cylinder or device you intend to fill. Ensure all connections are tight and leak-free.

4. Podłączenie zasilania:

   Connect the compressor to a standard 110V, 60Hz grounded power outlet.

4. Instrukcja obsługi

Aby zapewnić bezpieczną i efektywną obsługę, należy wykonać następujące czynności:

1. Kontrola przed rozpoczęciem pracy:
   • Sprawdź, czy poziom oleju jest prawidłowy.
   • Ensure water tank is filled and cooling system hoses are properly connected.
   • Sprawdź, czy wszystkie połączenia powietrzne są bezpieczne.
   • Open the bleed valve before starting to reduce initial load during break-in or to release residual pressure.
2. Set Auto-Stop Pressure:

   Use the control panel to set the desired auto-stop pressure. The compressor will automatically shut off once this pressure is reached. Refer to the pressure gauge for current pressure readings.

   

   Figure 4: The control panel features a digital display for pressure readings (BAR/PSI), and buttons to adjust the auto purge interval and auto stop pressure.

3. Uruchom układ chłodzenia:

   Turn on the cooling system switch. Ensure the water pump is circulating water and the fan is operating.
4. Uruchom kompresor:

   Turn on the compressor power switch. The compressor will begin to fill the connected cylinder. Monitor the pressure gauge and temperature gauge during operation.

5. Funkcja automatycznego czyszczenia:

   The compressor is equipped with an auto purge function to automatically drain excess oil and water, protecting the machine from moisture buildup. You can set the purge interval via the control panel.

6. Completion of Filling:

   The compressor will automatically shut off when the preset pressure is reached. Turn off the compressor and cooling system switches. Slowly open the bleed valve to release any residual pressure in the hose before disconnecting the air hose from the cylinder.

5. Konserwacja

Regular maintenance ensures optimal performance and extends the lifespan of your compressor.

• Wymiana oleju:

  Change the compressor oil after the first few hours of operation (e.g., after 3-5 hours) to remove break-in contaminants. Subsequently, change oil every 20-30 hours of use or as recommended by the oil manufacturer. Always use high-quality synthetic compressor oil.

• Drain Auto Purge Valve:

  The auto purge valve automatically drains excess oil and water. Ensure this function is operating correctly. Manually drain if necessary to prevent moisture buildup.

• Układ chłodzenia wodnego:

  Regularly check the water level in the cooling tank and refill with distilled water or coolant as needed. Inspect cooling hoses for kinks or damage. Clean the cooling fan and radiator fins to ensure efficient heat dissipation.

  

  Rysunek 5: Wewnętrzne view of the compressor, illustrating the components of the water and fan cooling system.

• Filtry powietrza:

  Inspect and replace air filters as needed. The compressor features a double filter system for cleaner air output.

  

  Figure 6: The oil-water separator, an essential part of the filtration system, ensures clean air output by filtering impurities.
• Burst Disks:

  The compressor is equipped with burst disks as a safety measure. If a burst disk activates, replace it with an original TUXING spare part. Always ensure the correct pressure setting to avoid premature disk activation.

6. Rozwiązywanie Problemów

W tej sekcji omówiono typowe problemy, jakie mogą wystąpić podczas użytkowania sprężarki.

7. Specyfikacje techniczne

Figure 7: Diagram illustrating the dimensions of the TUXING TXEDT033 Air Compressor.

8. Gwarancja i wsparcie

The main part of the TUXING TXEDT033 air compressor comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact TUXING Official Store customer service. You can typically find contact information on the seller's platform or through the official TUXING webstrona.

• Obsługa klienta: Available for assistance with product use and issues.
• Zwroty: 30-day easy returns policy may apply, check with your retailer.