Tucok 193MAX 2

Tucok 193MAX2 Drone User Manual

Model: 193MAX 2

Brand: Tucok

1. Wprowadzenie i najważniejsze cechy

The Tucok 193MAX2 Drone is an advanced quadcopter designed for adults, featuring a 4K camera with a 3-axis gimbal and Electronic Image Stabilization (EIS) for stable and high-quality aerial photography and videography. It boasts a long flight time, robust wind resistance, and intelligent flight modes for an enhanced user experience.

  • 9800ft Real-time Video Transmission with Obstacle Avoidance: Connects via Wi-Fi for quick snaps and transmits 1080P footage in real-time up to 9800ft (3KM). The Obstacle Avoider uses a laser to scan for and avoid obstacles.
  • 4K Camera with Gimbal and EIS Technology: Captures photos at up to 4K (4096x3072) resolution and 2K@25fps video. The 3-axis mechanical gimbal and EIS ensure stable shooting. Features 50x digital zoom and a 90-degree adjustable lens.
  • 52 Mins Long Flight Time & Level 7 Wind Resistance: Each 7.6V 3400mAh battery provides up to 26 minutes of flight, totaling 52 minutes with two included batteries. Brushless motors ensure quiet and stable flight even in windy conditions.
  • Automatyczny powrót GPS: The drone automatically returns to the take-off point when the battery is low, signal is lost, or the one-button return is pressed.
  • Intelligent Flight Functions: Includes GPS Follow Me, Point of Interest, and Waypoint Fly functions for versatile aerial capture.
Tucok 193MAX2 Drone and accessories

Figure 1.1: Tucok 193MAX2 Drone with remote control, batteries, and obstacle avoidance module.

2. Co znajduje się w pudełku

Your Tucok 193MAX2 Drone package includes the following components:

  • 1 x Tucok 193MAX2 Drone
  • 1 x Nadajnik (Pilot)
  • 2 x 7.6V 3400mAh Batteries
  • 4 x Propeller Blades (Spare)
  • 1 x Skrócona instrukcja obsługi
  • 1 x Instrukcja obsługi
  • 1 x torba przenośna
  • 1 x kabel USB
  • 1 x śrubokręt
  • 8 x Screws (Spare)
Contents of the Tucok 193MAX2 Drone package

Figure 2.1: All components included in the Tucok 193MAX2 Drone package.

3. Środki ostrożności

Please strictly follow these instructions to avoid injury and ensure safe operation:

  1. It is recommended to use the drone in an environment that is not crowded.
  2. Comply with relevant local laws and regulations, understand the restrictions and requirements of airspace, and use this product responsibly.
  3. The battery should be kept away from fire and flammable materials. It cannot be squeezed or disassembled. Ensure indoor charging.
  4. This product contains small parts; please place them properly to avoid choking hazards for children.
  5. The indoor optical flow mode cannot enable the GPS mode. GPS mode requires outdoor open space without blocking.

Video 3.1: Important safety considerations for drone operation.

This video highlights critical safety precautions, including operating in uncrowded areas, adhering to local regulations, proper battery handling, and awareness of small parts. It also clarifies the use of optical flow mode versus GPS mode.

4. Konfiguracja i kalibracja

Follow these steps to prepare your drone for flight:

4.1 Preparation Before Flight

  1. Remove the protective cover of the gimbal.
  2. Install the obstacle avoidance equipment on top of the drone.
  3. Unfold the drone's arms: first unfold the front arms, then the rear arms.
Folding the drone armsUnfolding the drone armsInstalling the obstacle avoidance module

Figure 4.1: Steps for unfolding the drone and installing the obstacle avoidance module.

4.2 Entering Channel Mode (Step 1)

  1. Lay the drone flat on the ground.
  2. Włącz pilota.
  3. Long press the drone battery switch. Wait for about 30-40 seconds.
  4. After the remote control makes a beep, the code-to-code connection is successful. The Mode-0 on the remote control monitor becomes Mode-1 (optical flow mode).

4.3 Entering Geomagnetic Calibration (Step 2)

  1. Press the photo button on the remote control for about 5 seconds.
  2. A beep sound from the remote control will be heard, and the drone lights will flash. Release the button.
  3. Pick up the drone and take it about a meter off the ground.
  4. Rotate the drone horizontally clockwise until you hear a beep from the remote.
  5. Erect the drone (camera facing down) and turn it in a circle clockwise until you hear another beep from the remote.
  6. Geomagnetic correction is completed. The drone light will change into a flashing pattern (every 1 second).

4.4 Gyroscope and Gimbal Level Calibration (Step 3)

  1. Press the speed key on the remote control for about 5 seconds.
  2. A beep sound from the remote control will be heard, and the drone lights will flash.
  3. Gyroscope and gimbal are calibrated simultaneously. Release the button.

4.5 Entering Search GPS Mode (Step 4)

  1. The drone will automatically enter star search mode.
  2. When the number of satellites has reached about 10, positioning is complete. The remote will enter the GPS function with a beep.
  3. The aircraft lamp will be continuously bright. Mode-1 will turn into Mode-2.
  4. At this point, the drone is in GPS mode with the GPS feature enabled.

Video 4.2: Detailed steps for drone setup and calibration, including channel mode, geomagnetic calibration, gyroscope/gimbal calibration, and GPS mode activation.

This video provides a comprehensive guide to preparing the drone for flight, covering all necessary calibration steps to ensure stable and accurate operation.

4.6 Łączenie z Wi-Fi

  1. Scan the corresponding 2D code (found in the quick start guide or user manual) to download the XIL MAX app.
  2. Enter your phone's setup option and turn on the wireless network.
  3. Szukaj the device (e.g.,

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.