Instrukcja obsługi wytwornicy mgły Theefun 2500CFM z 9 diodami LED

Wstęp

This manual provides detailed instructions for the safe and effective operation of your Theefun 2500CFM Fog Machine with 9 LED Lights. Please read this manual thoroughly before initial use and retain it for future reference. This fog machine is designed to produce atmospheric fog effects for various events, including parties, stages, and special occasions, enhanced by integrated LED lighting.

Informacje dotyczące bezpieczeństwa

• Do stosowania wewnątrz i na zewnątrz: Upewnij się, że maszyna jest ustawiona na stabilnej, równej powierzchni.
• Fog Fluid: Use only high-quality, water-based fog fluid specifically designed for fog machines. Do not use flammable liquids or other substitutes. Fog fluid is not included.
• Wentylacja: Ensure adequate ventilation around the machine to prevent overheating. Do not block air vents.
• Gorące powierzchnie: The nozzle and surrounding areas become very hot during operation. NIE DOTYKAĆ the nozzle or machine housing during or immediately after use. Allow sufficient time for cooling.
• Bezpieczeństwo elektryczne: Podłącz maszynę do uziemionego gniazdka elektrycznego o odpowiednim napięciu.tage (AC 100-200V/60Hz or AC 220V-240V/50Hz). Do not overload electrical circuits.
• Trzymać z dala od dzieci: Ten produkt nie jest zabawką. Trzymaj poza zasięgiem dzieci i zwierząt.
• Zabezpieczenie przed przegrzaniem: The machine is equipped with overheat protection. If the temperature becomes too high, it will automatically cut off power. Allow the unit to cool down for a few minutes before resuming operation.
• Poziom cieczy: Monitor the fog fluid level. Operating the machine without sufficient fluid can cause damage.

Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

• Theefun Fog Machine Unit
• Bezprzewodowy pilot zdalnego sterowania
• Kabel zasilający
• Instrukcja obsługi (ten dokument)

Produkt ponadview

Familiarize yourself with the components of your fog machine:

Opis obrazu: A labeled diagram of the Theefun Fog Machine. Key components identified include the carrying handle, the liquid tank, the fog outlet with 9 LED lights surrounding it, the main ON/OFF power switch, the dedicated Fog button, the power socket with fuse protection, and an oil level indicator for the fog fluid tank.

• Uchwyt: Dla łatwego przenoszenia.
• Zbiornik: Reservoir for fog fluid (500ml capacity).
• Fog Outlet: Where fog is emitted.
• 9 diody LED: Integrated lights around the fog outlet for color effects.
• Przycisk WŁ./WYŁ.: Główny wyłącznik zasilania urządzenia.
• Przycisk mgły: Manual button to activate fog output.
• Gniazdo zasilania: Connection point for the power cable, includes fuse protection.
• Poziom oleju: Indicator to monitor the amount of fog fluid in the tank.

Instrukcje konfiguracji

Wykonaj poniższe kroki w celu wstępnej konfiguracji:

1. Umieszczenie: Place the fog machine on a flat, stable, and heat-resistant surface. Ensure there is clear space around the machine for proper ventilation and fog dispersion.
2. Fill Fog Liquid: Unscrew the cap of the liquid tank and carefully pour appropriate fog fluid into the tank. Ensure the metal nozzle inside the tank is fully immersed in the fluid. Do not overfill.
3. Podłącz zasilanie: Insert the power cable into the power socket on the back of the machine, then plug the other end into a suitable grounded electrical outlet.
4. Włączanie: Flip the main ON/OFF switch to the 'ON' position. The machine will begin to preheat. The initial warm-up time is approximately 3-5 minutes. Subsequent warm-ups will take 1-2 minutes.
5. Wait for Ready: The machine is ready for operation once the preheating cycle is complete.

Opis obrazu: A visual guide illustrating the setup process. Step 1 shows pouring fog liquid into the tank. Step 2 depicts connecting the power cable and turning on the main switch. Step 3 indicates the preheating time. Step 4 shows pressing the 'ON' button on the remote to activate fog output.

Instrukcja obsługi

The Theefun Fog Machine can be operated using the included wireless remote control.

Opis obrazu: The wireless remote control for the fog machine, displaying buttons for fog activation and LED light control. Below, a grid of images shows the fog machine emitting fog in various colors, demonstrating the 12 color options and 3 color modes.

Funkcje pilota zdalnego sterowania:

• FOG ON/OFF: Press the 'FOG ON' button to initiate fog output. Press 'FOG OFF' to stop. The machine will spray for 20-30 seconds, then automatically preheat again. You must press the 'FOG ON' button after each preheating cycle to continue fog output.
• LED WŁ./WYŁ.: Press the 'LED ON' button to turn on the LED lights. Press 'LED OFF' to turn them off.
• Tryby kolorów: The remote allows you to switch between 12 single-color modes, 2 color-changing modes, and a white flashing mode. Refer to the remote control for specific color buttons.

Ogólne zasady działania:

• Once the machine has preheated, press the 'FOG ON' button on the remote. Fog will be emitted from the nozzle.
• Select your desired LED light color or mode using the corresponding buttons on the remote.
• Monitor the fog fluid level during extended use. Refill as necessary to prevent damage.

Konserwacja

Proper maintenance ensures the longevity and optimal performance of your fog machine.

• Czyszczenie: After every 40 hours of continuous operation, or if the machine shows signs of reduced output, it is recommended to run a cleaning solution through the system. Use a commercially available fog machine cleaning solution or a mixture of 80% distilled water and 20% white vinegar. Run this solution through the machine for 10-15 minutes in a well-ventilated area.
• Czyszczenie zewnętrzne: Wipe the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter internal components.
• Składowanie: When not in use, ensure the machine is completely cool and drained of any remaining fog fluid. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Wymiana bezpiecznika: If the machine does not power on, check the fuse located near the power socket. Replace with a fuse of the same type and rating if necessary.

Rozwiązywanie problemów

Jeśli napotkasz problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:

Specyfikacje

Opis obrazu: The Theefun Fog Machine displayed alongside a table of its technical specifications. The table details Voltage, Power, Tank Capacity, Warm Up Time, Remote Distance, and Output, providing a quick reference for the product's capabilities.

Gwarancja i wsparcie

Theefun products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Theefun webStrona. Kontaktując się z pomocą techniczną, prosimy o przygotowanie modelu produktu i daty zakupu.