1. Informacje dotyczące bezpieczeństwa
Please read all instructions carefully before assembly and use. Failure to follow safety guidelines may result in injury or damage to the product.
- Limit wagowy: Do not exceed the maximum weight limit of 154 pounds (69.85 kg). Exceeding this limit can lead to instability and potential safety hazards.
- Montaż: Improper assembly may result in instability or safety issues. It is recommended that assembly be performed by two adults.
- Luz: Ensure there is adequate clearance around the desk during height adjustments to prevent pinching or crushing.
- Moc: Używaj wyłącznie dołączonego zasilacza. Odłącz zasilanie przed czyszczeniem lub konserwacją.
- Dzieci i zwierzęta: Podczas pracy urządzenia należy trzymać dzieci i zwierzęta z dala od biurka.
2. Koniec produktuview
The FLEXISPOT EN1 Electric Standing Desk is designed to provide a versatile and ergonomic workspace. It features a robust electric lifting system, a durable single-piece desktop, and a programmable control panel for easy height adjustments.
Figure 2.1: The FLEXISPOT EN1 Standing Desk, showcasing its sleek black design and electric height adjustment feature in a typical office environment.
Figure 2.2: The FLEXISPOT EN1 Standing Desk integrated into a home office or gaming setup, demonstrating its practical use and aesthetic appeal.
Główne cechy:
- Elektryczna regulacja wysokości: Smooth and quiet motor for effortless transitions between sitting and standing positions.
- Single-Piece Desktop: Provides enhanced stability and a seamless work surface compared to multi-piece desktops.
- Programmable Control Panel: Features an LED display and memory presets for quick access to preferred heights.
- Solidna konstrukcja: Made with high-quality steel for durability and stability.
Figure 2.3: Visual comparison highlighting the stability advantage of the FLEXISPOT EN1's single-piece desktop over a two-piece design.
3. Instalacja i montaż
The FLEXISPOT EN1 desk requires assembly. All necessary tools are included. For optimal safety and ease, it is highly recommended that two people perform the assembly.
Kroki montażu:
- Rozpakuj komponenty: Ostrożnie wyjmij wszystkie części z opakowania i sprawdź je na dołączonej liście części.
- Złóż nogi: Attach the desk legs to the crossbeam according to the provided diagrams. Ensure all screws are securely tightened.
- Dołącz pulpit: Carefully place the desktop upside down on a soft, clean surface. Align the assembled frame with the pre-drilled holes on the underside of the desktop. Secure the frame to the desktop using the provided screws. Note: Some users have reported that a few holes may not be pre-drilled; exercise caution and pre-drill if necessary to avoid cracking the tabletop.
- Zainstaluj Panel sterowania: Mount the control panel to the underside of the desktop in the designated area. Connect the motor and control panel cables.
- Zarządzanie kablami: Use the included cable ties or clips to manage and secure all cables, preventing entanglement during height adjustments.
- Ostateczne umiejscowienie: With assistance, carefully flip the desk upright and place it in its desired location. Ensure the desk is level and stable.
Figure 3.1: Image showing the dual-stage legs of the FLEXISPOT EN1 desk, which enable continuous and smooth height adjustment.
4. Instrukcja obsługi
The FLEXISPOT EN1 desk features an intuitive control panel for easy height adjustments and memory settings.
Rysunek 4.1: Zbliżenie view of the FLEXISPOT EN1's programmable control panel, showing the LED display, up/down buttons, and four height memory settings.
Funkcje panelu sterowania:
- Strzałki w górę/w dół (▲ / ▼): Press and hold to manually adjust the desk height upwards or downwards. Release the button to stop at the desired height.
- Wyświetlacz LED: Pokazuje aktualną wysokość biurka w calach.
- Ustawienia pamięci (1, 2, 3, 4): These buttons allow you to save and recall up to four preferred height settings.
Ustawianie ustawień pamięci:
- Dostosuj wysokość biurka do swoich potrzeb, korzystając ze strzałek w górę/w dół.
- Press the 'M' button (or the 'i' button on some models, as indicated in Figure 4.1). The LED display will show 'S-'.
- Within 3 seconds, press the desired memory preset button (1, 2, 3, or 4). The display will show 'S-1', 'S-2', etc., confirming the height has been saved.
Przywoływanie ustawień pamięci:
- Simply press the corresponding memory preset button (1, 2, 3, or 4). The desk will automatically move to the saved height.
5. Konserwacja
Regular maintenance ensures the longevity and optimal performance of your FLEXISPOT EN1 desk.
- Czyszczenie: Przetrzyj blat i ramę miękką szmatką.amp płótno. Unikaj ściernych środków czyszczących lub ostrych środków chemicznych, które mogą uszkodzić wykończenie.
- Zarządzanie kablami: Periodically check that all cables are securely managed and not interfering with the desk's movement.
- Dokręcenie śrub: Z czasem śruby mogą się poluzować. Regularnie sprawdzaj i dokręcaj wszystkie śruby montażowe, aby zachować stabilność.
- Smarowanie silnika: The motor mechanism is generally maintenance-free. If you notice any unusual sounds or stiffness, consult the manufacturer's support. Do not attempt to lubricate internal components unless specifically instructed.
6. Rozwiązywanie Problemów
If you encounter issues with your FLEXISPOT EN1 desk, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Desk does not move or only moves in one direction (e.g., only down). | Power issue, motor error, or control panel malfunction. | 1. Check power connections; ensure the desk is plugged into a working outlet. 2. Unplug the desk for 30 seconds, then plug it back in to reset the system. 3. Perform a calibration/reset procedure (refer to specific instructions in your full manual or contact support). |
| Desk movement is slow or noisy. | Overload, obstruction, or motor wear. | 1. Reduce the weight on the desk; ensure it is within the 154 lb limit. 2. Check for any obstructions preventing smooth movement. 3. If noise persists, contact FLEXISPOT customer support. |
| Biurko jest niestabilne lub chwiejne. | Loose screws, uneven floor, or excessive weight. | 1. Check and tighten all assembly screws, especially those connecting the legs to the desktop. 2. Ensure the desk is on a flat, level surface. Adjust leveling feet if available. 3. Verify the weight on the desk does not exceed the maximum capacity. |
| Memory presets are not working or saving. | Incorrect saving procedure or control panel issue. | 1. Adview the 'Setting Memory Presets' section (Section 4) and ensure steps are followed correctly. 2. Try resetting the desk by unplugging and replugging it. 3. If the issue persists, the control panel may need replacement; contact support. |
Jeśli powyższe rozwiązania nie rozwiążą problemu, skontaktuj się z działem obsługi klienta FLEXISPOT, aby uzyskać dalszą pomoc.
7. Specyfikacje
Detailed technical specifications for the FLEXISPOT EN1 Electric Standing Desk.
Figure 7.1: Diagram illustrating the key dimensions of the FLEXISPOT EN1 Standing Desk, including height, width, and depth.
Figure 7.2: Detailed diagram showing the desktop size (48"x24") and the adjustable height range of the desk frame (28.9"-46.5").
| Specyfikacja | Szczegół |
|---|---|
| Marka | ELASTYCZNI |
| Numer modelu | 156E |
| Wymiary produktu (Gł. x Szer. x Wys.) | 24" gł. x 48" szer. x 46.3" wys. |
| Minimalna wysokość | 28.9 cali |
| Maksymalna wysokość | 46.3 cali |
| Maksymalna zalecana waga | 132 funtów (60 kg) - Note: Product description states 154 lbs, safety info states 154 lbs. Using 132 lbs from specifications table as a conservative value. |
| Waga przedmiotu | 36.29 kilograma (ok. 80 funty) |
| Najlepszy rodzaj materiału | Alloy Steel (Desktop is typically particle board with laminate, frame is steel) |
| Materiał nóg meblowych | High-quality Steel Finish |
| Rodzaj wykończenia | Steel (Frame), Black (Desktop) |
| Funkcja specjalna | Elektryczna regulacja wysokości |
| Wymagany montaż | Tak |
| Zawiera wszystkie narzędzia montażowe | Tak |
| Mechanizm podnoszący | Elektryczny |
| UPC | 810072798848 |
8. Gwarancja i wsparcie
FLEXISPOT provides a full warranty for the EN1 Electric Standing Desk. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official FLEXISPOT webstrona.
Obsługa klienta:
If you have any questions, require technical assistance, or need to report a problem, please contact FLEXISPOT customer support:
- Webstrona: Odwiedź oficjalną stronę FLEXISPOT webwitryna z odpowiedziami na często zadawane pytania, zasobami pomocy i informacjami kontaktowymi.
- E-mail/Telefon: Zapoznaj się z opakowaniem produktu lub z instrukcją FLEXISPOT webna naszej stronie znajdziesz najnowsze dane kontaktowe.
Please have your model number (EN1 or 156E) and purchase date ready when contacting support.