POLAMD BSR-MJQNB Professional Cordless Electric Manicure Pedicure Kit User Manual

Wstęp

This manual provides detailed instructions for the safe and effective use of your POLAMD BSR-MJQNB Professional Cordless Electric Manicure Pedicure Kit. This salon-quality device is designed for trimming, grinding, and polishing natural, thick, and fragile nails for men, women, and children. It is also effective for removing cuticles, hard skin, calluses, and corns, promoting healthy and well-maintained fingernails and toenails.

Informacje dotyczące bezpieczeństwa

• Trzymaj urządzenie poza zasięgiem dzieci.
• W pełni naładuj urządzenie przed pierwszym użyciem.
• Ensure the nail tip is tightly integrated with the device before operation.
• Use only the provided nail tips with the device.
• If using continuously for more than 20 minutes, allow a 5-minute cool-down period to prevent motor overheating.
• If the device does not function normally, try charging it for at least one minute.

Zawartość opakowania

Your POLAMD BSR-MJQNB kit includes the following items:

• Elektryczny gwóźdź Filer (Main Unit)
• 5 High-Quality Stainless Steel Drill Bits
• Integrated LED Light (on main unit)
• Tarcza przeciwpyłowa
• Kabel ładujący typu C.
• Instrukcja obsługi (ten dokument)

Obraz: Ponadview of the POLAMD BSR-MJQNB kit, showing the main unit, various drill bits, and charging cable.

Organizować coś

Ładowanie urządzenia

1. Connect the Type-C charging cable to the charging port at the bottom of the main unit.
2. Podłącz drugi koniec kabla USB do kompatybilnego źródła zasilania USB (np. zasilacza sieciowego, portu USB komputera).
3. The indicator light on the device will illuminate to show charging status. A full charge typically takes approximately 3 hours and provides up to 2 hours of continuous cordless operation.

Image: Close-up of the device showing the Type-C charging port and charging cable connected.

Attaching/Changing Drill Bits

1. Ensure the device is turned off before attaching or changing any drill bits.
2. Twist the desired nail tip slightly before inserting it into the unit.
3. Plug the nail tip firmly into the opening at the top of the device.
4. Ensure a tight and secure fit between the nail tip and the device to prevent excessive noise, vibration, or the tip falling off during use.

Image: Visual guide demonstrating the correct method for inserting and securing a drill bit into the device.

Instrukcja obsługi

Włączanie/wyłączanie i regulacja prędkości

• To power on the device, press the power button (usually indicated by a circle or 'O' symbol).
• The device features 5 adjustable speed options: Baby, Adult, Medium, Fast, and Strong. Press the speed button (usually indicated by 'V' or '^' symbols) to cycle through the speeds. Corresponding indicator lights will show the selected speed.
• Aby wyłączyć urządzenie, naciśnij i przytrzymaj przycisk zasilania.

Image: Diagram illustrating the speed button, LED button, power button, rotation controls, and indicator lights on the device.

Kierunek obrotu

• The nail e-file set rotates both clockwise and anti-clockwise, making it convenient for both right-handed and left-handed users. Use the directional buttons (usually indicated by arrows) to switch rotation.

Image: An animated graphic showing the drill bit rotating both clockwise and anti-clockwise, highlighting the dual rotation feature.

Światło LED

• The integrated LED light provides precise illumination for detailed nail care. Press the LED button (often integrated with the speed button or a separate button near the tip) to turn the light on or off.

Przewodnik po załącznikach

The kit includes 5 high-quality stainless steel drill bits, each designed for a specific purpose:

• Stożek szafirowy: For removing calluses on the soles of the feet and heels.
• Stożek filcowy: Suitable for smoothing and buffing nail tips after filing, and for cleaning the surface of the nail tips.
• Milling Cutter: Ideal for removing cuticles and ingrown nails.
• Sapphire Sander: For larger areas of calluses on the soles of the feet and heels.
• Fine Sapphire Disk: Suitable for filing nails to reduce length.
• Dust Shield: To collect nail dust during operation.

Image: A visual display of the different drill bits included in the kit, such as the Dust Shield, Sapphire Cone, Sapphire Callus Sander, Cylindrical Milling Cutter, Felted Cone, and Fine Sapphire Disk.

Konserwacja

Czyszczenie urządzenia i akcesoriów

• After each use, remove the drill bit and gently brush off any nail dust or debris.
• The drill bits can be cleaned with a soft cloth or a small brush. For thorough cleaning, they can be wiped with an alcohol wipe.
• Przetrzyj jednostkę główną suchą lub lekko zwilżoną szmatką.amp płótno. Nie zanurzaj urządzenia w wodzie.
• Store the device and all attachments in their designated slots in the original packaging to protect them from damage and dust.

Rozwiązywanie problemów

Device Not Turning On or Operating Normally

• Ensure the device is fully charged. Connect it to the charger for at least one minute, even if it appears to have some charge.
• Sprawdź, czy przycisk zasilania został wciśnięty prawidłowo.

Nadmierny hałas lub wibracje

• Check that the nail tip is securely and tightly inserted into the device. Improper insertion can cause instability.
• Ensure the correct nail tip is being used for the intended task.

Specyfikacje

Gwarancja i wsparcie

The POLAMD BSR-MJQNB Professional Cordless Electric Manicure Pedicure Kit comes with a 30-day money-back guarantee. For any inquiries or support, please contact customer service, available 24/7.

Filmy o produktach