VeGue VW-022N

Instrukcja obsługi systemu mikrofonów bezprzewodowych VeGue VW-022N Dual UHF

Model: VW-022N

1. Wprowadzenie

Thank you for choosing the VeGue VW-022N Dual UHF Wireless Microphone System. This system is engineered to provide stable signal transmission and high-definition sound quality for various applications, including home karaoke, parties, meetings, church events, and public speaking. This manual will guide you through the setup, operation, and maintenance of your new wireless microphone system.

2. Zawartość opakowania

Proszę sprawdzić zawartość paczki, aby upewnić się, że wszystkie przedmioty znajdują się w przesyłce i są w dobrym stanie:

  • 2 x mikrofony ręczne
  • 1 x Bezprzewodowy odbiornik
  • 2 x pierścienie antypoślizgowe
  • 2 x osłony piankowe na mikrofon
  • 1 x 6.35 mm kabel audio
  • 1 x Power Adapter (Charging Cable)
  • 1 x Instrukcja obsługi
Contents of the VeGue VW-022N wireless microphone system package, including two microphones, receiver, cables, anti-slip rings, mic covers, and manual.

Figure 2.1: Complete package contents of the VeGue VW-022N system.

3. Koniec produktuview

3.1. Jednostka odbiorcza

Szczegółowy view of the VeGue wireless microphone receiver, highlighting power button, volume controls, XLR output, 1/4 inch output, antenna connectors, and power input.

Rysunek 3.1: Przód i tył view of the receiver unit with labeled components.

  • Przycisk zasilania: Włącza lub wyłącza odbiornik.
  • Wyświetlacz LCD: Shows channel, frequency, and signal strength for both microphones.
  • Mic-A Vol Control: Adjusts the output volume for Microphone A.
  • Mic-B Vol Control: Adjusts the output volume for Microphone B.
  • Wyjście XLR: Balanced audio outputs for professional connections (XLR-A, XLR-B).
  • 1/4" (6.35mm) Output: Unbalanced audio output for mixed signal.
  • Antenna Connectors (ANT-A, ANT-B): For connecting the included antennas to ensure stable signal reception.
  • Pobór mocy: Podłączany do dostarczonego zasilacza.

3.2. Mikrofony ręczne

Szczegółowy view of a VeGue handheld wireless microphone, showing the microphone head, display screen, switch button, and frequency adjust button.

Figure 3.2: Handheld microphone with labeled components.

  • Microphone Head Section: Przechwytuje dźwięk.
  • Ekran wyświetlacza: Shows battery level and current channel/frequency.
  • Przycisk przełącznika: Włącza lub wyłącza mikrofon.
  • Frequency Adjust Button: Allows manual adjustment of the microphone's operating frequency (located inside the battery compartment).

4. Instrukcje konfiguracji

Follow these steps to set up your VeGue wireless microphone system:

  1. Podłącz odbiornik:
    • Attach the two antennas to the ANT-A and ANT-B connectors on the rear of the receiver.
    • Connect the power adapter to the DC 12V IN port on the receiver and plug it into a power outlet.
    • Connect the receiver's audio output to your audio amplifier, mixer, or PA system using either the 6.35mm audio cable (for mixed output) or XLR cables (not included, for individual microphone outputs). Ensure the receiver is connected to an appropriate audio input on your sound system.
  2. Wkładanie baterii do mikrofonów:
    • Unscrew the bottom part of each handheld microphone to access the battery compartment.
    • Insert two AA batteries (not included) into each microphone, observing the correct polarity (+/-).
    • Dokładnie przykręć dolną część.
  3. Power On and Automatic Pairing:
    • Press the power button on the receiver to turn it on. The LCD display will illuminate.
    • Press the switch button on each handheld microphone to turn them on.
    • The microphones will automatically pair with the receiver. The receiver's display will show the corresponding channel and frequency for each microphone, and the microphone displays will also show their active channel.
  4. Optimal Boot and Shutdown Order:

    To prevent unexpected noise or damage to your audio equipment, follow these recommended power sequences:

    • Kolejność rozruchu: TV → Audio Amplifier → Głośnik → Odbiornik → Mikrofon
    • Kolejność wyłączania: Mikrofon → Odbiornik → Głośnik → Audio Amplifier → TV

5. Instrukcja obsługi

5.1. Podstawowa obsługa

  • Włączanie/wyłączanie: Use the respective power buttons on the receiver and microphones.
  • Regulacja głośności: Use the 'Mic-A Vol Control' and 'Mic-B Vol Control' knobs on the receiver to adjust the individual output volume of each microphone.
  • Użycie mikrofonu: Hold the microphone approximately 2-6 inches from your mouth for optimal sound pickup. Avoid covering the microphone head with your hand.

5.2. Changing Frequencies (If Interference Occurs)

The system offers 15 adjustable frequencies to avoid interference. If you experience signal drops or interference:

  1. Turn off the affected microphone.
  2. Unscrew the bottom part of the microphone to reveal the frequency adjust button.
  3. Press the frequency adjust button briefly to cycle through available frequencies. Observe the microphone's display for the new channel.
  4. Turn the microphone back on. It should automatically pair with the receiver on the new frequency.
  5. Repeat for the other microphone if necessary, ensuring both microphones operate on different, clear channels.

6. Schematy połączeń

6.1. Connecting to TV through Amplifier with 6.35mm Mic Port

Connection diagram for VeGue wireless microphone system to a TV and home speaker through an audio amplifier using a 6.35mm cable.

Figure 6.1: Diagram for connecting the receiver to an audio amplifier with a 6.35mm mic input, then to a TV and home speaker.

Notatka: The receiver needs to be connected to professional audio equipment. Ensure you insert the 6.35mm cable plug into the "MIC" input port on the ampliyfikator.

6.2. Connecting Audio Devices with XLR Port

Connection diagram for VeGue wireless microphone system to an audio mixer and ampwzmacniacz za pomocą kabli XLR.

Figure 6.2: Diagram for connecting the receiver to an audio mixer and amplifier using XLR cables (not included).

6.3. Multi-Device Connection Support

Diagram illustrating the VeGue wireless microphone system's compatibility with various audio devices like karaoke machines, PA systems, mixers, and ampwężownice.

Figure 6.3: The system supports connection to various devices including karaoke machines, PA systems, mixers, and ampwężownice.

7. Konserwacja

Proper maintenance ensures the longevity and optimal performance of your microphone system:

  • Czyszczenie: Use a soft, dry cloth to clean the receiver and microphones. Avoid using liquid cleaners or solvents.
  • Pielęgnacja baterii: Remove batteries from the microphones if they will not be used for an extended period to prevent leakage.
  • Składowanie: Przechowuj system w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
  • Obsługiwanie: Unikaj upuszczania mikrofonów i odbiorników, gdyż może to spowodować ich wewnętrzne uszkodzenia.

8. Rozwiązywanie Problemów

If you encounter issues with your VeGue wireless microphone system, refer to the following troubleshooting guide:

ProblemMożliwa przyczynaRozwiązanie
Brak dźwięku z mikrofonówMicrophone or receiver not powered on; Low microphone battery; Incorrect audio cable connection; Receiver volume too low; Amplifier/mixer input not selected or volume too low.Ensure all devices are powered on. Replace microphone batteries. Check all audio cable connections. Increase receiver volume. Verify amplifier/mixer settings.
Zakłócenia lub szum statycznyOther wireless devices operating on the same frequency; Obstacles blocking signal; Distance too far from receiver.Change the microphone's operating frequency (refer to Section 5.2). Reduce distance between microphone and receiver. Ensure clear line of sight. Avoid placing receiver near other electronic devices.
Mikrofon nie łączy się z odbiornikiemMicrophone or receiver not powered on; Batteries low; Frequency mismatch.Ensure both are powered on. Replace batteries. Try manually changing the microphone's frequency to allow re-pairing.
Krótki zasięg bezprzewodowyAntennas not properly connected or positioned; Environmental interference; Physical obstructions.Ensure antennas are securely connected and oriented upwards. Minimize obstructions between microphones and receiver.

9. Specyfikacje

FunkcjaSpecyfikacja
Nazwa modeluVW-022N
Technologia łącznościUHF
Współczynnik kształtu mikrofonuRęczny
TworzywoMetal
Liczba kanałów15
Czułość audio105 decybeli
Stosunek sygnału do szumu105dB
Źródło zasilaniaCorded Electric (Receiver)
Waga przedmiotu3.65 funta (system)
Wymiary opakowania11.54 x 8.03 x 4.76 cala
UPC798845803367
Zalecane zastosowaniaKaraoke, Singing, Meetings, Public Speaking
Kompatybilne urządzeniaKaraoke Machine, Amplifier, Mixer, PA System

10. Gwarancja i wsparcie

The VeGue VW-022N Dual UHF Wireless Microphone System comes with a 2-letnia gwarancja Gwarancja obowiązuje od daty zakupu i obejmuje wady produkcyjne. Prosimy zachować dowód zakupu na wypadek roszczeń gwarancyjnych.

For technical support, troubleshooting assistance, or warranty inquiries, please contact VeGue customer service through the retailer where you purchased the product or visit the official VeGue webwitryna do informacji kontaktowych.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.