Instrukcja obsługi kamery samochodowej IROAD NX7

1. Wprowadzenie

Thank you for choosing the IROAD NX7 Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera. The IROAD NX7 is a high-performance 2-channel dash cam featuring Full HD 1080P recording for both front and rear cameras, a 3-inch touch panel display, 24-hour parking surveillance with motion and impact detection, and advanced driving assistance systems (ADAS).

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie poniższe elementy:

• IROAD NX7 Front Dash Cam Unit
• Kamera tylna
• Kabel połączeniowy kamery tylnej
• OBDⅡ Power Cable (for general and hybrid vehicles)
• Karta MicroSD 16 GB
• Instrukcja obsługi (ten dokument)
• Mocowania samoprzylepne

3. Koniec produktuview

Familiarize yourself with the components and ports of your IROAD NX7 Dash Cam.

Rysunek 3.1: The IROAD NX7 main dash cam unit and its accompanying rear camera, showcasing ich zwartej konstrukcji.

Rysunek 3.2: IROAD NX7 Front and Rear Dash Cam with labeled components. The image shows the front camera with its lens, security LED, and operation LED. The rear camera is also shown. Various ports are labeled: DC-IN power terminal, GPS terminal, rear camera terminal, memory card slot, power switch, and bracket.

Rysunek 3.3: Od góry do dołu view of the IROAD NX7 dash cam and its rear camera, highlighting their sleek design.

• Obiektyw aparatu: Przechwytuje wideo footage.
• Dioda bezpieczeństwa: Indicates security recording status.
• Dioda działania: Indicates device operation status.
• Nawias: Used for mounting the dash cam.
• DC-IN Power Terminal: Podłącza się do kabla zasilającego.
• GPS Terminal: Do podłączenia zewnętrznego modułu GPS (jeśli dotyczy).
• Gniazdo karty pamięci: Insert the MicroSD card here.
• Przycisk zasilania: Włącza/wyłącza urządzenie.
• Front Terminal: Connection point for the front camera (if separate).
• Rear Camera Terminal: Umożliwia podłączenie tylnej kamery.

4. Konfiguracja i instalacja

4.1 Przygotowanie karty MicroSD

1. Before first use, it is recommended to format the included 16GB MicroSD card using the IROAD PC Viewer software or directly on the device via the touch screen menu.
2. Insert the MicroSD card into the memory card slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.

4.2 Montaż kamery samochodowej

The IROAD NX7 uses an adhesive mounting method for secure attachment.

1. Choose an optimal location on your windshield, typically behind the rearview lustro, upewniając się, że nie zasłania ono view.
2. Dokładnie oczyść wybrany obszar na szybie przedniej, aby zapewnić odpowiednią przyczepność.
3. Attach the adhesive mount to the dash cam bracket.
4. Peel off the protective film from the adhesive pad and firmly press the dash cam with the mount onto the cleaned windshield area for at least 30 seconds.
5. Repeat the process for the rear camera, mounting it on the rear windshield.

4.3 Podłączanie zasilania

The IROAD NX7 comes with an OBDⅡ power cable for easy and reliable power supply.

1. Locate your vehicle's OBDⅡ port (usually under the dashboard on the driver's side).
2. Connect the OBDⅡ power cable to the OBDⅡ port.
3. Connect the other end of the OBDⅡ power cable to the DC-IN Power Terminal on the IROAD NX7 front dash cam.
4. Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
5. Connect the rear camera to the front unit using the provided rear camera connection cable.

5. Instrukcja obsługi

5.1 Włączanie/wyłączanie

• The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on, provided it is connected via the OBDⅡ power cable.
• To manually power off, press and hold the Power Switch until the device shuts down.

5.2 Podstawowe tryby nagrywania

The IROAD NX7 supports continuous recording, event recording, and parking surveillance recording.

• Ciągłe nagrywanie: Uruchamia się automatycznie po włączeniu pojazdu.tage is recorded in 1-minute segments and saved to the MicroSD card.
• Event Recording (Impact Recording): In case of a sudden impact or collision, the G-sensor triggers an event recording, saving the footage separately to prevent overwriting.
• Loop Recording (Overwrite Recording): When the MicroSD card is full, the oldest continuous recording files are automatically overwritten to make space for new recordings. Event recordings are protected from overwriting.

5.3 Tryb monitorowania parkingu

The IROAD NX7 offers 24-hour parking surveillance with advanced features:

• Detekcja ruchu: The dash cam detects motion around the vehicle and automatically records footage.
• Wykrywanie uderzeń: If an impact is detected while parked, the device records and saves the event footage.
• Time-lapse & Hyperlapse: For extended parking surveillance, the dash cam can record in time-lapse mode, compressing long periods into shorter videos, saving storage space.
• Battery Over-discharge Prevention: The dash cam monitors your vehicle's battery voltage and automatically cuts off power if the voltage drops below a set threshold, preventing battery drain.

5.4 Touch Panel Operation

The 3-inch touch panel allows for easy navigation and settings adjustment.

• Tap icons to access menus such as Live View, Playback, Settings, and File Kierownictwo.
• Swipe to navigate through recorded files.
• Adjust settings like recording resolution, G-sensor sensitivity, parking mode options, and time/date.

5.5 Advanced Driving Assistance Systems (ADAS)

The IROAD NX7 includes ADAS features to enhance driving safety:

• LDWS (system ostrzegania o opuszczeniu pasa ruchu): Ostrzega Cię, gdy Twój pojazd zjeżdża z pasa ruchu.
• FCWS (system ostrzegania przed kolizją): Ostrzega przed niebezpieczeństwem zderzenia z pojazdem znajdującym się przed Tobą.
• FVDW (ostrzeżenie o odjechaniu pojazdu z przodu): Notifies you when the vehicle in front starts moving from a standstill.

Note: ADAS features are supplementary and should not replace safe driving practices.

Kompatybilność z lampką sygnalizacyjną LED 5.6

The IROAD NX7 is designed to record clearly even when facing LED traffic signals, minimizing flicker and ensuring reliable footage.

6. Konserwacja

6.1 Zarządzanie kartami MicroSD

• Regularly format the MicroSD card (at least once a month) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings or the IROAD PC Vieweee.
• Use only high-quality, genuine MicroSD cards recommended by IROAD.
• Replace the MicroSD card every 6-12 months, depending on usage, as flash memory has a limited lifespan.

6.2 Czyszczenie urządzenia

• Wipe the camera lenses and the device body with a soft, dry, lint-free cloth.
• Nie należy używać środków czyszczących ani materiałów ściernych, gdyż mogą one uszkodzić urządzenie.
• Przed czyszczeniem upewnij się, że urządzenie jest wyłączone.

7. Rozwiązywanie Problemów

8. Specyfikacje

9. Gwarancja i wsparcie

For warranty information and technical support, please refer to the warranty card included with your product or visit the official IROAD webZachowaj paragon jako dowód zakupu na wypadek reklamacji.

For further assistance, you may contact IROAD customer service through their official channels.