Instrukcja obsługi kamery samochodowej IROAD NX7

Wstęp

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

• IROAD NX7 Main Unit (Front Camera)
• Kamera tylna
• Kabel połączeniowy kamery tylnej
• OBD-II Power Cable (for general and hybrid vehicles)
• Karta MicroSD 16 GB
• Instrukcja obsługi (ten dokument)
• Mocowania samoprzylepne
• Kabel ładujący
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Produkt ponadview

Zapoznaj się z komponentami i ich funkcjami.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Przedni obiektyw aparatu: Rejestruje view through the front windshield.
• Dioda bezpieczeństwa: Indicates recording status and acts as a security deterrent.
• Dioda działania: Shows the device's operational status.
• 3-inch Touch Panel Display: Dla viewna żywotage, playback, and accessing settings.
• Gniazdo kart microSD: Insert the provided MicroSD card for video storage.
• Przycisk zasilania: Aby włączyć lub wyłączyć urządzenie.
• DC-IN Power Terminal: Podłącza się do kabla zasilającego.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Kamera tylna

• Tylny obiektyw aparatu: Rejestruje view through the rear windshield.
• Dioda działania: Indicates the rear camera's operational status.

Organizować coś

1. Wkładanie karty MicroSD

1. Sprawdź, czy kamera samochodowa jest wyłączona.
2. Znajdź gniazdo karty MicroSD z boku jednostki głównej.
3. Włóż dołączoną kartę MicroSD o pojemności 16 GB do gniazda, aż zatrzaśnie się na miejscu. Upewnij się, że jest prawidłowo ułożona.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Instalacja tylnej kamery

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Znajdź port OBD-II swojego pojazdu (zazwyczaj znajduje się pod deską rozdzielczą, po stronie kierowcy).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Poprowadź kabel zasilający w taki sposób, aby nie kolidował z elementami sterowania pojazdu.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Zamontuj antenę GPS w miejscu z wolnym dostępem view of the sky, typically on the dashboard or near the windshield.

Instrukcja obsługi

Włączanie/wyłączanie

• Włączanie: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Wyłączone: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Tryby nagrywania

The IROAD NX7 supports various recording modes:

• Ciągłe nagrywanie: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, zapobiegając jego nadpisaniu.
• Parking Surveillance (24-hour Recording):
  • Detekcja ruchu: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Obsługa panelu dotykowego

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

ViewNagrania

• Na urządzeniu: Access the playback menu on the touch screen to view nagrane filmy bezpośrednio.
• Na komputerze: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webstrona) do view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Konserwacja

Zarządzanie kartami MicroSD

• Formatowanie standardowe: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer oprogramowania.
• Żywotność karty: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Czyszczenie urządzenia

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników, gdyż mogą one uszkodzić urządzenie.
• Ensure the lenses are clean and free of smudges for clear video quality.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.