Wstęp
Thank you for choosing the BLS T36-3 36 LED Closet Light. This super bright, battery-powered under cabinet lighting solution is designed to enhance visibility and convenience in various indoor spaces. Featuring a motion sensor and a 1500mAh rechargeable battery, these wireless lights offer efficient and flexible illumination.
- 36 superjasnych diod LED: Provides 180 Lumens of 5500K Daylight White light, ideal for closets, cabinets, kitchens, and more.
- Ultra-Long Battery Run Time: Equipped with a 1500mAh rechargeable battery, offering up to 120 days of use (based on 10 uses/day, 20 seconds/use).
- Reliable Motion Sensor with 2 Modes: Features ON/OFF/AUTO NIGHT/AUTO DAY & NIGHT modes. BLS Constant-Sense technology ensures the light stays on as long as motion is detected, turning off 15 seconds after inactivity.
- Instalacja bezprzewodowa: Built-in strong magnets allow for easy attachment to metal surfaces or use with provided 3M adhesive magnetic plates for non-metal surfaces.
- Szerokie zastosowanie: Suitable for various indoor locations including wardrobes, attics, basements, drawers, garages, and vanity mirrors.
Instrukcje konfiguracji
- Naładuj światła: Before first use, fully charge each LED light using the provided USB charging cable. The charging port is located on the side of the light. A red indicator light typically signifies charging, turning green or off when fully charged.
- Przygotuj powierzchnię montażową: Upewnij się, że powierzchnia, na której chcesz dokonać instalacji jest czysta, sucha i gładka.
- Attach Magnetic Plates (for non-metal surfaces):
- Peel off the protective film from one side of the 3M adhesive on the magnetic plate.
- Firmly press the adhesive side of the magnetic plate onto the desired installation location.
- Repeat for all lights.
- Zamontuj światła:
- If installing on a metal surface, simply attach the light directly as it has a built-in strong magnet.
- If using magnetic plates, align the magnets on the back of the LED light with the installed magnetic plates and gently attach. The lights are easily detachable for recharging.
Instrukcja obsługi
The BLS T36-3 LED Closet Light features a slide switch with multiple operating modes:
- OFF: Power off the light.
- AUTO NOC (ikona księżyca): Motion sensor mode. The light will only turn on when it detects motion in dark or very dim conditions. Ideal for bedrooms, hallways, or basements at night.
- AUTO DAY & NIGHT (Sun Icon): Motion sensor mode. The light will turn on when it detects motion, regardless of ambient light conditions (day or night). Suitable for closets, cabinets, or under-cabinet lighting where light is needed at all times.
- NA: The light remains continuously on, regardless of motion or ambient light.
The BLS Constant-Sense technology ensures the light stays illuminated as long as motion is detected nearby, automatically turning off approximately 15 seconds after motion ceases.
Konserwacja
- Ładowanie: When the light dims or stops responding, it indicates a low battery. Detach the light from its mounting, connect the provided USB cable to the charging port, and plug it into a USB power source. A red indicator light typically signifies charging, turning green or off when fully charged.
- Czyszczenie: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish or electronic components.
- Składowanie: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place. Recharge periodically to maintain battery health.
Charging Demonstration Video
Video: A demonstration on how to charge the BLS LED Closet Light using the provided USB cable. This video shows the charging port and indicator light behavior.
Battery Life Information Video
Video: This video highlights the 1500mAh rechargeable battery and its extended run time of up to 120 days, demonstrating the product's efficiency.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Światło się nie włącza. | Niski poziom naładowania baterii. Incorrect mode setting. Insufficient darkness (in AUTO NIGHT mode). | Naładuj lampę całkowicie. Check the slide switch and ensure it's set to ON, AUTO NIGHT, or AUTO DAY & NIGHT. Test in a darker environment or switch to AUTO DAY & NIGHT mode. |
| Czujnik ruchu nie działa. | Incorrect mode setting. Czujnik jest zasłonięty. Ambient light too bright (in AUTO NIGHT mode). | Ensure the switch is set to AUTO NIGHT or AUTO DAY & NIGHT. Usuń wszelkie przeszkody blokujące czujnik. Test in a darker area or switch to AUTO DAY & NIGHT. |
| Light falls off mounting surface. | Adhesive not strong enough or surface not clean. Magnetic plates not properly secured. | Clean the surface thoroughly before applying adhesive. Use new 3M adhesive strips if necessary. Consider using screws for more permanent installation if the surface allows. |
| Krótki czas pracy baterii. | Frequent activation. Continuous ON mode usage. Degradacja baterii w miarę upływu czasu. | Optimize mode setting (e.g., use AUTO NIGHT in dark areas). Avoid prolonged use in ON mode. Ensure full charge cycles. If battery life remains significantly short, contact support. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | BLS |
| Nazwa modelu | 36 LED Closet Lights (T36-3) |
| Temperatura barwowa | 5500 K białe światło dzienne |
| Liczba diod LED | 36 |
| Jasność | 180 lumenów |
| Źródło zasilania | 1500mAh Rechargeable Lithium Ion Battery (included) |
| Cotage | 3 watów |
| Tworzywo | Akrylonitryl-butadien-styren, aluminium |
| Wymiary produktu | 8.9" dł. x 1.4" szer. x 0.6" wys. |
| Waga przedmiotu | 0.42 kilograma (14.8 uncji) |
| Typ instalacji | Wall Mount / Under Cabinet (Magnetic with 3M adhesive) |
| Funkcja specjalna | 3-way switching, Motion Sensor, Instant On |
| Metoda kontroli | Przełącznik suwakowy |
| Zastosowanie wewnątrz/na zewnątrz | Wnętrz |
| Poziom wodoodporności | Waterproof (Note: Typically means splash-proof, not submersible) |
Informacje o gwarancji
BLS offers an 18-month warranty for this product. To register for your free extended warranty, please scan the QR code provided on the product packaging or contact customer support.
Obsługa klienta
For any support needs, questions, or concerns regarding your BLS T36-3 LED Closet Light, please contact us via email: