1. Wprowadzenie
Dziękujemy za zakupasing the LVYUAN Automatic Pulse Battery Charger DC200PLUS. This charger is designed for 12V and 24V lead-acid batteries, including open-type, sealed-type, and AGM/GEL batteries. It features automatic charging, pulse charging, trickle charging, and battery diagnosis functions, ensuring efficient and safe battery maintenance. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Informacje dotyczące bezpieczeństwa
- Do not use for lithium batteries. This charger is specifically designed for lead-acid batteries.
- Podczas ładowania należy zapewnić odpowiednią wentylację.
- Podczas ładowania akumulatora należy unikać iskier i otwartego ognia.
- Podczas obsługi baterii należy nosić okulary ochronne i rękawice.
- Przechowywać w miejscu niedostępnym dla dzieci.
- The charger is equipped with multiple protection functions including short circuit protection, reverse connection protection, overheat protection, undervoltage ochrona, przepięcietage protection, overcharge protection, and leakage prevention.
- If the charging clips are connected in reverse, an error will be displayed.
- Before using the repair mode, always remove the battery from the vehicle to prevent current flow to the vehicle's wiring.
3. Koniec produktuview
The LVYUAN DC200PLUS is an intelligent battery charger that automatically detects battery type and condition, then selects the optimal charging method. It features a clear digital LCD display for monitoring charging status, current, voltage i procent bateriitage. A built-in cooling fan helps regulate temperature during operation.
The digital display provides real-time information on charging status, current, voltage i typ baterii.
The charger includes a cooling fan for temperature regulation and various safety features.
4. Konfiguracja
- Connect Battery Clips: Connect the red charging clip to the positive (+) terminal of the battery and the black charging clip to the negative (-) terminal. Ensure a secure connection.
- Podłącz do gniazdka prądu zmiennego: Insert the charger's power plug into a standard AC100V electrical outlet.
- Włącz zasilanie: Locate the power switch on the back of the charger and turn it to the 'ON' position. The display will light up, indicating the charger is ready.
Follow these steps for a simple and safe charging connection.
Official product video demonstrating the LVYUAN DC200PLUS Automatic Pulse Battery Charger in use, showing connection, mode selection, and charging process.
5. Instrukcja obsługi
5.1 Ładowanie automatyczne
The charger automatically detects the battery's voltage (12V or 24V) and condition. It then selects the most appropriate charging current and method.
The charger automatically selects the optimal charging method for your battery.
5.2 Current Selection
For 12V batteries, you can select charging currents of 5A, 10A, or 20A. For 24V batteries, you can select 5A or 10A. Press the 'Current Selection' button to cycle through the available options. Once charging begins, the current cannot be changed. If an incorrect current is selected, turn off the power and restart the selection process.
Select from 5A, 10A, or 20A charging currents depending on your battery's capacity.
5.3 Start/Stop Charging
Press the 'Start/Stop' button to begin or pause the charging process. The charger will automatically stop when the battery reaches a full charge state. If the battery voltage drops below a certain threshold due to self-discharge, the charger will automatically resume charging.
5.4 Repair Mode (Pulse Charging)
The repair mode is designed to revitalize degraded lead-acid batteries by removing sulfation. This mode is only effective for 12V lead-acid batteries; it cannot repair 24V batteries.
- Aktywacja: Long-press the 'Repair Mode' button for 5 seconds to activate.
- Ważny: Before activating repair mode, always disconnect the battery from the vehicle. Failure to do so may result in current flowing through the vehicle's wiring, preventing effective repair.
- Repair mode runs for 24 hours. If the battery is not repaired after 24 hours, restart the charger and repeat the repair mode.
- Monitor battery temperature during repair mode. If the temperature becomes too high, pause the repair process.
The repair mode can help restore degraded lead-acid batteries.
6. Konserwacja
- Utrzymuj ładowarkę w czystości i suchości.
- Regularly check the charging clips and cables for any damage.
- Jeśli nie używasz ładowarki, przechowuj ją w chłodnym i suchym miejscu.
7. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Ładowarka się nie włącza | No power from AC outlet, power switch off | Check AC outlet, ensure power switch is ON |
| Error displayed (e.g., reverse connection) | Incorrect battery connection | Disconnect clips and reconnect correctly (red to +, black to -) |
| Bateria się nie ładuje | Battery is faulty or too degraded (0V battery) | If battery is 0V, try repair mode after disconnecting from vehicle. If still not charging, battery may be beyond repair. |
| Repair mode ineffective | Battery too degraded, or not disconnected from vehicle | Ensure battery is removed from vehicle. Repeat repair mode if necessary. Battery may be beyond repair. |
| Ładowarka się przegrzewa | Poor ventilation, prolonged use in high temperatures | Ensure adequate ventilation. Pause charging if necessary. |
8. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Marka | LVYUAN |
| Model | DC200PLUS |
| Wejście Voltage | prąd zmienny 100 V |
| Prąd wyjściowy | 20A (max during charging) |
| Kompatybilne baterie | DC12V/DC24V Lead-Acid (Open, Sealed, AGM, GEL) |
| Kompatybilna pojemność baterii | 20Ah ~ 200Ah |
| Napięcie wyjściowe 12 Vtage/Bieżący | DC12V/20A (max current), 14.4V (STANDARD)/14.8V (AGM) |
| Napięcie wyjściowe 24 Vtage/Bieżący | 24V/10A (max current), 28.8V (STANDARD)/29.6V (AGM) |
| Wybór prądu ładowania | 12V: 5A, 10A, 20A; 24V: 5A, 10A |
| Funkcje ładowania | Automatic, Pulse, Trickle (Maintenance), Battery Diagnosis |
| Funkcje ochronne | Reverse connection, Faulty battery, Voltage confirmation, Overcurrent, High temperature, Time over, Short circuit, Undervoltage, Overvoltage, Overcharge, Leakage prevention |
| Wymiary (gł. x szer. x wys.) | Wymiary 12 x 16 x 5 cm |
| Waga | 1.6 kilogramów |
| UPC | 782905972315 |
9. Gwarancja i wsparcie
Ten produkt jest dostarczany z 6 Month Warranty Against Manufacturer Defects. For support or warranty claims, please contact your retailer or the manufacturer directly with your purchase details.