1. Wprowadzenie
The Airthereal APH320 WiFi Air Purifier is designed to improve indoor air quality by effectively removing airborne particles and pollutants. Featuring an H13 True HEPA filter, UV-C light, and Anion function, it targets dust, pollen, smoke, odors, mold spores, and pet dander. Its smart auto mode and WiFi connectivity offer convenient control and monitoring of your environment.
2. Instrukcje bezpieczeństwa
- Przeczytaj wszystkie instrukcje przed uruchomieniem urządzenia.
- Upewnij się, że napięcie zasilaniatage matches the specifications on the product label.
- Do not operate the air purifier near water or in excessively humid environments.
- Trzymaj urządzenie z dala od dzieci i zwierząt domowych.
- Nie blokuj wlotów ani wylotów powietrza. Zachowaj co najmniej 15 cm (6 cali) odstępu od ścian i mebli.
- Unplug the air purifier from the power outlet before cleaning, maintenance, or filter replacement.
- Nie próbuj samodzielnie naprawiać ani demontować urządzenia. Skontaktuj się z obsługą klienta, aby uzyskać pomoc.
3. Zawartość opakowania
- Airthereal APH320 WiFi Air Purifier
- H13 True HEPA Filter (pre-installed or separate)
- Instrukcja obsługi
4. Koniec produktuview
Główne cechy
- WIFI ENABLED: Control the air purifier remotely using the Airia app on your smartphone. Monitor air quality, adjust settings, and schedule operations from anywhere.
- WYSOKA WYDAJNOŚĆ: With a CADR of 188 CFM (320 m³/h), it effectively cleans rooms up to 435 sq ft in 15 minutes or 800 sq ft in 30 minutes.
- H13 TRUE HEPA FILTRATION: Captures 99.97% of fine airborne particles as small as 0.1 microns, including dust, pollen, smoke, odors, mold spores, and pet dander.
- UV-C FUNCTION: Neutralizes airborne pollutants, germs, and viruses. CARB certified.
- ANION FUNCTION: Accelerates the trapping of airborne dust, pollen, and smoke.
- SMART AUTO MODE: Automatically detects current air quality and adjusts fan speed accordingly for optimal purification.
- QUIET SLEEP MODE: Operates at a low noise level (22 dB) with dimmed lights for undisturbed rest.
Komponenty


5. Konfiguracja
5.1 Unboxing and Filter Preparation
- Ostrożnie wyjmij oczyszczacz powietrza z opakowania.
- Locate the filter compartment, typically on the side or back of the unit.
- Open the filter cover and remove the H13 True HEPA filter.
- Remove any plastic packaging from the filter. The filter must be unwrapped before use.
- Insert the unwrapped filter back into the compartment, ensuring it is seated correctly.
- Zamknij dokładnie pokrywę filtra.

5.2 Umiejscowienie i podłączenie zasilania
- Ustaw oczyszczacz powietrza na stabilnej, równej powierzchni.
- Ensure there is adequate space around the unit for proper airflow (at least 15 cm / 6 inches from walls or furniture).
- Podłącz przewód zasilający do odpowiedniego gniazdka elektrycznego.
6. Instrukcja obsługi
6.1 Funkcje panelu sterowania
The control panel on top of the unit allows for direct operation:
- Przycisk zasilania: Włącza lub wyłącza urządzenie.
- Przycisk prędkości wentylatora: Cycles through fan speeds (1, 2, 3) or auto mode.
- Przycisk timera: Sets the operating time (e.g., 1, 2, 4, 8 hours).
- Przycisk trybu uśpienia: Activates sleep mode, dimming lights and setting the fan to the lowest speed for quiet operation.
- UV-C Button: Turns the UV-C light on or off to neutralize airborne germs.
- Przycisk Anion: Activates the Anion function to enhance particle trapping.
- Tryb Smart Auto: The unit automatically detects air quality and adjusts fan speed.


6.2 App Control (WiFi Enabled)
The Airthereal APH320 can be controlled via the Airia smartphone app:
- Download the "Airia" app from your device's app store.
- Postępuj zgodnie z instrukcjami w aplikacji, aby połączyć oczyszczacz powietrza z domową siecią Wi-Fi.
- Po nawiązaniu połączenia możesz używać aplikacji do:
- Włącz/wyłącz oczyszczacz powietrza.
- Dostosuj prędkość wentylatora.
- Activate/deactivate UV-C and Anion functions.
- Set schedules for operation.
- Monitoruj jakość powietrza w czasie rzeczywistym.
- Check filter life.

7. Konserwacja
7.1 Wymiana filtra
The filter should be replaced when the red "PM 2.5" light on the control panel blinks, typically every 6-8 months depending on usage and air quality.
- Odłącz oczyszczacz powietrza od gniazdka elektrycznego.
- Gently pull the front cover to remove it.
- Wyjmij stary filtr, wyciągając go.
- Insert a new H13 True HEPA filter into the compartment. Ensure it fits snugly.
- Załóż ponownie przednią pokrywę.
- Podłącz ponownie oczyszczacz powietrza.
- To reset the filter indicator, press and hold the Fan Speed button and the Timer button simultaneously for a few seconds until the red light stops blinking.
7.2 Czyszczenie
- Wytrzyj zewnętrzną część urządzenia miękką, suchą ściereczką.
- The pre-filter (outer layer of the main filter) can be gently wiped with a damp cloth to remove larger dust particles between replacements. Ensure it is completely dry before reinserting.
- Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
8. Rozwiązywanie Problemów
If you encounter issues with your Airthereal APH320, please refer to the following common solutions:
- Urządzenie nie włącza się: Check if the power cord is securely plugged into a working outlet. Ensure the filter cover is properly closed.
- Słabe oczyszczanie powietrza: Verify that the filter's plastic packaging has been removed. Check if the filter needs replacement (blinking PM 2.5 light). Ensure air inlets and outlets are not obstructed.
- Niezwykły dźwięk: Check for any foreign objects inside the unit or if the filter is incorrectly installed.
- Problemy z łącznością aplikacji: Ensure your air purifier is within range of your WiFi router. Restart both the air purifier and your smartphone. Re-pair the device with the app if necessary.
For further assistance, please contact Airthereal customer support.
9. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Numer modelu | APH320 |
| Wymiary produktu | 6.7 x 13 x 21.2 cala |
| Waga przedmiotu | 10 funtów |
| Źródło zasilania | AC |
| Metoda kontroli | Aplikacja, panel dotykowy |
| Typ filtra | H13 Prawdziwa HEPA |
| Pokrycie powierzchni podłogi | Do 800 stóp kwadratowych |
| Poziom hałasu | 22 decybeli (tryb uśpienia) |
| Rozmiar retencji cząstek | 0.1 mikronów |
| Cechy specjalne | Anion Function, H13 HEPA, Smart Auto Mode, UV-C Function |
| Zgodność z inteligentnym domem | Smart Home Compatible |
| Specyfikacja Met | Certyfikat CARB |
| Kolor | Modern Grey |
| UPC | 816621023591 |
10. Gwarancja i wsparcie
The Airthereal APH320 WiFi Air Purifier comes with a manufacturer's warranty for 2 years from the day of purchase.
For warranty claims, technical support, or any inquiries, please visit the official Airthereal webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.