Amazon Basics CLL-002

Amazon Basics Class II Cross-Line Laser Level

Model: CLL-002 | Brand: Amazon Basics

Wstęp

This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.

Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: PRODUKT LASEROWY KLASY II

This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.

  • Zawsze należy obsługiwać poziomnicę laserową w sposób bezpieczny.
  • Nie próbuj modyfikować ani demontować urządzenia.
  • Przechowywać w miejscu niedostępnym dla dzieci.
  • Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.

Zawartość opakowania

  • Amazon Basics Class II Cross-Line Laser Level
  • L-shaped Magnetic Pivoting Base
  • Torba transportowa
  • Instrukcja obsługi
Amazon Basics Cross-Line Laser Level with L-shaped magnetic base and carrying pouch
The Amazon Basics Cross-Line Laser Level, shown with its L-shaped magnetic pivoting base and a black carrying pouch.

Produkt ponadview

The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.

Główne cechy:

  • Projects horizontal, vertical, and cross-line green laser beams.
  • 59-foot (708 inch) range for indoor and outdoor applications.
  • Automatic self-leveling mode for quick and accurate setup.
  • Manual mode for locking the laser at desired angles.
  • Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
  • Battery-operated (AA batteries, not included).
Z powrotem view of the Amazon Basics Cross-Line Laser Level showing product information label and battery compartment
Tył view of the laser level, displaying the product label and the battery compartment latch.
Dimensions of the Amazon Basics Cross-Line Laser Level: 2.8 inches L x 2.4 inches W x 3.3 inches H
Diagram illustrating the compact dimensions of the laser level: 2.8 inches (7.1 cm) length, 2.4 inches (6.1 cm) width, and 3.3 inches (8.3 cm) height.

Organizować coś

1. Instalacja baterii

  1. Locate the battery compartment on the bottom of the laser level.
  2. Otwórz pokrywę komory baterii.
  3. Włóż dwie baterie AA (nie ma ich w zestawie), zwracając uwagę na prawidłową biegunowość (+/-).
  4. Dokładnie zamknij pokrywę komory baterii.

2. Montaż urządzenia

The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).

Amazon Basics Cross-Line Laser Level with L-shaped magnetic base attached
The laser level with the L-shaped magnetic pivoting base attached to its bottom, ready for use.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.

2. Automatic (Self-Leveling) Mode

When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.

Illustration of the laser level in automatic mode, projecting a level cross-line on a wall with a picture frame
In Automatic mode, the laser level self-levels to project accurate horizontal and vertical lines, ideal for hanging items like picture frames.

3. Tryb ręczny

To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.

Illustration of the laser level in manual mode, projecting an angled cross-line on a staircase
In Manual mode, the laser level can project lines at any desired angle, useful for tasks like installing stair railings.

4. Laser Line Selection

Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).

A green cross-line laser projected onto a wooden surface, with a hand marking a point
The laser level projecting a clear green cross-line onto a wooden surface, demonstrating its use for precise marking.
A person kneeling, using the laser level to project a horizontal green line on a wall during construction
A user demonstrating the laser level's application in a construction setting, projecting a horizontal line for alignment.

Konserwacja

  • Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
  • Store the device in its carrying pouch in a cool, dry place when not in use.
  • Aby zapobiec wyciekowi baterii, wyjmij je, jeśli urządzenie nie będzie używane przez dłuższy czas.
  • Nie zanurzaj urządzenia w wodzie ani nie wystawiaj go na działanie ekstremalnych temperatur.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Laser lines are blinking.In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal.In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode.
Brak linii laserowych.Batteries are dead or incorrectly installed. Device is off.Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position.
Linie laserowe są słabe.Low battery power. Bright ambient light.Replace batteries. Use the laser level in areas with less ambient light for better visibility.

Specyfikacje

  • Marka: Podstawy Amazon
  • Numer modelu: CLL-002
  • Klasa laserowa: Klasa II
  • Typ lasera: Green Cross-Line Laser
  • Zakres: 59 stopa / 708 cali
  • Zakres samopoziomowania: ±4 stopni
  • Tworzywo: 70% plastik, 30% metal
  • Kolor: Żółty/Czarny
  • Źródło zasilania: 2 baterie AA (brak w zestawie)
  • Wymiary produktu: 2.8" dł. x 2.4" szer. x 3.3" wys.
  • Waga przedmiotu: 12 uncji (0.34 kilograma)
  • Tryb działania: Automatyczny / Manualny

Gwarancja i wsparcie

For warranty information or customer support, please refer to the Amazon Basics official webOdwiedź witrynę lub skontaktuj się bezpośrednio z obsługą klienta Amazon. Zachowaj paragon zakupu na wypadek reklamacji.

© 2026 Amazon Basics. Wszelkie prawa zastrzeżone.