Enttec OCTO Mk2 71521 8 Universe DIN Rail eDMX to LED Pixel Converter & Controller User Manual

1. Wprowadzenie

The Enttec OCTO Mk2 (model 71521) is a robust and reliable 8-universe, dual-output eDMX to LED pixel data converter designed for installation-grade projects. This smart controller connects directly to LED lights and supports various eDMX protocols including Art-Net, sACN, ESP, and KiNet. It is compatible with most SPI LED strips and offers features like standalone FX mode, Overdrive Mode for increased universe output, and an intuitive web interfejs do konfiguracji.

2. Informacje dotyczące bezpieczeństwa

• Ensure the device is installed by qualified personnel in accordance with local electrical codes.
• Use only the specified power supply (DC 4-60V, 5W max) to prevent damage.
• Nie wystawiaj urządzenia na działanie wilgoci, ekstremalnych temperatur ani środowiska powodującego korozję.
• Przed przystąpieniem do wykonywania jakichkolwiek podłączeń lub prac konserwacyjnych należy odłączyć zasilanie.
• Urządzenie przeznaczone jest wyłącznie do użytku w pomieszczeniach.

3. Zawartość opakowania

The Enttec OCTO Mk2 package typically includes:

• Enttec OCTO Mk2 Unit
• Power Supply (with universal connectors)
• Kabel Ethernet
• Szybki przewodnik (nie jest zawarty w niniejszej instrukcji cyfrowej)

4. Koniec produktuview

The OCTO Mk2 features a compact 4-module DIN-rail form factor with dual pixel outputs. It includes an Identify/Reset button for wiring verification and flexible mounting options.

4.1. Przód View

Rycina 1: Przód view of the Enttec OCTO Mk2, highlighting the status LEDs for Power, Data RX, Data TX, and IP connection, along with the Identify button.

4.2. Tył View (Mounting and Ethernet Ports)

Rysunek 2: Tył view of the Enttec OCTO Mk2, illustrating the DIN rail mounting clip and the Ethernet IN and THROUGH ports.

4.3. Ethernet Ports Detail

Rysunek 3: Szczegółowy view of the Ethernet 10/100 IN and THROUGH ports, along with the Reset/Identify button.

4.4. Power and Output Terminals

Figure 4: Close-up of the power input terminals (0V, V+, DC 4-60V) and the dual SPI-TTL data output terminals (0V, Data, CLK, VCC for each output).

5. Konfiguracja

5.1. Połączenia fizyczne

1. Podłączenie zasilania: Connect the provided power supply to the "POWER" terminals (0V and V+) on the OCTO Mk2. Ensure the voltage is within the DC 4-60V range.
2. Połączenie Ethernet: Connect an Ethernet cable from your network switch or computer to the "IN" Ethernet port on the OCTO Mk2. For daisy-chaining, use the "THROUGH" port to connect to another network device.
3. LED Pixel Output: Connect your SPI LED strips or pixel dots to the "OUTPUTS" terminals. Each output provides connections for 0V (Ground), Data, CLK (Clock), and VCC (Power). Refer to your LED strip's specifications for correct wiring.

5.2. Network Configuration (Accessing the Web Berło)

The OCTO Mk2 features a built-in web interface for configuration. To access it, your computer needs to be on the same network as the OCTO Mk2.

1. Początkowe połączenie: Connect your computer directly to the OCTO Mk2 using an Ethernet cable, or ensure both are on the same local network.
2. Identify IP Address: The default IP address for the OCTO Mk2 is typically printed on the device or found in the quick start guide. If using DHCP, the device will obtain an IP address from your network.
3. Dostęp Web Interfejs: Otwórz web browser and enter the IP address of the OCTO Mk2 into the URL bar. This will open the device's configuration page.
4. Konfiguruj ustawienia sieciowe:
   • Przejdź do Ustawienia patka.
   • To assign a static IP address, uncheck the Włącz DHCP opcja.
   • Manually enter the desired Adres IP, Maska sieci, I Wejście. Ensure the IP address is unique on your network and within the same subnet as your control computer.
   • Trzask Stosować aby zapisać zmiany.

Refer to the datasheet image for an example z web interface settings:

Figure 5: Excerpt from the Enttec OCTO Mk2 datasheet, showing an overview z web interface with network and DMX port settings.

Figure 6: Excerpt from the Enttec OCTO Mk2 datasheet, detailing updated features like UL Certification, Overdrive Mode, Standalone Mode, and Free ELM Software License.

6. Tryby pracy

6.1. eDMX Control

The OCTO Mk2 supports various eDMX protocols for controlling your LED pixels from a compatible DMX software or console.

• Obsługiwane protokoły: Art-Net, sACN, ESP, and KiNet.
• Konfiguracja: W web interfejs pod DMX Port Settings, ustaw Typ to "Output (DMX Out)" and select your desired Protokół (e.g., Art-Net). Configure the Wszechświat settings (Net, Subnet, Uni) to match your DMX setup.
• Łączenie wyników: The device supports output merging options like "LTP Merge (Latest Takes Precedence)" to handle multiple DMX sources.

6.2. Standalone Mode with Inbuilt FX Engine

The OCTO Mk2 can operate in Standalone Mode, allowing you to create and run gradient effects directly from the device without an external DMX source.

• Access the inbuilt FX engine via the web interface to design and edit effects.
• Configure the device to run these standalone shows automatically upon power-up.

6.3. Overdrive Mode

Overdrive Mode allows the OCTO Mk2 to output more than 4 universes per port, boosting total output up to 16 universes. This feature is useful for managing a higher universe count.

• Note that utilizing Overdrive Mode may result in a lower maximum Frames Per Second (FPS). Evaluate your specific needs to determine its suitability.

7. Supported SPI LED Protocols

The OCTO Mk2 is compatible with a wide range of SPI LED protocols, including but not limited to:

• APA 104
• GS8208B
• SPXL (16-bit & 8-bit)
• SK6812
• TM1804, TM1812, TM1814
• UCS1903, UCS2903, UCS2904, UCS8903 (16-bit & 8-bit), UCS8904 (16-bit & 8-bit)
• WS2811, WS2812, WS2812B, WS2813, WS2815, WS2818
• AHL003 (16-bit & 8-bit)
• SJ1221 (16-bit & 8-bit)
• TLC5973 (16-bit & 8-bit)
• Ability to create custom pixel output protocols (refer to the user manual for criteria).

8. Konserwacja

• Czyszczenie: Do czyszczenia urządzenia należy używać miękkiej, suchej ściereczki. Nie należy używać środków czyszczących w płynie ani aerozolu.
• Aktualizacje oprogramowania układowego: Regularnie sprawdzaj Enttec.com for the latest firmware updates. Always review release notes for special instructions before updating.
• Składowanie: Przechowuj urządzenie w chłodnym, suchym miejscu, gdy nie jest używane.

9. Rozwiązywanie Problemów

• Brak zasilania: Check power connections and ensure the power supply is functioning correctly. Verify the input voltage mieści się w określonym zakresie.
• Brak połączenia sieciowego:
  • Sprawdź, czy kable Ethernet są solidnie podłączone.
  • Verify network settings (IP address, subnet mask, gateway) in the web interface are correct for your network.
  • If using a static IP, ensure it is unique and not conflicting with other devices.
• No DMX/Pixel Output:
  • Check the DMX Port Settings in the web interface (Type, Protocol, Universe).
  • Verify the wiring of your LED strips to the output terminals (Data, CLK, VCC, GND).
  • Use the Identify button on the device to check correct wiring without a data source.
  • Ensure your DMX control software is correctly configured to send data to the OCTO Mk2's IP address and universe.
• Lower FPS in Overdrive Mode: This is expected behavior. If higher FPS is critical, consider reducing the number of universes or adjusting your setup.

10. Specyfikacje

11. Gwarancja i wsparcie

For warranty information, technical support, and additional resources, please visit the official Enttec webmiejsce na www.enttec.pl. You can also find information regarding the free ELM software 8 Universe license and the latest firmware downloads there.