MOBI Smart Home 2.4GHz WiFi Water Leak Sensor User Manual

Wstęp

The MOBI Smart Home 2.4GHz WiFi Water Leak Sensor provides reliable 24/7 monitoring to protect your property from potential water damage. This device detects water leaks using its sensitive probes and sends real-time notifications directly to your smartphone via the MOBI Smart App. Designed for easy setup and use, it helps prevent costly damage from leaks in basements, near washing machines, hot water tanks, and other vulnerable areas. No hub or subscription is required for operation.

Image: Three MOBI Smart Water Leak Sensors and the accompanying mobile application interface.

Co jest w pudełku

Each MOBI Smart Home Water Leak Sensor package includes the following components:

• 1 x Smart Alert Sensor
• 1 x Detector Extension Cable (extends up to 48 inches)
• 2 x AAA Alkaline Batteries (pre-installed or included separately)
• 1 x taśma dwustronna
• 2 x śruby montażowe

Przewodnik po konfiguracji

1. Instalacja baterii

The sensor requires 2 AAA batteries for operation. Ensure they are correctly inserted according to the polarity markings inside the battery compartment. The included batteries are designed to last up to 2 years.

2. Instalacja i parowanie aplikacji

1. Pobierz MOBI Smart App ze sklepu z aplikacjami na Twoim smartfonie (iOS lub Android).
2. Otwórz aplikację i załóż konto lub zaloguj się.
3. Follow the in-app instructions to add a new device. Select the Water Leak Sensor from the list of available devices.
4. Upewnij się, że Twój smartfon jest podłączony do Sieć Wi-Fi 2.4 GHz. The sensor is compatible only with 2.4GHz networks.
5. The app will guide you through the pairing process, which typically involves putting the sensor into pairing mode (refer to the sensor's LED indicator for status).

Image: Sensor with power adapter, highlighting 2.4GHz Wi-Fi connection.

3. Umieszczenie czujnika

Strategically place the sensor in areas prone to water leaks. The detector probes are designed to detect even small amounts of liquid. Use the included double-sided tape or mounting screws to secure the main unit, and position the probe at the lowest point where water might accumulate.

• Piwnice: Near sump pumps, water heaters, or foundation walls.
• Pralnie: Behind or next to washing machines.
• Łazienki: Under sinks, near toilets, or bathtubs.
• Kuchnie: Under sinks, near dishwashers or refrigerators with water lines.
• Utility Rooms: Near hot water tanks, pipes, or HVAC units.

The 48-inch extension cable provides flexibility for reaching tight spaces or placing the main unit in a more accessible location while the probe remains at the detection point.

Image: Sensor probe with extended cable for flexible positioning near a water heater.

Image: Sensor placed near a washing machine to detect leaks.

Instrukcja obsługi

Real-Time Leak Detection and Alerts

Once set up, the MOBI Smart Water Leak Sensor continuously monitors for the presence of water. When the sensor probes detect liquid, it immediately triggers an alert. This alert is sent as a real-time notification to your smartphone via the MOBI Smart App, allowing you to respond quickly to potential water damage.

Image: Real-time alert system showing a water leak notification on the app.

App Features and Remote Monitoring

The MOBI Smart App serves as your central control and monitoring hub. You can view the status of all connected water leak sensors, review historical data, and manage settings. The app allows for remote monitoring, meaning you receive alerts and can check sensor status from anywhere with an internet connection.

• Ustawienia powiadomień: Customize how you receive alerts.
• Dziennik historii: Review past leak events and sensor activity.
• Powiadomienie o niskim stanie baterii: The app will alert you when the sensor's battery is low, ensuring continuous protection.
• Możliwość rozbudowy: The system supports connecting over 100 sensors, allowing comprehensive coverage for large properties.

Image: MOBI Smart App showing connectivity to multiple water leak sensors.

Konserwacja

Wymiana baterii

The sensor is powered by 2 AAA Alkaline batteries, which typically last up to 2 years. When the battery level is low, you will receive a notification through the MOBI Smart App. To replace the batteries:

1. Carefully open the battery compartment on the back of the sensor unit.
2. Wyjmij stare baterie AAA.
3. Insert new AAA Alkaline batteries, ensuring correct polarity.
4. Dokładnie zamknij komorę baterii.

Czyszczenie

To ensure optimal performance, periodically clean the sensor probes and the main unit with a soft, dry cloth. Avoid using abrasive cleaners or submerging the unit in water.

Rozwiązywanie problemów

For further assistance, please refer to the help section within the MOBI Smart App or contact MOBI customer support.

Specyfikacje

Gwarancja i wsparcie

For information regarding product warranty, returns, or technical support, please refer to the official MOBI website or contact MOBI customer service directly. Details can typically be found on the product packaging or within the MOBI Smart App's support section.

Możesz odwiedzić MOBI Store on Amazon Więcej produktów i informacji.