1. Koniec produktuview
The Summer Waves P10008305 Quick Set Inflatable Pool is designed for easy setup and family enjoyment. This 8-foot wide pool features a transparent design with vivid 3D ocean life graphics on the bottom, creating an immersive underwater experience. It includes two pairs of 3D goggles for enhanced viewing of the graphics. Constructed with durable 3-ply Toughmesh materials, this pool is built for lasting use.
Główne cechy obejmują:
- Quick Set Technology: Inflate the top ring, and the pool rises as it fills with water, ready in approximately 10 minutes.
- 3D Deep Sea Graphics: Engaging ocean animal graphics on the pool bottom, visible with included 3D goggles.
- Trwała konstrukcja: Made from puncture-resistant 3-ply Toughmesh material.
- Dołączone akcesoria: Two pairs of 3D goggles and a repair patch.
2. Instrukcje konfiguracji
Aby szybko i łatwo skonfigurować basen, wykonaj poniższe czynności:
- Wybór miejsca: Choose a firm, level surface free of rocks, sharp objects, or debris. Ensure the area is large enough for the pool and surrounding activity.
- Rozłóż basen: Carefully unroll and spread out the pool liner in the chosen location. Ensure the drain plug is accessible and closed.
- Napompuj górny pierścień: Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm but not over-inflated.
- Napełnij wodą: Begin filling the pool with water. As the water level rises, the inflatable top ring will float, and the pool walls will expand upwards. Smooth out any wrinkles in the bottom of the pool as it fills.
- Monitoruj poziom wody: Fill the pool to the recommended fill line, typically indicated on the inside of the pool wall. Do not overfill.
Image: The Summer Waves Quick Set Inflatable Pool, showing a family enjoying the pool on a sunny day. The transparent sides and 3D graphics are visible.
3. Operating the Pool and 3D Goggles
Once the pool is set up and filled, it is ready for use. Always supervise children when they are in or near the pool.
Using the 3D Goggles:
The pool features special 3D ocean life graphics on its bottom. To experience the full effect:
- Put on one of the included 3D goggles.
- Submerge your head underwater and look at the pool bottom. The graphics will appear to come to life, creating a unique underwater adventure.
Image: Two pairs of blue 3D goggles, designed for viewing the pool's underwater graphics.
Image: A close-up of the vibrant 3D deep sea ocean life graphics printed on the pool's bottom.
4. Konserwacja
Proper maintenance ensures the longevity and cleanliness of your pool.
Pielęgnacja wody:
- Regularly check and maintain water chemistry (pH, chlorine levels) if using pool chemicals.
- Codziennie usuwaj zanieczyszczenia z powierzchni wody.
- Consider using a pool cover when not in use to keep out leaves and dirt.
Cleaning the Pool:
- Periodically drain and clean the pool liner with mild soap and water. Rinse thoroughly.
- Ensure the pool is completely dry before refilling or storing.
Naprawa przebić:
A repair patch is included for minor punctures. To use:
- Zlokalizuj przebicie.
- Dokładnie oczyść i osusz obszar wokół nakłucia.
- Cut the repair patch to a size slightly larger than the puncture.
- Dokładnie przyłóż plaster do nakłucia, wyciskając wszelkie pęcherzyki powietrza.
- Allow sufficient time for the adhesive to cure before refilling the pool.
Składowanie:
- Całkowicie opróżnij basen za pomocą korka spustowego.
- Clean and dry all surfaces thoroughly to prevent mold and mildew.
- Deflate the top ring.
- Fold the pool neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
5. Rozwiązywanie Problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Pool is losing air from top ring. | Puncture in the inflatable ring or loose valve cap. | Check valve cap for tightness. Locate puncture and use the included repair patch. |
| Water level is decreasing. | Wyciek w wyściółce basenu lub korek spustowy nie jest całkowicie zamknięty. | Ensure drain plug is securely closed. Inspect pool liner for punctures and apply repair patch if found. |
| Pool walls are not rising properly during filling. | Top ring not sufficiently inflated or pool not on a level surface. | Ensure the top ring is firmly inflated. Verify the pool is on a completely level surface. |
| Woda wydaje się mętna lub brudna. | Lack of proper water treatment or debris accumulation. | Skim debris regularly. Consider using appropriate pool chemicals (e.g., chlorine, clarifier) and a filter pump if desired (not included). |
6. Specyfikacje produktu
- Numer modelu: P10008305
- Marka: Letnie fale
- Wymiary (dł. x szer. x wys.): 96 x 96 x 30 inches (8 feet wide, 30 inches deep)
- Kształt: Okrągły
- Tworzywo: Durable 3-ply Toughmesh
- Czas montażu: Około 10 minut
- Cechy szczególne: Inflatable top ring, Drain Hole, Lightweight, 3D Ocean Life Graphics
- Dołączone akcesoria: 2 pairs of 3D Goggles, Repair Patch
- Grupa docelowa: Kid (Unisex-Kids)
- Kod UPC: 192072028201
- ASIN: B08RGLRMG4
7. Gwarancja i wsparcie
Informacje o gwarancji:
Specific warranty details for the Summer Waves P10008305 pool are typically provided with the product at the time of purchase. Please refer to the packaging or any enclosed documentation for the most accurate and up-to-date warranty terms and conditions. Keep your proof of purchase for warranty claims.
Obsługa klienta:
For further assistance, questions, or to report any issues not covered in this manual, please contact Summer Waves customer support. Contact information can usually be found on the product packaging or the official Summer Waves webstrona.
Producent: Poligrupa
Webstrona: www.polygroup.com (Ogólny producent website, specific product support may vary)