Wstęp
This manual provides instructions for the GDSTIME Quiet Dual 120mm USB Fan. This product is designed to enhance airflow and cooling for various electronic devices and components, such as AV receivers, DVRs, gaming consoles (PlayStation, Xbox), routers, computers, and cabinet enclosures. The dual fan system is powered via a USB connection and features a speed control for adjustable performance.
Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:
- 2x 5V USB Fan (120x120x25mm)
- 4x Silver tone wire finger grills (120mm)
- 1x 2-in-1 USB Cable with Speed Controller
- 8x Mounting screws and nuts

Image: All components included in the GDSTIME Dual 120mm USB Fan package.
Cechy produktu
- Dual 120mm USB Fans: Provides efficient cooling for various electronics.
- Zasilane przez USB: Connects to standard USB ports (DC 5V) found on many devices or power adapters.
- 3-biegowa kontrola: Adjustable fan speed (High, Medium, Low, Off) for optimal airflow and noise balance.
- Protective Metal Grills: Features metal grills on both sides to prevent accidental contact with fan blades and protect against foreign objects.
- Trwała konstrukcja: Fans are constructed with PBT frames and blades for long service life.
- Silnik z czystej miedzi: Equipped with a pure copper motor for high temperature resistance and energy efficiency.
- Wszechstronne rozmieszczenie: Can be positioned to stand upright or laid flat to suit various cooling needs.

Image: Illustration of the fan's PBT frame, blades, and pure copper motor.

Image: The metal grills on the fans, designed for protection.
Instrukcje konfiguracji
- Rozpakuj komponenty: Carefully remove all items from the packaging and ensure all listed package contents are present.
- Attach Metal Grills: Secure the four metal finger grills to the fans using the provided screws and nuts. Ensure they are firmly attached to prevent vibration.
- Pozycja fanów: Place the fans in the desired location to optimize airflow for your electronic device. The fans can be laid flat or stood upright. Consider the direction of airflow needed (intake or exhaust).
- Podłącz kabel USB: Plug the 2-in-1 USB cable into the fans. Then, connect the USB plug to a compatible 5V USB power source. This can be a USB port on your device (e.g., gaming console, router), a USB wall adapter, or a power bank.

Obraz: Byłyamples of USB power sources for the fan.

Image: Various application scenarios for the dual USB fan.
Instrukcja obsługi
The GDSTIME Dual 120mm USB Fan features an inline speed controller to adjust fan performance. Locate the controller on the USB cable.
- Włączanie/wyłączanie: Slide the switch to 'O' to turn the fans off.
- Dostosuj prędkość: Slide the switch to 'L' for minimal noise, 'M' for most applications (balanced airflow), or 'H' for maximum airflow.

Image: The 3-speed controller for adjusting fan performance.
Konserwacja
Regularna konserwacja zapewnia optymalną wydajność i długowieczność wentylatorów.
- Czyszczenie: Periodically disconnect the fans from power and gently wipe the fan blades and grills with a soft, dry cloth to remove dust. For stubborn dust, a can of compressed air can be used.
- Kontrola: Check the USB cable and fan blades for any signs of damage. Do not operate if damage is observed.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Fans do not spin | No power, loose connection, speed controller set to 'Off' | Ensure USB cable is securely connected to both fans and power source. Check if the speed controller is set to 'L', 'M', or 'H'. Try a different USB port or power source. |
| Fans are too noisy | Fan speed set too high, dust accumulation, fan obstruction | Reduce fan speed using the controller. Clean fan blades and grills. Ensure no objects are obstructing the fan blades. |
| Niewystarczające chłodzenie | Fan speed too low, improper placement, blocked airflow | Increase fan speed. Adjust fan position to optimize airflow. Ensure intake and exhaust paths are clear. |
Dane techniczne
| Specyfikacja | Wartość |
|---|---|
| Wymiary produktu (na wentylator) | 4.72" dł. x 4.72" szer. x 0.98" wys. (120 x 120 x 25 mm) |
| Tomtage | Prąd stały 5 V |
| Aktualny | 0.2 Amp |
| Cotage | 1 waty |
| Maksymalna prędkość obrotowa | 1500 obr./min. |
| Całkowity przepływ powietrza | 2x 65 CFM |
| Poziom hałasu | 26 dBA |
| Namiar | Hydrauliczny |
| Długość życia | 40,000 godzin |
| Tworzywo | Metal (grills), PBT (frame/blades) |
| Waga przedmiotu | 4.3 uncji |

Image: Detailed dimensions and key specifications of the fan system.
Gwarancja i wsparcie
GDSTIME products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact the retailer where the product was purchased. Keep your purchase receipt for warranty claims.