Renkforce DS100-8M

Renkforce DS100-8M Slide Scanner User Manual

Model: DS100-8M

Wstęp

Dziękujemy za zakupasing the Renkforce DS100-8M Slide Scanner. This device is designed to digitalize 35mm slides and film negatives, converting them into high-resolution digital images. This manual provides essential information for the safe and efficient operation of your scanner. Please read it thoroughly before use and retain it for future reference.

Instrukcje bezpieczeństwa

  • Sprawdź, czy zasilacz ma odpowiednią głośnośćtage pasuje do lokalnego źródła zasilania.
  • Nie wystawiaj urządzenia na działanie wilgoci, deszczu i ekstremalnych temperatur.
  • Avoid disassembling the scanner. Refer all servicing to qualified personnel.
  • Trzymaj urządzenie z dala od bezpośredniego światła słonecznego i źródeł ciepła.
  • Należy używać wyłącznie akcesoriów dostarczonych lub zalecanych przez producenta.
  • Odłączaj urządzenie od zasilania podczas burzy z piorunami lub jeśli nie używasz go przez dłuższy czas.

Zawartość opakowania

Proszę sprawdzić zawartość opakowania po rozpakowaniu. Jeśli brakuje któregokolwiek elementu lub jest on uszkodzony, prosimy o kontakt ze sprzedawcą.

  • Renkforce DS100-8M Slide Scanner
  • USB Power Adapter
  • Kabel USB
  • Uchwyt na slajdy
  • Uchwyt do negatywów
  • Szczotka do czyszczenia
  • TV-Out Cable (RCA to 3.5mm jack)
  • Instrukcja obsługi (ten dokument)
Renkforce DS100-8M scanner and accessories laid out

Image: Renkforce DS100-8M scanner with all included accessories, including power adapter, USB cable, film holders, and cleaning brush.

Produkt ponadview

Przód View

Przód view of Renkforce DS100-8M scanner with display and control buttons

Obraz: Przód view of the Renkforce DS100-8M scanner, showing the LCD display, control buttons (Power, OK/Enter, Convert/Mode, Left/Mirror, Right/Flip), and the film slot.

  1. Wyświetlacz LCD: Shows menus, preview images, and settings.
  2. Przycisk zasilania: Włącza/wyłącza urządzenie.
  3. Przycisk OK/Enter: Confirms selections or takes a scan.
  4. Convert/Mode Button: Switches between scanning modes (film/slide) or menu options.
  5. Left/Mirror Button: Navigates left in menus or mirrors the image.
  6. Right/Flip Button: Navigates right in menus or flips the image.
  7. Miejsce na film: Insert film holders here.

Tył View

Tył view of Renkforce DS100-8M scanner with ports

Obraz: Tył view of the Renkforce DS100-8M scanner, showing the SD card slot, TV OUT port, and Mini USB port.

  1. Gniazdo karty SD: Insert an SD/SDHC card (up to 32GB, not included) for saving scanned images. Ensure gold contacts face up.
  2. TV OUT Port: Connect to a TV using the provided cable to view images on a larger screen.
  3. Port mini USB: Connect to a computer for data transfer or to the power adapter for power supply.

Organizować coś

  1. Włóż kartę SD: Insert an SD or SDHC memory card (not included) into the SD card slot on the rear of the scanner. Ensure the gold contacts face upwards. The scanner requires a memory card to save scanned images.
  2. Podłącz zasilanie: Connect the small end of the USB cable to the Mini USB port on the scanner. Connect the large end of the USB cable to the provided USB power adapter, then plug the adapter into a wall outlet. Alternatively, connect the large end of the USB cable to a powered USB port on a computer.
  3. Włączanie: Naciśnij i przytrzymaj Moc button for a few seconds until the LCD display illuminates.
  4. Language Setting (First Use): If prompted, use the Left/Mirror I Right/Flip buttons to select your preferred language, then press OK/Wprowadź aby potwierdzić.

Obsługa skanera

Preparing Film/Slides

  • For 35mm Slides: Open the slide holder. Insert one slide into the designated slot, ensuring it is correctly oriented. Close the holder securely.
  • For 35mm Film Negatives: Open the negative film holder. Carefully place a strip of negatives into the holder, aligning the frames with the openings. Close the holder securely.
  • Use the cleaning brush to gently remove any dust or debris from your slides or negatives before inserting them into the holder.

Proces skanowania

  1. Uchwyt wkładki: Gently insert the loaded slide or negative film holder into the film slot on the side of the scanner.
  2. Wybierz typ filmu: On the scanner's display, use the Convert/Mode button to select the correct film type (Negative Film or Slide Film).
  3. Adjust Image (Optional):
    • Używać Left/Mirror to mirror the image horizontally.
    • Używać Right/Flip to flip the image vertically.
    • Access the menu (often by pressing OK/Wprowadź or Convert/Mode again) to adjust exposure compensation or color balance if available. Navigate with Left/Mirror I Right/Flip, potwierdź za pomocą OK/Wprowadź.
  4. Skanuj obraz: Once the image is correctly framed and adjusted on the display, press the OK/Wprowadź button to capture the image. The scanner will save the image to the inserted SD card.
  5. Film promocyjny: Remove the holder, advance the film/slide to the next frame, and re-insert the holder to scan the next image.

Tryb odtwarzania

Do view scanned images directly on the scanner's display or a connected TV:

  1. From the main menu, select "Playback" or press the Convert/Mode button until you reach playback mode.
  2. Użyj Left/Mirror I Right/Flip buttons to navigate through your saved images.
  3. To delete an image, select it and look for a "Delete" option in the menu, then confirm.

Podłączanie do telewizora

Do view your scans on a larger screen:

  1. Sprawdź, czy skaner jest wyłączony.
  2. Connect the provided TV-Out cable to the "TV OUT" port on the scanner and the corresponding video input (usually yellow RCA) on your television.
  3. Power on the scanner and select the correct AV input on your TV. The scanner's display content will now be mirrored on your TV.

Connecting to a Computer (Data Transfer)

To transfer scanned images to your computer:

  1. Sprawdź, czy skaner jest włączony.
  2. Connect the USB cable from the scanner's Mini USB port to a USB port on your computer.
  3. The scanner should appear as a removable disk drive on your computer. You can then access the images stored on the SD card.
  4. Always safely eject the removable disk from your computer before disconnecting the USB cable.

Konserwacja

  • Czyszczenie obiektywu: Use the provided cleaning brush to gently remove dust from the scanner's lens and film slot. Do not use liquid cleaners or abrasive materials.
  • Czyszczenie powierzchni zewnętrznej: Wipe the exterior of the scanner with a soft, dry cloth. Do not use chemical cleaners.
  • Składowanie: When not in use, store the scanner in a cool, dry place, away from direct sunlight and dust.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Skaner się nie włącza.Brak zasilania lub luźne połączenie.Ensure the USB cable is securely connected to both the scanner and the power source. Verify the power adapter is plugged into a working outlet.
Images are blurry or dusty.Dust on film/slides or scanner lens.Clean the film/slides with the cleaning brush before scanning. Use the cleaning brush to gently clean the scanner's lens.
Nie można zapisać obrazów.No SD card inserted, SD card full, or SD card error.Insert a compatible SD/SDHC card. Check if the card is full and delete unnecessary files or use a new card. Ensure the card is not write-protected.
Images appear too dark/light.Incorrect exposure setting.Adjust the exposure compensation setting in the scanner's menu.
Brak obrazu w telewizji.Incorrect TV input or loose cable.Ensure the TV-Out cable is securely connected. Select the correct AV input channel on your television.

Specyfikacje

  • Typ produktu: Slide and Negative Film Scanner
  • Model: DS100-8M
  • Czujnik obrazu: 8 megapikseli CMOS
  • Rozdzielczość skanowania: 3200 dpi (interpolated to 4000 dpi)
  • Film Types: 35mm Slides (positive), 35mm Negatives (color and black & white)
  • Wyświetlacz: Kolorowy wyświetlacz LCD
  • Centrum: Stały fokus
  • Kontrola ekspozycji: Automatic / Manual adjustment
  • Balans kolorów: Automatic / Manual adjustment
  • Źródło światła: Podświetlenie LED
  • Pamięć wewnętrzna: None (requires SD/SDHC card)
  • Pamięć zewnętrzna: SD/SDHC card up to 32GB (not included)
  • Interfejs: USB 2.0 (for power and data transfer), TV-Out (RCA)
  • Zasilanie: 5 V DC przez USB
  • Zgodność z systemem operacyjnym: Windows XP/Vista/7/8/10, macOS (for data transfer)

Gwarancja i wsparcie

Renkforce products are designed for reliability and performance. For information regarding warranty terms, technical support, or service, please refer to the warranty card included with your purchase or visit the official Renkforce website. Please have your model number (DS100-8M) and purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.