TSL ROI-E420

TSL ROI-E420 LED Grow Light User Manual

Marka: TSL | Model: ROI-E420

1. Wprowadzenie

The TSL ROI-E420 Horticulture LED System is a high-performance lighting solution designed for commercial horticulture applications. This system integrates advanced LED technology to provide a balanced spectrum, utilizing Grower's Choice 3K CMH Full Phase Spectrum for optimal plant growth. It delivers a total output of 1090 µmol/s with a system efficacy of 2.6 µmol/J.

2. Informacje dotyczące bezpieczeństwa

  • Przed instalacją, konserwacją lub czyszczeniem należy zawsze odłączyć zasilanie.
  • Ensure the installation area is dry and free from excessive moisture. This product has a Water Resistance Level of Waterproof, but proper electrical safety precautions should always be observed.
  • Do not look directly into the LED lights when the unit is operating, as this may cause eye strain or damage.
  • Ensure the mounting structure can safely support the weight of the fixture.
  • Trzymaj lampę z dala od materiałów łatwopalnych.
  • Only use the provided power cord and accessories.

3. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:

  • TSL ROI-E420 LED Grow Light Fixture
  • Sprzęt montażowy
  • Przewód zasilający

4. Konfiguracja i instalacja

The TSL ROI-E420 LED Grow Light is designed for ceiling mount installation. The fixture comes pre-assembled and does not require complex assembly.

4.1 Unfolding the Fixture

Carefully unfold the LED light bars until they are fully extended. The fixture features a hinge mechanism with an integrated level to assist in proper alignment.

Close-up of the TSL ROI-E420 LED Grow Light's hinge mechanism with an integrated spirit level.

Figure 1: Hinge mechanism with integrated level for precise unfolding.

4.2 Montaż światła

Use the included mounting hardware to securely attach the fixture to a sturdy ceiling structure. Ensure the light is level and stable before proceeding.

The TSL ROI-E420 LED Grow Light fully unfolded and ready for installation.

Figure 2: TSL ROI-E420 LED Grow Light in its fully unfolded configuration.

4.3 Podłączenie elektryczne

Connect the power cord to the fixture and then to a suitable electrical outlet. The light operates on a Corded Electric power source.

5. Instrukcja obsługi

The TSL ROI-E420 LED Grow Light offers multiple control methods for adjusting its operation.

5.1 Sterowanie ściemnianiem

The fixture is equipped with a dimmer switch, allowing you to adjust the light intensity. Rotate the dimmer knob clockwise to increase brightness and counter-clockwise to decrease it.

Close-up of the control panel on the TSL ROI-E420 LED Grow Light, showing the dimmer knob and control ports.

Figure 3: Control panel with dimmer knob and ports.

5.2 Remote and App Control

The ROI-E420 supports remote control and app control functionalities. Refer to the separate instructions for pairing with a remote control or connecting to the dedicated mobile application for advanced settings and scheduling.

6. Konserwacja

Regular maintenance ensures optimal performance and longevity of your LED grow light.

  • Czyszczenie: Periodically clean the light fixture and LED surfaces with a soft, dry cloth. Ensure the unit is unplugged and cool before cleaning. Do not use abrasive cleaners or solvents.
  • Kontrola: Regularly inspect the power cord for any signs of damage. Check mounting hardware for tightness.
  • Wentylacja: Ensure adequate airflow around the fixture to prevent overheating.

7. Rozwiązywanie Problemów

If you encounter issues with your TSL ROI-E420 LED Grow Light, refer to the following common solutions:

  • Światło nie włącza się:
    • Sprawdź, czy przewód zasilający jest prawidłowo podłączony do urządzenia i gniazdka elektrycznego.
    • Sprawdź, czy gniazdko elektryczne jest sprawne.
    • Ensure the dimmer knob is not set to the lowest (off) position.
  • Migotanie światła:
    • Sprawdź, czy połączenia przewodu zasilającego nie są luźne.
    • Upewnij się, że zasilanie jest stabilne.
  • Dimming Not Responding:
    • Ensure the dimmer knob is clean and free of obstructions.
    • If using remote/app control, check battery levels or connection status.

8. Specyfikacje

Numer modeluROI-E420
MarkaTSL
Cotage420 watów
Tomtage10 V (prąd stały)
Źródło światłaPROWADZONY
Jasność746 lumenów
Efektywność2.6 µmol/J
Metoda kontroliAplikacja, zdalne sterowanie
Typ przełącznikaOpornik
Zastosowanie wewnątrz/na zewnątrzWnętrz
Typ montażuMontaż sufitowy
Poziom wodoodpornościWodoodporny
Materiał zacieniającyAluminium
KolorSilver or Gray

9. Gwarancja i wsparcie

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

© 2023 TSL. Wszelkie prawa zastrzeżone.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.