FUERS G34 4G GSM/WiFi Home Alarm System User Manual

1. Koniec produktuview

The FUERS G34 is an advanced 4G GSM/WiFi home alarm system designed to provide comprehensive security for your property. It features a 2.4-inch TFT color screen, touch keypad, and supports various wireless and wired sensors. The system can be controlled via call, SMS, or the Tuya Smart App, and is compatible with Alexa and Google Home for voice control.

1.1 Główne elementy panelu

Obraz 1.1: Przód i tył view of the FUERS G34 alarm panel, highlighting key components and dimensions.

• Panel przedni:
  • Ekran TFT o przekątnej 2.4 cala: Displays system status, time, and settings.
  • Głośnik: Aby uzyskać alerty dźwiękowe i komunikaty głosowe.
  • Przycisk alarmowy SOS: Triggers an immediate alarm and sends notifications.
  • RFID Card Reading Area: For quick arming/disarming with RFID tags.
  • Klawiatura dotykowa: For entering codes and navigating menus.
• Tylny panel:
  • Anty-sabontage Przełącznik: Detects unauthorized removal of the panel.
  • Siren Hole: Output for external wired siren.
  • Przełącznik włącz / wyłącz: Main power switch for the panel.
  • SIM Card Slot (2G/3G/4G Support): For GSM/4G communication.
  • Wired Zone Terminals: Do podłączania czujników przewodowych.
  • Port zasilania prądem stałym 5 V: Do podłączenia zasilacza.
  • Mikrofon: For two-way audio communication (if supported by specific models/firmware).

1.2 Komponenty systemu

Obraz 1.2: The FUERS G34 system supports a variety of wireless and wired sensors, including PIR motion detectors, door/window sensors, smart plugs, IP cameras, and water detectors.

The FUERS G34 system supports up to 100 wireless zones and 3 wired zones, allowing for extensive coverage and customization with various sensors and accessories. These include:

• Czujki ruchu PIR
• Czujniki drzwi/okien
• Inteligentne wtyczki
• Kamery IP
• Water Detectors
• Smoke Detectors (not explicitly shown but common)
• Zdalne sterowanie
• RFID Tags

2. Instrukcje konfiguracji

2.1 Włączanie panelu głównego

1. Connect the provided DC 5V power adapter to the power port on the rear of the main panel.
2. Podłącz adapter do standardowego gniazdka ściennego.
3. Flip the ON/OFF switch on the rear of the panel to the "ON" position. The panel will power on and display the boot screen.

2.2 Instalacja karty SIM

Obraz 2.1: The FUERS G34 system supports a standard SIM card for 2G/3G/4G GSM communication. Ensure the SIM card is correctly inserted.

1. Ensure the main panel is powered off before inserting the SIM card.
2. Locate the SIM card slot on the rear of the panel.
3. Insert a standard 2G/3G/4G SIM card into the slot, ensuring the correct orientation. The system primarily uses 2G GSM for alarm calls/SMS, but 4G SIMs are compatible.
4. Power on the panel. The system will attempt to register with the cellular network.

2.3 Połączenie Wi-Fi

The FUERS G34 supports 2.4GHz Wi-Fi networks for app control and notifications.

1. On the main panel, navigate to the "Settings" menu.
2. Select "Wi-Fi Settings" or "Network Settings".
3. Enable Wi-Fi and select your 2.4GHz Wi-Fi network from the list.
4. Enter your Wi-Fi password using the touch keypad.
5. Confirm the connection. The panel should display a Wi-Fi connected icon.

2.4 Parowanie czujników bezprzewodowych i akcesoriów

The system supports up to 100 wireless sensors and 10 RFID tags.

1. Na panelu głównym przejdź do menu „Części” lub „Akcesoria”.
2. Select "Add Sensor" or "Add Remote/RFID".
3. Follow the on-screen prompts to put the panel into learning mode.
4. Activate the sensor (e.g., open a door/window for a door sensor, press the button on a remote, or swipe an RFID tag).
5. The panel will confirm successful pairing. Assign the sensor to a specific zone and name it for easy identification.

3. Instrukcja obsługi

3.1 Uzbrajanie i rozbrajanie systemu

Obraz 3.1: The alarm panel showing arm and disarm functions, along with other key features like TFT screen, SOS button, RFID support, and voice prompt.

• Arm (Full Arm): Press the "Arm" button on the panel, remote control, or use the mobile app/RFID tag. All configured sensors will be active.
• Rozbrajać: Enter your password on the keypad, press the "Disarm" button on the remote control, or use the mobile app/RFID tag. The system will deactivate all sensors.
• Ramię domowe (ramię pozostające): Activates perimeter sensors (e.g., door/window sensors) while allowing movement within the property. This is typically activated via the app or a specific button on the remote.

3.2 Funkcja alarmowa SOS

The SOS button is for immediate emergency situations.

• Press the large "SOS" button on the front of the main panel.
• The system will immediately trigger an alarm, sound the siren, and send emergency calls/SMS to pre-programmed numbers.
• This function operates regardless of the system's arming status.

3.3 Korzystanie z kart RFID

RFID cards provide a quick and convenient way to arm or disarm the system.

• To arm or disarm, simply swipe a pre-registered RFID card over the RFID card reading area on the front panel.
• The system will provide an audible confirmation of the action.

3.4 Mobile App Control (Tuya Smart)

Obraz 3.2: The Tuya Smart App interface for remote control and integration with Amazon Alexa and Google Assistant for voice commands.

1. Pobierz aplikację „Tuya Smart” ze sklepu z aplikacjami na swoim smartfonie (iOS lub Android).
2. Zarejestruj konto i zaloguj się.
3. Add the FUERS G34 alarm system as a new device within the app, following the on-screen instructions. Ensure your phone and the alarm panel are connected to the same 2.4GHz Wi-Fi network during initial pairing.
4. Once connected, you can remotely arm/disarm the system, check status, receive notifications, and manage sensors from anywhere with an internet connection.

3.5 Sterowanie głosowe (Alexa/Google Home)

The FUERS G34 system integrates with Amazon Alexa and Google Home for convenient voice control.

1. Ensure your FUERS G34 system is successfully connected to the Tuya Smart app.
2. Otwórz aplikację Amazon Alexa lub Google Home na swoim smartfonie.
3. Enable the "Tuya Smart" skill/service within the respective app.
4. Połącz swoje konto Tuya Smart.
5. Discover devices. Your FUERS G34 alarm system should appear.
6. Możesz teraz używać poleceń głosowych takich jak:
   • „Alexa, uzbrój system alarmowy.”
   • "Hey Google, disarm the alarm." (May require a PIN for disarming)

4. Główne cechy

4.1 Dual Network Connectivity (4G GSM & Wi-Fi)

The system utilizes both 4G GSM and Wi-Fi networks for reliable communication. In case one network fails, the other acts as a backup, ensuring continuous monitoring and notification delivery.

4.2 Door/Window Unclosed Reminder

Obraz 4.1: The alarm panel displaying a reminder if a door or window is left open, preventing arming until secured.

Before arming the system, the panel will check the status of all configured door/window sensors. If any are detected as open, the system will issue a reminder on the LCD screen and an audible prompt, preventing arming until all entry points are secured.

4.3 Multi-Zone Support

The system supports up to 100 wireless defense zones and 3 wired defense zones, allowing for flexible configuration and monitoring of different areas of your home.

4.4 Pet-Immune Detector Compatibility

Compatible with pet-immune PIR motion detectors, which are designed to ignore pets up to a certain weight, reducing false alarms while maintaining security.

4.5 Voice Prompt Function

The system provides clear voice prompts for various operations and status changes, making it user-friendly for all ages.

4.6 Planowane uzbrajanie/rozbrajanie

Allows users to set specific times for the system to automatically arm or disarm, enhancing convenience and security routines.

5. Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the main panel and sensors. Avoid abrasive cleaners or solvents.
• Sprawdzenie baterii: Periodically check the battery status of wireless sensors and replace batteries as needed. The main panel has a built-in backup battery; ensure it is charged.
• Test systemu: Regularly test the alarm system by triggering a sensor (e.g., opening a door) to ensure it functions correctly and sends notifications.
• Aktualizacje oprogramowania układowego: Check the Tuya Smart app or manufacturer's website for any available firmware updates for the main panel to ensure optimal performance and security.

6. Rozwiązywanie Problemów

• System Not Arming:
  • Check if any door/window sensors are open. Close all entry points.
  • Ensure all sensors are properly paired and functioning.
• No Notifications via App/SMS:
  • Verify Wi-Fi connection on the main panel.
  • Check SIM card status and ensure it has an active plan with sufficient credit for calls/SMS.
  • Confirm notification settings in the Tuya Smart app.
• Fałszywe alarmy:
  • Ensure PIR motion detectors are installed in areas free from drafts, direct sunlight, or moving objects (curtains, pets).
  • Sprawdź poziom naładowania baterii czujnika.
  • Verify sensor placement and sensitivity settings.
• Sterowanie głosowe nie działa:
  • Ensure the Tuya Smart skill/service is enabled and linked in your Alexa/Google Home app.
  • Verify the alarm system is online and connected to the Tuya Smart app.
  • Use the exact voice commands as specified by Alexa/Google Home for Tuya devices.

7. Specyfikacje