WORKPRO 20V 4.0Ah Lithium-Ion Battery

Wstęp

Thank you for choosing the WORKPRO 20V 4.0Ah Lithium-Ion Battery. This battery is designed to provide reliable power for your WORKPRO 20V cordless power tools. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your battery.

Informacje dotyczące bezpieczeństwa

Always observe the following safety precautions when using, charging, or storing your battery:

• Use only with compatible WORKPRO 20V chargers and tools.
• Nie wystawiaj akumulatora na działanie wody, wilgoci ani ekstremalnych temperatur.
• Unikaj zwarcia zacisków akumulatora.
• Nie należy podejmować prób demontażu, otwierania ani serwisowania akumulatora.
• Protect against incorrect voltage, overcharge, and internal overheating. The battery features built-in protection functions.
• Przechowuj akumulator w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i źródeł ciepła.
• Baterie należy utylizować odpowiedzialnie, zgodnie z lokalnymi przepisami. Nie wyrzucać do odpadów domowych.

Produkt ponadview

The WORKPRO 20V 4.0Ah Lithium-Ion Battery is a high-quality, rechargeable power source for your cordless tools. It weighs approximately 700g and contains 10 individual 3.7V 18650-4000mAh Lithium-ion cells.

Przód-strona view of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showcasing its compact design and power indicator lights.

An exploded diagram illustrating the internal components of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, including individual battery cells and circuit board.

Wskaźnik zasilania

The battery is equipped with 4 LED indicator lights that show the real-time charge status. Simply press the power indicator button to check the remaining battery life.

Zbliżenie view of a finger pressing the power indicator button on the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showing the illuminated charge status lights.

Konfiguracja i instalacja

To install or remove the battery from your WORKPRO 20V cordless tool:

1. Ensure the tool is turned off and disconnected from any power source.
2. Dopasuj akumulator do gniazda akumulatora w narzędziu.
3. Press the release button (if applicable) on the battery or tool, and slide the battery firmly into place until it clicks.
4. Aby wyjąć baterię, naciśnij przycisk zwalniający i wysuń baterię.

An image demonstrating the process of installing or removing the WORKPRO 20V 4.0Ah Lithium-Ion Battery from a compatible power tool by pressing the release button.

Zgodność

This battery is exclusively compatible with the WORKPRO 20V cordless power tool series, including but not limited to:

• Ćwiczenia
• Wkrętaki udarowe
• Klucze udarowe
• Szlifierki kątowe
• Piły szablaste
• Nożyce do żywopłotu
• Piły tyczkowe
• And other WORKPRO 20V tools (e.g., W004578AU, W122039AU, W125049AU, W125062AU, W159007AU, W159009AU).

The WORKPRO 20V 4.0Ah Lithium-Ion Battery centrally placed, surrounded by various compatible WORKPRO 20V cordless power tools such as drills, impact drivers, and hedge trimmers, illustrating its versatility.

Instrukcja obsługi

Ładowanie akumulatora

To charge your WORKPRO 20V 4.0Ah Lithium-Ion Battery:

1. Ensure you are using an official WORKPRO 20V battery charger.
2. Podłącz ładowarkę do odpowiedniego gniazdka elektrycznego.
3. Slide the battery onto the charger until it is securely seated.
4. The charger's indicator lights will show the charging status. Refer to your charger's manual for specific light patterns.
5. Once fully charged, remove the battery from the charger. Do not leave the battery on the charger for extended periods after it is fully charged.

The battery has no memory effect, allowing it to be charged freely without needing to be fully discharged first.

Konserwacja i przechowywanie

Proper maintenance and storage will extend the life of your battery:

• Czyszczenie: Keep the battery terminals clean and free of debris. Use a dry cloth to wipe the battery exterior.
• Składowanie: For long-term storage, store the battery in a cool, dry place, ideally at room temperature (20-25°C or 68-77°F). Store the battery with a partial charge (around 50%) rather than fully charged or fully discharged.
• Temperatura: Unikaj przechowywania i używania akumulatora w warunkach ekstremalnie wysokich lub niskich temperatur.
• Regularne stosowanie: If storing for extended periods, it is recommended to charge the battery to about 50% every 3-6 months to prevent deep discharge.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical support, please refer to the documentation included with your original purchase or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO webodwiedź witrynę lub skontaktuj się z ich kanałami obsługi klienta.